Use and Care Manual
8
200946 - 3 IN. (7.6 CM) CHIPPER SHREDDER
IMPORTANT SAFETY INSTRUCTIONS
Top BackSide
Safety and Dataplate Labels
These labels warn you of potential hazards that can cause serious injury. Read them carefully.
If a label comes off or becomes hard to read, contact Technical Support Team for possible replacement.
LABEL DESCRIPTION
A
1966-L-SF-A
DO NOT TOUCH!
Hot surface.
WARNING
¡NO TOCAR!
Superficie caliente.
ADVERTENCIA
AVERTISSEMENT
NE TOUCHEZ PAS!
Surface chaude.
K 485 152 --- ---
ColorsLPN 1966-L-SF
Rev A
Size 59 x 47 mm
Artwork Notes
3mm corner radius; 2mm safe margin;
whit e to be
prin ted show n in 50% process magenta
Revision Changes
---
This ar twork belongs to Champion P ower Equipment . The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
Hot Surface
B
2018-L-OP-A
ESSENCE SANS PLOM SEULEMENT.
Indice d’octane minimal de
87. Maximum 10 % d'éthanol.
La clasificación mínimo de 87
octano. Máximo de etanol de 10%.
GASOLINA SIN PLOMO SOLAMENTE.UNLEADED FUEL ONLY.
Minimum octane rating of 87.
Maximum 10% ethanol.
K 109 --- --- ---
ColorsLPN 2018 -L-OP
Rev B
Size Special
Artwork Notes
3mm corner radius; 2mm safe margin;
to be printed
on
WHITE
substrate.
Revision Changes
-Change octane rating 85 to octane rating 87
(20200409)
This ar twork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
Fuel
C
2065-L-SF-A
WARNING ADVERTENCIA AVERTISSEMENT
• Impact hazard. Avoid hand injury.
• Peligro de impacto. Evite lesiones de la mano.
• Risque d'impact. Éviter les blessures à la main.
• Objects placed into chipper chute will
feed rapidly.
• Los objetos colocados en la tolva de la
astilladora se alimentarán rápidamente
• Objets placés dans la goulotte de la
déchiqueteuse alimenteront rapidement.
• Material maximum diameter
• Diametro máximo de material
• Diamètre du matériau
76,2 mm
3 inch
485 109 152 K ---
ColorsLPN 2065-L-SF
Rev A
Size 73 x 59 mm
Artwork Notes
3mm corner radius; 2mm safe margin;
to be printed
on
white
substrate.
Revision Changes
---
This ar twork belongs to Champion P ower Equipment . The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
Warning Icon -
chipper chute
D
PELIGRO DANGER DANGER
WARNING ADVERTENCIA AVERTISSEMENT
• Material maximum diameter
• Diametro máximo de material
• Diamètre du matériau
1,3 cm
0.5 inch
DO NOT lean over or look into hopper
while machine is running.
DO NOT leave machine unattended
while running.
NO se incline sobre o vea adentro del
conducto mientras la maquina est á
en marcha.
NO deje la maquina sin atender
mientras esté en marcha.
Ne pas se pencher sur ou regarder
dans la goulot te pendant que la
machine fonctionne.
Ne laissez pas la machine sans
surveillance en courant.
2068-L-SF-A
485 152 109 K 2945
ColorsLPN 2068-L-SF
Rev A
Size 136 x 111 mm
Artwork Notes
3mm corner radius; 2mm safe margin;
to be printed
on
white
substrate.
Revision Changes
---
This artw ork belongs to Champio n Power Equipment. The c ontents are confi dential and privileg ed and shall not be disclo sed to or used by or for
outside par ties without the e xplicit consent of C hampion Power Equip ment.
Danger Icon -
shredder hopper outside
A
B
C
D
G
E
F