Full Product Manual

201161 - 12,000W TRI-FUEL PORTABLE GENERATOR
CONTROLS AND FEATURES
13
Control Panel
1. Ignition Switch – Used for electric starting of the generator.
2. Choke – Used to start a cold engine.
3. Intelligauge with Power Meter – See Intelligauge section.
4. Circuit Breakers (Flip Reset) – Protects the generator
against electrical overloads.
5. Circuit Breakers (Push Reset) – Protects the generator
against electrical overloads.
6. Fuel Select Dial – Used to select and turn on gasoline,
propane (LPG), or natural gas (NG) fuel source.
RECEPTACLES
A
D
120/240V AC, 50A (NEMA 14-50R)
May be used to supply electrical power for
operation of 120/240 Volt AC, 50 Amp, single
phase, 60 Hz electrical loads.
B
Y
120/240V AC, 30A Locking (NEMA L14-30R)
May be used to supply electrical power for
operation of 120/240 Volt AC, 30 Amp, single
phase, 60 Hz electrical loads.
C
W
120V AC, 30A Locking (NEMA L5-30R)
May be used to supply electrical power for
operation of 120 Volt AC, 30 Amp, single phase,
60 Hz electrical loads.
D
C
(4×) 120V AC, 20A GFCI (NEMA 5-20R)
May be used to supply electrical power for
operation of 120 Volt AC, 20 Amp, single phase,
60 Hz electrical loads.
6
1 2 3
A B C
D
5
4
Fuel Select Dial
1. Gasoline ON
2. Gasoline OFF
3. Engine OFF
4. Propane (LPG) ON
5. Natural Gas (NG) ON
1
2
4
5
3