Owner's manual

Connecting the Preamplifier / Equalizer

Audio Connection

Microphone input connections are made with the

female XLR connector on the rear of the unit. This

connector is wired with pin 2 HOT, pin 3 common

and pin 1 is ground (shield). The 48VDC power is

supplied on pins 2 and 3.

The Instrument (DI) connection is made using the

balanced ¼” TRS jack on the front panel. The

connector is wired with the TIP being positive, The

RING being negative and the SLEEVE being ground

(shield).

Line input connections are made with the male XLR

connector on the rear of the unit. This connector is

wired with pin 2 HOT, pin 3 common and pin 1 is

ground (shield).

Output connection is made using the male XLR

connector on the rear of the unit. This connector is

wired with pin 2 HOT, pin 3 common and pin 1 is

ground (shield).