Installation/Operation with Service Replacement Parts Beginning with Serial No. J2089 and above Eseries High Temperature Upright Conveyor Dishwasher EUCCW-8 / EUCC-8 Models: EUCCW 29" wide conveyor with a 4', 6',or 8' center section EUCC 24" wide conveyor with a 4', 6',or 8' center section EUCCW-6 / EUCC-6 Dishwasher serial no. EUCCW-4 / EUCC-4 Issue Date: 8.25.10 Manual P/N 114254 rev. G www.championindustries.com P.O.
For future reference, record your dishwasher information in the box below. Model Number__________________________ Serial Number_______________________ Voltage________________Hertz_____________ Phase__________________ Champion Service Agent __________________________________ Tel:______________________ Champion Parts Distributor _________________________________ Tel:______________________ For all models: The data plate mounts to one side of the top-mounted control cabinet.
CHAMPION-MOYER DIEBEL P0 BOX 301 JORDAN STATION ON LOR 1S0 ATTENTION: Complete the back of the WARRANTY CARD, then cut along the dashed lines and mail immediately to make sure that your machine warranty is validated. USE CANADIAN WARRANTY CARD IN CANADA AND USA WARRANTY CARD IN THE UNITED STATES.
Model WARRANTY REGISTRATION CARD Serial # Date of Installation: Company Name: Address: Telephone #: ( ) --- (Street) State or Province Zip Code Contact: Installation Company: Address: Telephone #: Contact: This Card Must Be Returned to Validate Machine Warranty: IMPORTANT Model IMPORTANT WARRANTY REGISTRATION CARD Serial # Date of Installation: Company Name: Address: Telephone #: ( ) --- (Street) State or Province Zip Code Contact: Installation Company: Address: Telephone #: Contact: Th
Revision History Revision History Revision Date Revised Pages Serial Number Effectivity Revision Description 3.16.07 All J2089 Issue of First Edition 3.22.07 All J2089 Revised Parts Format 7.27.07 All J2089 Added 575VAC Parts 11.18.08 All J08102541 Added Digital Display 10.5.09 All ------ Changed P/N's for Clutch 12.6.09 63-71 Added Standpipe J09062644 Gasket 1.6.10 181,183 J09062644 Corrected P/N's 45, 46, 47 2.10.
Dear Owner: Thank-you for choosing our dishwasher. We appreciate your business. This manual covers two models: EUCCW EUCC Electric high temperature flight-type conveyor dishwasher with built-in electric booster in 40° F/22° C rise or an optional 70° F/39° C rise booster. EUCCW EUCC Steam high temperature flight-type conveyor dishwasher with built-in steam booster in 40° F/22° C rise or an optional 70° F/39° C rise booster.
Table of Contents Table of Contents E series Upright Conveyor Dishwashers Revision History____________________________________________________________________ i Limited Warranty__________________________________________________________________ iv Operating Instructions____________________________________________ 1 Construction How to Operate your Dishwasher Cleaning and Maintenance Troubleshooting Installation ______________________________________________________ 21 The plumbing and e
Limited Warranty LIMITED WARRANTY Champion Industries Inc. (herein referred to as Champion), 3765 Champion Blvd, Winston-Salem, North Carolina 27105, and P.O. Box 301, 2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts, as set out below.
How to operate your dishwasher __________ Operating Instructions How to operate your dishwasher IMPORTANT Please read the steps below before you operate your dishwasher. 1. Make sure the dishwasher was properly installed and tested prior to operation. 2. Read the operating instructions completely before you operate your dishwasher for the first time. 3. Keep these instructions available for quick reference. 4. Contact your supervisor immediately if you have questions about the dishwasher. 5.
Dishwasher Construction Operating Instructions_ ________ Dishwasher Construction 1. The Upright Conveyor dishwasher, (also called the flight-type conveyor), is assembled as a single unit from sections or modules. 2. This basic design is then customized to the customer's specifications. 3. The information presented blow explains the basic construction of the upright conveyor dishwasher. It does not cover custom-built innovations. 4. Study the diagrams on the next page, then continue reading below.
How to operate your dishwasher __________ Operating Instructions All Models 1. The diagrams below show an example of one type of upright conveyor dishwasher. Your dishwasher may be different; however, the basic design is similar. 2. Study the diagrams and see if you can match features on your dishwasher. "C" Conveyor Travel Direction The conveyor direction of travel is referenced from the load section to the unload section.
Operation: Step by Step Operating Instructions_ ________ Operation: Step by Step Follow the illustrations and comments for the remainder of the Operating Instructions to learn the proper way to operate your dishwasher. DO NOT flip the dishwasher power switch "ON" until you check the items below. 1. Check that the following utilities are connected: to the dishwasher and ready for use: Electrical service Hot water supply Drain Ventilation 2.
Operation: Step by Step __________ Operating Instructions 1. Close all drains. 2. Make sure floats, overflows, drain screens, and pump screens are clean and in place. 3. Always slide the pump screens up and lift out. 4. Check the bottom to make absolutely sure they are clean.
