Owner`s manual

12
Champion Spas®
OWNER'S MANUAL
INITIAL OPERATING INSTRUCTIONS
Start-Up and Refill Procedures
Your Champion Spas® model has been tested at the manufacturing plant to ensure that all of the
spa functions operate. During the test procedure, a small amount of water may have remained in
the spa plumbing. Through the shipping process water may have spotted the spa shell. You may
need to wipe down the shell with a soft cloth. Please read and follow the start-up instructions to
ensure a successful start-up or refill.
• Inspect and clean spa shell of any debris
• Do not turn power on to spa unless filled with water to appropriate level (See Page
13). The spa pack must never be operated without water in the spa; serious damage to
the heater and/or pump(s) may result.
• Do not fill spa with water before checking the items below (below items may become
loose in transit):
• Do not fill spa with hot water. This may cause a false error code to the temperature sensor.
A
A
C
A. Hand tighten unions at the pumps
B. Tighten drain valve
Note: The Drain Valve is left open for
shipping and must be closed before filling spa.
C . Tighten unions on heater
B
!
!
C