Replacement Part List

Specifications
10 Rev 14501-20090603
Specifications
Performance Specifications
Rated Pull 4,500 lb (2041 kg)
Gear Reduction Ratio 166:1
Motor Permanent Magnet
1.6 HP/(DC 12V)
Duty Cycle Intermittent
Drum Size 2” (D) x 4.92” (L)
50.8 mm (D) x 125 mm (L)
Cable 7/32” (D) x 52’ (L)
5.4 mm (D) x 16 m (L)
Weight 34.9 lb. (15.8 kg)
Height 5.0 inches (127 mm)
Width 4.55 inches (115.5 mm)
Length 16.3 inches (415 mm)
Bolt Pattern 6.6” x 3” inches (168 mm x 76
mm)
Line speed and Motor Current (First layer)
Line pull Max
lb 0 1000 2000 3000 4500
kg 0 454 907 1361 2041
Line speed
(12VDC)
FPM 12.8 9.8 8.5 6.9 3.9
MPM 3.9 3.0 2.6 2.1 1.2
Max Current amps 28 80 130 180 280
Running Time* Minutes 1 1 1 1 1
Cooling Time** Minutes 5 5 5 5 5
*If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down for 5 minutes.
Do not pull for more than one minute at or near the rated load.
**Electric winches are designed and made for intermittent use and should not be used in constant duty applications.
Line pull and cable capacity
Layers of cable on drum 1 2 3 4
Max pulling capacity
per layer
lb 4500 3841 3310 2907
kg 2041 1742 1501 1319
Cable capacity ft 13.4 28.8 45.8 52
per layer m 4.1 8.8 14 16
* Use double line and snatch block for pulling loads over 2,000lb / 907 kg