Operation: Step by Step Operating Instructions_ ________ 6 Operation: Step by Step 1. Place the curtains in the dishwasher making sure the short flaps face the load end of the machine. 2. To install the curtains: Locate the curtain hooks in each section. 3. Place the curtain rod in the rear hook, then lift the opposite end of the curtain rod and place it in the front hook. 4. Place the 19" long curtains at each end of the dishwasher. 5. Place the 14" center curtains in each section. 6.
Operation: Step by Step __________ Operating Instructions 7. Check the upper and lower wash arm manifold o-rings to make sure they are in place and in good condition. 8. Install the upper wash arm assemblies. 9. Install the lower wash arm assemblies. 10. Make sure all wash arm assemblies are locked in place. 11. The auxiliary rinse section is equipped with an upper and lower rinse arm.
Operation: Step by Step LOCKING SLOT Operating Instructions_ ________ Operation: Step by Step TO REMOVE UPPER SPRAY ARM: TO INSTALL UPPER SPRAY ARM: LOCK RELEASES LOCKING SLOT LOCKING SLOT TAB PREVENTS SPRAY ARM FROM DROPPING LOCKING SLOT LOCKING SLOT TAB PREVENTS SPRAY ARM FROM DROPPING TO REMOVE UPPER SPRAY ARM: LOCK RELEASES LOCKING SLOT TAB PREVENTS SPRAY ARM FROM DROPPING LOCKING SLOT TAB PREVENTS SPRAY ARM FROM DROPPING LOCK RELEASE 8
Operation: Step by Step __________ Operating Instructions 12. There are 2 removable auiliary rinse spray pipes in the auxiliary rinse section. 13. Make sure the upper and lower auxiliary rinse spray pipe gaskets are in place. 14. Position the spray pipe so the rinse nozzle points toward 10 o'clock. 15. Push the rinse pipe forward. 16. Turn the auxiliary rinse pipe 1/4 turn clockwise to lock it in place.
Operation: Step by Step Operating Instructions_ ________ 17. Operation: Step by Step Install the scrap screens. 18. Install the scrap baskets if applicable. 19. 10 Make sure the screens are fully seated to the rear of the dishwasher and interlocked into the scrap basket.
Operation: Step by Step __________ Operating Instructions Operation: Step by Step 20. Close all doors. 21. Lift the door up slightly, then push the door catch back toward the inside of the dishwasher. 22. Slowly lower the door. The door catch remains disengage 23. There are 2 half-size Econo-rinse doors. The operator lifts the upper door which hooks in place. Next, he lifts the lower door which hooks in front of the upper door.
Operation: Step by Step Operating Instructions_ ________ Operation: Step by Step 24. Flip the dishwasher power switch up. 25. The dishwasher automatically fills with water. 26. The tank heat comes on as soon as the tanks are full. 27. Wait for 15-20 minutes to allow the wash and rinse tanks to reach operating temperature. R-L shown The prewash tank is not heated so its temperature may be lower than the wash tank. This is okay.
Operation: Step by Step __________ Operating Instructions 28. Push the Green start button to start the conveyor belt. Operation: Step by Step NOTE: Pushing the green start button: 1. Starts the conveyor belt. 29. Push the Red Stop button to stop the conveyor belt. The wash pumps stop. Tank heaters continue to operate. 30. Push the GREEN START BUTTON to re-start the conveyor belt.
Operation: Step by Step Operating Instructions_ ________ 31. Operation: Step by Step Your dishwasher is equipped with start-stop stations. The load station is standard equipment; the unload station is an option. These stations work exactly as the control cabinet start and stop buttons. Start-stop stations make it possible for the person loading the wares on the conveyor belt to start and stop the dishwasher as needed.
Operation: Step by Step __________ Operating Instructions 34. Operation: Step by Step An important safety feature designed to stop the conveyor belt during operation is the shut-off shelf. This device is located at the very end of the unload section. 35. The shut-off shelf moves backward when wares contact it as the belt moves forward. 36. The shut-off shelf stops the conveyor belt. It also turns the blower dryer heat off (if equipped).
Operation: Step by Step Operating Instructions_ ________ Operation: Maintenance Daily Maintenance 1. Keep your dishwasher and the surrounding area clean. After each meal period or every 2 hours of operation, whichever occurs first and at the end of the day.
Operation: Step by Step _______________ Troubleshooting 17
Troubleshooting Troubleshooting On occasion your machine may not operate as expected. Use the checklist below before you decide that a mechanical or electrical failure has occurred. Checklist 1. Are the main disconnect switches, breakers, or motor overloads turned ON? 2. Are the main water and steam supplies turned ON? 3. Are the drain valves closed? 4. Are the spray pipes and rinse nozzles clean? 5. Are the spray pipes in the proper locations? 6. Are the pump intakes clean? 7.
