OWNER’S MANUAL 4500 lb. Winch aTV/UTV Winch Kit MODEL NUMBER 40252 saVe These InsTrUCTIOns Important Safety Instructions are included in this manual. MADE IN CHINA REV 40252-20170216 12039 Smith Ave. Santa Fe Springs CA 90670 USA / 1-877-338-0999 www.championpowerequipment.
Have questions or need assistance? Do not return this product to the store! WE ARE HERE TO HELP! Visit our website: www.championpowerequipment.
40252 4500 lb. Winch ATV/UTV Winch Kit Table of Contents Introduction. . . . . . Introduction. . . . Manual Conventions . Safety Rules . . . . . . . . . Controls and Features . Winch. . . . . . . . Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembling the Winch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting the Remote Control. . .
ENGLISH 40252 Introduction Introduction Congratulations on your purchase of a Champion Power Equipment product. Champion Power Equipment and Champion Engine Technology designs, builds, and supports all of our products to strict specifications and guidelines. With proper product knowledge, safe use, and regular maintenance, this product should bring years of satisfying service.
40252 ENGLISH Manual Conventions This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. Follow all safety messages to avoid or reduce the risk of serious injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
ENGLISH 40252 Safety Rules WARNING Read this manual thoroughly before operating your winch. Failure to follow instructions could result in serious injury or death. WARNING Do not exceed the rated capacity. DANGER Do not use this winch for lifting or moving people or animals. DANGER Keep yourself and others a safe distance to the side of the cable when under tension. DANGER Never step over a cable or near a cable under load. WARNING The wire rope may break before the motor stalls.
40252 ENGLISH WARNING When re-spooling the cable, ensure that the cable spools in the under-wind position with the cable entering the drum from the bottom, not the top. To re-spool correctly, and while wearing gloves, keep a slight load on the cable while pushing the remote button to draw in the cable. Walk toward the winch not allowing the cable to slide through your hands. Do not let your hands get within 12” of the winch while re-spooling.
ENGLISH 40252 Controls and Features Read this owner’s manual before operating your winch. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Winch 3 4 5 2 6 1 7 8 11 9 10 (1) Remote Control – Rocker switch with handlebar mount for powering the rope in or out of your winch drum. (2) Motor – 1.6 HP 12V DC motor provides power to the planetary gear mechanism.
40252 ENGLISH Assembling the Winch This CPE 4500 lb. (2041 kg) winch is designed with a bolt pattern that is standard in this class of winch. Many winch mounting kits are available that utilize this bolt pattern for the most popular UTVs and ATVs. If you cannot find a kit locally, contact CPE and we will provide you with the name of a dealer. CAUTION Mounting bolts must be SAE grade 5 or better and torque to 34 ft. lbs. 1.
ENGLISH 40252 Assembly Winch Wiring CAUTION Never route electrical cables across any sharp edges, through or near moving parts, or near parts that become hot. 1. Mount the winch to your vehicle. 2. FOR WINCH TO FULLY FUNCTION CONNECT ALL LEADS CORRECTLY. 3. Connect the battery leads: Connect the red (+) lead to the positive (+) terminal of the vehicle’s 12 volt battery. Connect the black (–) lead to the negative (–) terminal of the vehicle’s 12 volt battery. (see wiring diagram) 4.
40252 ENGLISH Assembly Wiring Diagram Negative (–) Black Red Positive (+) Black Remote Control Negative (–) Positive (+) Red 8
ENGLISH 40252 Operation 9 General Tips for Safe Operation Self Recovery Your 40252 winch is rated at a 4500 lb. capacity in first layer (max) when spooling the first rope layer on the drum. Overloads can damage the winch, motor and/or wire rope. For loads over 2250 lb. (1021 kg) we recommend the use of the pulley block/snatch block to double the wire rope line.
40252 ENGLISH Operation Winching Techniques A-Z Winching Techniques A-Z Cont’d. (a) Take time to assess your situation and plan your pull. (b) Put on gloves to protect your hands. (c) Disengage the clutch to allow free- spooling and also save battery power. (d) Attach the hook strap to the clevis hook. (e) Pull out the wire rope to your desired anchor point using the hook strap. (f) Secure the clevis hook to the anchor point: Sling, chain or snatch block. Do not attach the hook back onto the wire rope.
ENGLISH 40252 Maintenance The owner/operator is responsible for all periodic maintenance. WARNING Never operate a damaged or defective winch. WARNING Improper maintenance will void your warranty. Complete all scheduled maintenance in a timely manner. Correct any issue before operating the winch.
40252 ENGLISH Specifications Performance Specifications . . . . . . . Gear Reduction Ratio . Motor . . . . . . . . . . Drum Size. . . . . . . . Cable . . . . . . . . . . Gross Weight. . . . . . Net Weight . . . . . . . Height. . . . . . . . . . Width. . . . . . . . . . Length . . . . . . . . . Bolt Pattern. . . . . . –– Rated Pull –– –– –– –– –– –– –– –– –– –– . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 40252 Specifications Parts Diagram 15 14 23 51 40 21 1 22 37 38 52 34 39 2 21 3 57 56 55 54 53 20 4 36 5 19 6 18 38 18 37 17 7 8 17 24 41 9 42 10 25 43 44 11 26 45 12 46 13 32 35 50 27 16 33 49 28 14 48 29 31 47 13 30 14 15
40252 ENGLISH # 1 Parts List Part Number Description 450100-BF Motor Assembly - Black Flat Qty 1 # Part Number Description 31 450023 Bolt M10 x 20, Square Neck Qty 2 2 450001 Coupling, I 1 32 250036 Lock Nut M10 2 3 450002 Spring, Coupling 1 33 450024-BF Roller Fairlead - Black Flat 1 4 450003 Coupling, II 1 34 451500 Switch Assembly 1 5 400200-BF Drum Assembly - Black Flat 1 35 300022 Hand Saver Bar 1 36 450025 Tie Bar Ø8 1 37 450026 Hexagon Socket Head S
ENGLISH 40252 Troubleshooting Problem Cause Solution Motor does not turn on Switch Assembly not connected properly Insert Switch Assembly all the way into the connector. Loose battery cable connections Tighten nuts on all cable connections. Contactor malfunctioning Tap contactor to loosen contacts. Apply 12 volts to coil terminals directly. A clicking indicates proper activation. Defective Switch Assembly Replace Switch Assembly.
WARRANTY WARRANTY CHAMPION POWER EQUIPMENT 2 YEAR LIMITED WARRANTY Warranty Qualifications Champion Power Equipment (CPE) will register this warranty upon receipt of your Warranty Registration Card and a copy of your sales receipt from one of CPE’s retail locations as proof of purchase. Please submit your warranty registration and your proof of purchase within ten (10) days of the date of purchase.