Owner's manual

5dB steps, and the line section provides +10 to -20dB

of adjustment.

EQ Switch-

This switch turns the equalizer section on.

Ø Switch-

This switch reverses the phase of the unit 180°.

Four position LED array-

The first LED indicates that the unit has power turned

on.

The second LED indicates the presence of signal.

The third LED indicates the presence of a +4 dB

signal.

The fourth LED indicates the presence of a peak

amplitude signal.

Filter-

This is a high pass filter with 3dB loss at 300Hz,

160Hz, 80Hz, and 50Hz with an 18dB cut per octave

slope.

Low Equalization -

This section has a shelving slope with four frequency

selections: 220Hz, 110Hz, 60Hz, and 35Hz. This

equalizer affects the selected frequency and all others

below it.