Full Product Manual

100402 - 2000W DUAL FUEL INVERTER GENERATOR
IMPORTANT SAFETY INSTRUCTIONS
9
Quickstart Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of
these symbols will allow you to more safely operate the product.
Starting the Engine
! DANGER
Move generator outside and far away from windows,
doors and intake ventilation covers.
1. Check oil level.
Recommended oil is 10W-30.
2. Add fuel.
2a. If operating on gasoline, check gasoline level.
When adding gasoline, use a minimum octane rating of
85 and an ethanol content of 10% or less by volume.
2b. If operating on propane, connect propane tank.
Open valve on propane tank.
3. Fuel Selector
3a. Turn EZ Start dial to the right for gasoline operation.
Then turn the fuel vent lever to the “ON” position.
3b. Turn EZ Start dial to the left for LPG operation.
4. Move EZ Start dial to “CHOKE” position.
5. Pull the recoil cord.
6. Move the EZ Start dial to “RUN” position.
7. Plug in desired device.
1663 -L-OP-A
7
1
2A
2B
2A
2B
3B
3A
4
5
6 1
3
10W-30
!
b
c
!
+
+
"
LPN 1663 -L-OP
Rev A
Size 256 x 48 mm
Art work Notes
3mm co rner radi us; 2mm saf e margin; white t o be
prin ted shown in 5 0% process m agenta
Revis ion Chan ges
---
This ar twork belon gs to Champion Power Equipment . The conten ts are confi dential and pr ivileged and sh all not be disc losed to or us ed by or for
outside p arties withou t the explicit conse nt of Champion Power E quipment.
K
CG1 376 152 186
W
Colors
Stopping the Engine
1. Turn off and unplug all connected electrical loads.
2. Fuel Valve
2a. If operating on gasoline, turn the fuel vent lever to the
“OFF” position.
2b. If operating on LPG, close the valve on the LPG tank.
3. Turn the EZ Start dial to the “STOP” position.