Full Product Manual

100402 - 2000W DUAL FUEL INVERTER GENERATOR
MAINTENANCE
25
2. Move the round copper cover plate and remove the battery
cells.
3. Keep the small spring attached to the copper pillar and
place the compressed spring back into the bottom of the
assembly.
"
NOTICE
The compressed spring will have the small end facing
outward.
4. Place new battery cells (2 × LR1130) back into the
assembly with negative (−) pole facing upwards and
positive (+) facing towards the compressed spring. Move
the round copper cover plate to cover and touch the button
cell.
5. Insert the small spring back into the pocket of the upper
cover and press the upper cover into place to complete the
installation.
Adjusting the Governor
! WARNING
Tampering with the factory set governor will void your
warranty.
The air-fuel mixture is not adjustable. Tampering with
the governor can damage your generator and your
electrical devices and will void your warranty. Contact our
Technical Support Team at 1-877-338-0999 for all other
service and/or adjustment needs.
Maintenance Schedule
Follow the service intervals indicated in the following
maintenance schedule.
Service your generator more frequently when operating in
adverse conditions.
Contact our Technical Support Team at 1-877-338-0999
to locate the nearest CPE certified service dealer for your
generator or engine maintenance needs.
EVERY 8 HOURS OR DAILY
# Check oil level
# Clean around air intake and muffler
FIRST 5 HOURS
# Change oil
EVERY 50 HOURS OR EVERY SEASON
# Clean air filter
# Change oil if operating under heavy load or in hot
environments
EVERY 100 HOURS OR EVERY SEASON
# Change oil
# Clean/adjust spark plug
# Check/adjust valve clearance*
# Clean spark arrestor
# Clean fuel tank and filter*
EVERY 250 HOURS
# Clean combustion chamber*
EVERY 3 YEARS
# Replace fuel line*
* To be performed by knowledgeable, experienced owners or CPE certified
service centers.