Owner`s manual

Champion Spas®

OWNER'S MANUAL

If a Temperature button is pressed and held when the temperature is flashing, the temperature

will continue to change.

When the spa is first powered up the water temperature will not be displayed until the pump has

been running for at least two minutes. The Default Water Temp from the factory will be 80*F in

HIGH RANGE.

The temperature shown on the display without pressing the Warm or Cool button reflects the

temperature of the water at that particular moment.

HOLD Mode

“Hold Mode” is used to disable the pumps during service functions like cleaning or replacing the

filter. Press TEMP to desired hold temperature, Press LIGHT repeatedly to HOLD, then Press

TEMP to count down. The clock will count down from 60 minutes.

LOCK and UNLOCK Mode

Locking the panel prevents the spa from being used; it also prevents unwanted temperature

adjustments. All automatic functions are still active. Locking the temperature allows Jets and

other feature to be used, but the Set Temperature and other programmed settings cannot be

adjusted. Temperature Lock allows access to a reduced selection of menu items, which include

Set Temperature, FLIP, LOCK, UTIL, INFO and FALT LOG.

To engage LOCK MODE, Press TEMP, Press LIGHT repeatedly until LOCK appears, then

Press TEMP. To continue, Press LIGHT to toggle TEMP or PANL, Press TEMP to toggle ON

or OFF, then Press LIGHT to exit menu.

Note: To Unlock (UNLK) the above features, Press TEMP, then LOCK appears on

display, Press and hold TEMP while pressing LIGHT twice. UNLK screen appears, and

then will exit to main screen in approximately 3 seconds.

Setting 24 Hour Clock

This action changes a 12 hour clock to a 24 hour clock.

Press TEMP to initiate a flashing display. When the temperature flashes, Press LIGHT repeatedly

until PREF appears. Press TEMP at PREF. Press LIGHT at the F/C menu. Press TEMP to

toggle between 24 and 12 hour. Press LIGHT to:

1) enter choice,

2) again to exit PREF menu,

3) again to exit UTL menu and return to main menu.

Temperature F/C Display

Provides an option to choose between Fahrenheit and Celsius

To choose between Fahrenheit and Celsius, toggle between F and C in PREF menu. Press

TEMP, then Press LIGHT repeatedly until PREF appears, Press TEMP to toggle F/C choice,

Press LIGHT twice to exit to main menu.

FLIP Button

Pressing the panel button marked FLIP will invert the display on the panel, allowing you to read

the display from inside or outside of the spa.