OWNER’S MANUAL & OPERATING INSTRUCTIONS 4500 lb. WINCH MODEL NUMBER 14051 SAVE THESE INSTRUCTIONS Important Safety Instructions are included in this manual. MADE IN CHINA REV 14051-20160719 12039 Smith Ave. Santa Fe Springs CA 90670 USA / 1-877-338-0999 www.championpowerequipment.
Have questions or need assistance? Do not return this product to the store! WE ARE HERE TO HELP! Visit our website: www.championpowerequipment.com for more info: • Product Info & Updates • Frequently Asked Questions • Tech Bulletins • Product Registration – or – Call our Customer Care Team Toll-Free at: 1-877-338-0999 *We are always working to improve our products. Therefore, the enclosed product may differ slightly from the image on the cover.
14051 4500 lb. WINCH Table of Contents Introduction. . . . . . Introduction. . . . This Booklet . . . Accessories. . . . Manual Conventions . Safety Rules . . . . . . . . . . . Controls and Features . Winch. . . . . . . . Assembly . . . . . . . . . . . . . . . . . Mounting the Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ENGLISH 14051 Introduction Introduction Accessories Congratulations on your purchase of a Champion Power Equipment winch. CPE designs and builds winches to strict specifications. With proper use and maintenance, this winch will bring years of satisfying service. Champion Power Equipment manufactures and sells accessories designed to help you get the most from your purchase. To find out more about our covers, tree savers, hooks, fairleads, etc., please visit our website at: www.championpowerequipment.
14051 ENGLISH Manual Conventions This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. Follow all safety messages to avoid or reduce the risk of serious injury or death. DANGER DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
ENGLISH 14051 Safety Rules WARNING Read this manual thoroughly before operating your winch. Failure to follow instructions could result in serious injury or death. WARNING Do not exceed the rated capacity. DANGER Do not use this winch for lifting or moving people or animals. DANGER Keep yourself and others a safe distance to the side of the cable when under tension. DANGER Never step over a cable or near a cable under load. WARNING The wire rope may break before the motor stalls.
14051 ENGLISH WARNING When re-spooling the cable, ensure that the cable spools in the under-wind position with the cable entering the drum from the bottom, not the top. To re-spool correctly, and while wearing gloves, keep a slight load on the cable while pushing the remote button to draw in the cable. Walk toward the winch not allowing the cable to slide through your hands. Do not let your hands get within 30 cm (12 in.) of the winch while re-spooling.
ENGLISH 14051 Controls and Features Read this owner’s manual before operating your winch. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Winch 2 3 4 5 1 10 11 6 9 12 13 7 8 (1) Motor - 1.6 HP/1.2 kW 12V DC motor provides power to the planetary gear mechanism.
(7) Rocker Switch - Rocker switch with handlebar mount for powering the rope in or out of your winch drum.
14051 ENGLISH Mounting the Winch This CPE 4,500 lb. winch is designed with a bolt pattern that is standard in this class of winch. Many winch mounting kits are available that utilize this bolt pattern for the most popular trucks, SUV’s and ATV’s. If you cannot find a kit locally, contact CPE and we will provide you with the name of a dealer. CAUTION Mounting bolts must be SAE grade 5 or better and torque to 34 ft. lbs. 1.
ENGLISH 14051 Assembly Wiring the Winch CAUTION NEVER route electrical cables across any sharp edges, through and/or near moving parts, or near parts that may become hot. CAUTION Battery cables should NOT be drawn taut. Leave some slack for cable movement. NOTE You may need to use a test light to locate a suitable wire. The wire should only have power when the key is in the ON position.
14051 ENGLISH Assembly Wiring Diagram Negative (–) Blue Yellow Positive (+) Black Negative (–) Positive (+) To Switch and Remote Wiring Red Switch Wiring Diagram Green Black Ignition Wire Red 8
ENGLISH 14051 Operation General Tips for Safe Operation Your 14051 winch is rated at a 4,500 lb. (2041 kg) capacity in first layer (max) when spooling the first rope layer on the drum. Overloads can damage the winch, motor and/or synthetic rope. For loads over 2,250 lb. (1021 kg) we recommend the use of the pulley block/snatch block to double the synthetic rope line.
14051 ENGLISH Operation Synthetic Rope Abrasion Sleeve Winching Techniques A-Z Cont’d. The winch should be set up to avoid any rough surface from contacting the rope. If that is not possible, the abrasion sleeve can be used to help protect the rope. (A) (n) Clear the area. Make sure all spectators stand clear and that no one is directly in front or behind the vehicle or anchor point. (o) Begin winching. Be sure that the synthetic rope is winding evenly and tightly around the drum.
ENGLISH 14051 Maintenance The owner/operator is responsible for all periodic maintenance. WARNING Never operate a damaged or defective winch. WARNING Improper maintenance will void your warranty. Complete all scheduled maintenance in a timely manner. Correct any issue before operating the winch. NOTE For service or parts assistance, contact our help line at 1-877-338-0999 Lubrication All moving parts within the Electric Winch having been Lubricated using high temperature lithium grease at the factory.
14051 ENGLISH Specifications Performance Specifications . . . . . . . Gear Reduction Ratio . Motor . . . . . . . . . . Duty Cycle . . . . . . . Drum Size. . . . . . . . Synthetic Rope. . . . . Gross Weight. . . . . . Net Weight . . . . . . . Height. . . . . . . . . . Width. . . . . . . . . . Length . . . . . . . . . Bolt Pattern. . . . . . –– Rated Pull –– –– –– –– –– –– –– –– –– –– –– . . . . . . . . . . . . . . . . .
Specifications Parts Diagram 13 ENGLISH 14051
14051 ENGLISH # Parts List Part Number Description 1 456100A-BF Motor Assembly Black Flat (Horizontal) 1 2 450001 Coupling, I 3 450002 Spring, Coupling 4 450003A Coupling, II 1 5 410001 Spring 1 6 410200-BF Drum Assembly Black Flat 1 7 410002 Tie Bar 3 410003-BF Gear Housing Cover -Black Flat Qty # Part Number Description Qty 34 250088 Aluminum Hawse 124mm 1 1 35 250011 Circlip ø15 1 1 36 300020 Washer ø8, Locking 4 37 300019 Washer ø8, Flat 4 38 450021 Bo
ENGLISH 14051 Troubleshooting Problem Cause Solution Motor does not turn on Loose battery cable connections Tighten nuts on all cable connections Defective Switch Assembly Replace Switch Assembly Defective motor Check for voltage at armature port with Switch pressed. If voltage is present, Replace motor Water has entered motor Allow to drain and dry.
WARRANTY WARRANTY CHAMPION POWER EQUIPMENT 2 YEAR LIMITED WARRANTY Warranty Qualifications Champion Power Equipment (CPE) will register this warranty upon receipt of your Warranty Registration Card and a copy of your sales receipt from one of CPE’s retail locations as proof of purchase. Please submit your warranty registration and your proof of purchase within ten (10) days of the date of purchase.
