User Manual

Using your garment steamer

Before rst use

1. Remove any sticker or protective cover from the steam head.

2. Unwind and straighten the cord before use.

3. Whenoperatingthegarmentsteamerforthersttime,allowittosteamforafewminutes. 

This will remove any impurities and odors that might have been left by the manufacturing

process.

4. Whenoperatingthegarmentsteamerforthersttime,youmaywanttotrythesteameron

an old piece of fabric before steamer on an old piece of fabric before steaming your garment.

Warning: To avoid an electrical circuit overload, it is recommended that no other appliances are

plugged into the same circuit as your garment steamer when it is in use.

Note: When unpacking the garment steamer, check to see you have received all the items

listed in the parts list, before discarding the packaging.

Assembling/operating your garment steamer

1. Pressthewatertankreleasebutton,pulloutthewatertank,openthewaterinletcoverandll

tapwaterintothewatertankuntilitreachestheMAXIMUMlevel.Alwaysensurethewatertank

isatleastathirdfull.DonotexceedtheMAXIMUMlevelwhenllingthewatertank.Putback

the water tank.

2. Hold the appliance with your hand positioned safely at the neck of the garment steamer. In an

upright position, use your other hand to attach the fabric brush onto the steam head. The fabric

brush can be attached either way and will lock into position with an audible ”click”.

3. Connect the appliance to a power outlet and switch on. Press the power button, the power

indicatorlightwillbeashing,appliancebeginsheating.Whenthelightsstopashingintolong

bright,thatpreheatnished,youcanstartusing.SwitchOFFthesteamerbypressthepower

button. When the appliance is power off the indicator light will extinguish.

4. OncethewaterislledtotheMAXIMUMlevelandtheapplianceisconnectedtothepowerout-

let, allow the garment steamer to preheat for before use.

5. This garment steamer has an intelligent automatic power off function. When the user stops ope-

rating this product over a certain time, the product of internal control circuit will be cut off power

supply, prevent the happening of the accident, and can save electricity.

How to steam your garment

1. The garment steamer is easy to use and is perfect for removing wrinkles/creases from garments

and curtains as well as refreshing furnishing fabrics. It can be used on most fabrics as long as

the fabric is hanging or where the garment steamer can be easily used in an upright position

moving over the fabric in an up and down motion.

NOTE: The garment steamer is designed to be used in an upright position on hanging

garments. Refrain from using the steamer in or on garments in a horizontal position.

1. Check that there is ventilation behind the fabric otherwise moisture may build up causing

mildew.

2. Check garment pockets are empty and turn-ups such as cuffs and hems are down.

3. Hang the garment from a hanger and stretch the fabric slightly with one hand checking that

there is nothing behind the fabric that can be damaged by the steam.