User Manual

12
14051 ENGLISH
SPECIFICATIONS
Performance Specifications
– Rated Pull ...................................... 4,500 lb (2041 kg)
– Gear Reduction Ratio ....................................... 180:1
– Motor ........................... Permanent Magnet 1.6 HP/1.2 kW (12V DC)
– Duty Cycle .......................................... Intermittent
– Drum Size ......................1.7 in. (D) x 3.2 in. (L) [44 mm(D) x 80 mm(L)]
– Synthetic Rope ................... 15/64 in. (D) x 38 ft. (L) [6 mm(D) x 11.6 m(L)]
– Gross Weight ...................................... 24.3 lb. (11 kg)
– Net Weight ....................................... 21.6 lb. (9.8 kg)
– Height ..........................................4.9 in. (12.4 cm)
– Width .......................................... 4.5 in. (11.5 cm)
– Length ........................................ 13.5 in. (34.4 cm)
– Bolt Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 in. x 3 in. (12.4 cm x 7.6 cm)
Line Speed and Motor Current (First Layer)
Line Pull
LB 0 1000 2000 3000 4500
KG 0 454 907 1361 2041
Line Speed (12V DC)
FPM 12.8 9.8 8.5 6.9 3.3
MPM 3.9 3.5 2.7 2.0 1.4
Motor Current (12V DC) A 28 80 140 180 280
Running Time* Minutes 1 1 1 1 1
Cooling Time** Minutes 5 5 5 5 5
Line Pull and Cable Capacity Per Layer
Line of Cable 1 2 3 4
Rated Line Pull
LB 4500 3629 3041 2616
KG 2041 1648 1380 118 8
Cable Capacity
FT 6.7 15.0 24.9 38.0
M 2.0 4.8 7. 6 11.6
*If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down
for 5 minutes. Do not pull for more than one minute at or near the rated load.
**Electric winches are designed and made for intermittent use and should not be used in constant
duty applications.
It is recommended to use double line and snatch block for pulling loads over
2,250 lb. (1021 kg).