Installation Guide

Table Of Contents

HOME STANDBY GENERATOR- ALL aXis CONTROLLER

MODELS

SPECIFICATIONS

14-kW (Model 100515) Engine Torque Speciﬁcations

Crankcase Cover Bolts ...........................27 Nm (20 lbf-ft)

Connecting Rod Bolts ............................. 12 Nm (9 lbf-ft)

Rocker Cover Screws .............................. 10 Nm (7 lbf-ft)

Cylinder Head Bolts ........................... 40 Nm (29.5 lbf-ft)

Intake Manifold Screws .......................... 9.5 Nm (7 lbf-ft)

Carburetor to Intake Manifold .................... 9.5 Nm (7 lbf-ft)

Blower Housing ................................... 9 Nm (6.6 lbf-ft)

Flywheel Nut ................................... 196 Nm (145 lbf-ft)

Ignition Coil Bolts ................................. 9.5 Nm (7 lbf-ft)

Starter Motor Bolts .............................24.4 Nm (18 lbf-ft)

Spark Plug ......................................18 Nm (13.3 lbf-ft)

Air Cleaner box to Carb ........................... 9 Nm (6.6 lbf-ft)

Exhaust pipe nuts ..............................18 Nm (13.3 lbf-ft)

22-kW (Model 100304) Engine Torque Speciﬁcations

Crankcase Cover Bolts .......................... 24 Nm (17.8 lbf-ft)

Connecting Rod Bolts .............................16 Nm (12 lbf-ft)

Rocker Cover Screws ............................. 15 Nm (11 lbf-ft)

Cylinder Head Bolts ............................ 40 Nm (29.5 lbf-ft)

Intake Manifold Screws ......................... 24 Nm (17.8 lbf-ft)

Carburetor to Intake Manifold ................... 10 Nm (7.4 lbf-ft)

Blower Housing ....................................10 Nm (7.4lbf-ft)

Flywheel Nut ................................... 28 Nm (20.7 lbf-ft)

Ignition Coil Bolts ................................. 10 Nm (7.4 lbf-ft)

Starter Motor Bolts .............................. 24 Nm (17.8 lbf-ft)

Spark Plug .......................................18 Nm (13.3 lbf-ft)

Air Cleaner box to Carb .......................... 10 Nm (7.4 lbf-ft)

Exhaust pipe nuts .............................. 22 Nm (16.3 lbf-ft)

Master Mixing Assembly Jets (Carburetor System) - Both models

Idle/low-speed Jet .............................. 1.9 Nm (1.4 lbf-ft)

Main Jet ......................................... 3.9 Nm (2.9 lbf-ft)

Fuel Inlet Chamber Screws .................... 2.9 Nm (2.1 lbf-ft)