Catalog

Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone [phone] • toll free 800-659-4491 • fax [phone]
www.championpump.com
CP8NC36036,
CP8NC36046,
CP8NC48046
1150RPM, 60Hz
DISCHARGE 8” 125 lb., Flange Horizontal
LIQUID TEMPERATURE 104°F Continuous
MOTOR HOUSING Cast Iron, Class 30
VOLUTE Cast Iron, Class 30 with Bronze
wear ring
IMPELLER
3 vane, enclosed type with
pump out vanes on back side,
Dynamically balanced, ISO
G6.3, Cast Iron, Class 30
SOLIDS HANDLING 3” spherical
SHAFT Stainless steel
SEAL PLATE Cast Iron, Class 30
PAINT Air dry enamel
SQUARE RINGS Buna-N
HARDWARE Stainless steel
SEAL
Double mechanical, Oil Filled
pressure equalized reservoir,
inner seal -
Carbon/Ceramic/Buna-N
outer seal -
Silicon Carbide/Buna-N
UPPER BEARING Single row, ball, oil lubricated
LOWER BEARING Double row, ball, oil lubricated
POWER CORD
25 Ft. Cord. Epoxy sealed
housing with secondary
Pressure grommet for sealing
and strain relief.
MOTOR Class F Insulation, Oil Filled
THREE PHASE
230/460 Volt. Dual Voltage.
Requires overload protection
to be included in control panel
MOISTURE SENSOR
Normally open (N/O),
requires relay in control panel
TEMPERATURE
SENSOR
Normally closed (N/C),
requires relay in control panel
Description
Submersible non-clog sewage pump designed for typical
raw sewage applications.
CP8NC
36, 48HP
Submersible Non-Clog