Operating Guide

ENGLISH 100263

Connecting the Battery Cont’d.

ASSEMBLY

Your generator requires some assembly. This unit ships

from our factory without oil. It must be properly serviced

with fuel and oil before operation.

If you have any questions regarding the assembly of your

generator, call our help line at 1-877-338-0999. Please

have your serial number and model number available.

Remove the Generator from the Shipping Carton

1. Set the shipping carton on a solid, ﬂat surface.

2. Remove everything from the carton except the

generator.

3. Using the carrying handles of the unit, carefully

remove the generator from the box. (two people lifting

is recommended)

1. Using a screwdriver, remove the two (2)

maintenance cover screws from the battery

maintenance cover. (A)

2. Once the screws have been removed, the rubber

pull-tab on the cover can be pulled out to help

loosen and dislodge the maintenance cover. (A)

3. Remove the battery maintenance cover. (A)

If the battery cables are not visible once the battery

maintenance cover has been removed, please note

that cables may be tucked up above the battery,

not in plain view.

NOTE

Connecting the Battery

4. Cut zip tie that is binding the battery cables

together.

5. Using a screwdriver, unscrew the battery bolt in the

red, positive (+) battery terminal.

6. Connect the red, positive (+) wire lead to the

positive (+) terminal on the battery using the bolt.

7. Pull rubber sheath over battery cable connection

and battery terminal.

8. Repeat steps 5-7 for the black, negative (-) battery

wire lead and black, negative (-) battery terminal.