Owner`s manual
22
Champion Spas®
OWNER'S MANUAL
Place the vacuum hose down the filter cartridge openings and vacuum any water from 11.
filter compartment.
With a Shop Vac, go to every jet in the spa (including suction fittings) and place vac hose 12.
over the face of every jet and vacuum out any water left in the lines. Do the same to the
filter housing and filter cartridge openings. Continue to do the same to the heater and the
plumbing going into the pump(s). Remove every jet valve assembly and continue to vacuum
out any water in the plumbing lines.
Wipe down spa shell with a soft clean cloth.13.
Place spa cover over spa and lock into place.14.
To restart the spa, connect all hoses and close all unions. Once all the hoses, jet valve 15.
assemblies, and pump unions are reattached, follow the normal fill-up procedures. It may be
necessary to flush the spa depending on the amount of antifreeze used.
Note: It may be necessary to lubricate o-rings and gaskets for a positive seal. Use only
Champion Spas® approved lubricants, contact your local dealer for more information.
WARNING:
Iftheseinstructionsarenotfollowed,damageduetofreezingwaterintheplumbinglinesmayoccur
andisnotcoveredundermanufacturer'swarranty.