User's Manual

28
19. Removetheshippingbracesfrom
thesections.
20. Identifythelocationofpiping
betweenthesections.
21. Checktheheightofeachsection
anddeterminewhichsectionisthe
highestduetooorvariations.
22. Setthe"C"sectionandadjusttoits
minimumheight.
23. Levelthe"C"sectionsidetoside
andfronttobackinseveralplaces
withabubblelevel.
24. Theremainingsectionsareleveled
inrelationto"C"section.
Donotadjustthe"C"section
toohigh.
25. Applya1/4"beadofFOOD
GRADEsealanttothefoam
gasketsoneachsection.
26. Movethenextsectioncloseto
the"C".Adjustthefeetofthis
sectiontoalignthe20boltholes
aroundthehood.
27. Slidetheconnectinghosesand
clampsondrainpipesandcross-
owpipes.Donottighten
atthistime.
28. Leveleachsectionsidetoside
andfronttobackmakingsure
thesectionconnectingboltholes
align.
Installation Instructions _______
 Section Assembly:
Section Assembly
APPROVED SEALANT WAS SUPPLIED IN
THE HARDWARE KIT.
DO NOT SUBSTITUTE ANOTHER
TYPE OF SEALANT.