Specification Sheet

CC Series Ordering Information
Circular Conveyor
Dishwashing Machine
CC
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
ChampionIndustries,Inc.,3765ChampionBlvd.,Winston-Salem,NC27105•336/661-1556•Fax:336/661-1979•www.championindustries.com
SPECIFICATIONS
Capacities
 Racksperhr.(NSFrated) 208to356
 ConveyorSpeed(ft./min.) 5.8to9.9
Motor horsepower
 Drive 1/2or3/4
 Prewash22” 1
Radius 1
PR-36 1
Wash 2
Rinse 2
Water consumption
 Gallonsperhour 112to300
Temperatures °F
Wash 150
 Rinse 160
 Finalrinse 180
Venting*
 Loadendwithprewash(min.cfm) 150
Loadend(min.cfm) 200
Unload end (min. cfm) 400
*Withblower-dryer,increaseroom
ventilation by 600 cfm.
SeeindividualRackConveyorSeriescatalogsheetsfor
machine specifications, performances, utility connections
and dimensions.
A
A
Waste
Pulping
System
Unload
Shelf
Blower Dryer
Blower
Dryer
Champion Rack
Conveyor Dishwashing
Machine
Champion Rack
Conveyor Dishwashing
Machine
Champion Rack
Conveyor Dishwashing
Machine
Trough Mounted
Garbage Disposer
Radial
Prewash
Double
Overshelf
Double
Overshelf
Prewash
22" To 36"
44" To 120"
11' 2" MIN Oval Dimension
38-1/8"
23"
33"
Table
Height
5-3/8"
38-1/8"
13"
6'-5-1/8" Min
Load
Area
Load
Area
Unload
Area
Unload
Area
Triangular
Conguration
Table Detail
Section A-A
Load Area
Oval Conguration
“L” Conguration
Scrap Trough With
Flushing Nozzles
And Built in
Sliding Tray Rests
Scrap Trough With
Flushing Nozzles
Unload
Shelf
Start/Stop
Station
Slanted Overshelf
Drive Section
Unload
Shelf
Flat Box Type Shelf
For Rack Storage
Trough
Mounted
Disposer
Sliding
Tray Rest
Over Trough
Floor Mounted
Garbage Disposer
OR
Scrap Collector
Electrical– See Factory
Include the following information
when ordering the CC Series Machine:
Rack Conveyor Machine Model Number
UsingtheChampionRackConveyorMachinecatalogsheets,
select the machine that meets your specific application.
Type of Prewash
IfanalternateradialprewashorPR-36prewashisneeded,
insteadoftheintegral22”prewash,pleasestateyourchoice.
(PR-36isavailableforstraight-throughoperationonly.)
Direction of Operation
SpecifythedirectionofCCoperation,“clockwise”
or“counter-clockwise.”
Location of Access Doors
State whether the machine doors are on the outside
or the inside of the circle.
Options
Listtheoptionsrequiredtocompleteyourunique
warehandling system!
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.