Troubleshooting Troubleshooting CONDITION CAUSE SOLUTION A single pump will not run Motor overload tripped ....................... Defective motor Reset overload in control cabinet Contact your service agency Low or no water Main water supply is turned off .......... Turn on house water supply Drain valves are open.......................... Close all drain valves Doors are not fully closed ................... Faulty fill valve ...................................
Troubleshooting Troubleshooting CONDITION Low final rinse temperature CAUSE Low incoming water temperature ....... Defective thermometer ........................ Defective thermostat ........................... High limit thermostat tripped .............. Low steam pressure............................. Poor washing results Detergent dispenser not operating ...... Detergent supplied not strong enough ................................................. Wash water temperature too low Spray pipes clogged ..
What is a Plumbing & Electrical Connection Diagram? Installation Instructions_ _______ The plumbing and electrical Diagram, (P & E) 1. The dishwasher P&E is a documented drawing that contains the critical data for the proper construction and utility connections for the dishwasher. 2. The P&E was reviewed and approved by all authorized persons prior to shipment. 3. The sample diagram below illustrates the format and presentation of the data necessary to connect the dishwasher. 4.
Installation Installation Instructions_ _______ Installation Instructions 1. The Upright Conveyor dishwasher, (also called the flight-type conveyor), is assembled as a single unit from sections or modules. 2. This basic design is then customized to the customer's specifications. 3. The information presented blow explains the basic construction of the upright conveyor dishwasher. It does not cover custom-built innovations. 4. Study the diagrams on the next page, then continue reading below.
Installation _________ Installation Instructions All Models 1. The diagrams below show an example of one type of upright conveyor dishwasher. Your dishwasher may be different; however, the basic design is similar. 2. Study the diagrams and see if you can match features on your dishwasher. "C" Direction of Conveyor The conveyor direction of travel is referenced from the load section to the unload section.
Unpack and Place Installation Instructions_ _______ Installation IMPORTANT: Read all of these instructions before beginning the installation Unpack and place 1. Upright conveyor dishwashers ship in sections. Each section comes wrapped in a protective covering and secured toa wooden pallet. Labels note the totalnumber of sections shipped, such as 1 of 4. Accessories 2. Check the shipment for damage immediately upon receipt.
Unpack and Place _________ Installation Instructions 4 Installation Inspect the route that sections must travel if the shipment was not delivered to the dishwashing room. Measure allpassageways and doors before moving the dishwasher. IMPORTANT Check the utilities early Incorrect voltage, hot water supply, or steam piping may delay the completion of the installation 5. Piping on the rear wall of the dishwasher may be removed to allow the dishwasher to pass through narrow openings if necessary. 6.
Order of Assembly Installation Instructions_ _______ Installation The Order of Assembly 7. Next, compare the site utilities with the utility connections on the dishwasher. The utility locations and ratings of the must match the dishwasher when it is re-assembled in its permanent location. Contact a supervisor immediately if a utility location does not match the dishwasher. 8. Check floor stability. Flooring must support the weight of the dishwasher without bowing when weight is applied.
Order of Assembly _________ Installation Instructions Installation The Order of Assembly 12. The illustration above shows the correct placement of the sections. 13. The recommended spacing between sections is 2 feet. Of course, the size of your dishroom dictates the actual section spacing. 14. Study the illustration above. Note that each section name also contains a designated letter, (A, B, C, E). 15.
Section Assembly Installation Instructions_ _______ Section Assembly: 19. Remove the shipping braces from the sections. 20. Identify the location of piping between the sections. 21. Check the height of each section and determine which section is the highest due to floor variations. 22. Set the "C" section and adjust to its minimum height. 23. Level the "C" section side to side and front to back in several places with a bubble level. 24.
Section Assembly _________ Installation Instructions Section Assembly: 29. Make sure the sections are adjusted to the same height. 30. Check the alignment of the conveyor tracks inside the machine and adjust tracks if necessary. Tracks should align if the sections are level. 31. Bolt all the HOOD sections together with twenty (20), 5/1618 X 3/4" bolts, lockwashers and nuts included in the hardware kit. 32. Tighten the hood bolts in a cross-pattern to pull the sections together. 33.
Section Assembly Installation Instructions_ _______ Section Assembly 33. Bolt the section bases together using three (3) 1/2-13 X 1" bolts, lockwashers, and nuts from the hardware kit. 34. Recheck the level of the assembled sections and adjust as needed to achieve a common level line. 35. Refer to the photo on the right.Arrows show the proper installation of the section u-clip.All section joints must be capped by a u-clip. 36. Refer to the illustration on the next page. 37.
Section Assembly _________ Installation Instructions Section Assembly 31
Section Assemby Installation Instructions_ _______ Section Assemby Assembling the Conveyor Belt 1. The conveyor belt may be rolled up in the dishwasher. In either case the installation is the same. 2. Start at the unload end of the machine and pull the conveyor belt around the end sprockets until approximately 1-1/2 feet of belt rests on the upper track of the dishwasher. 3. Pull a section of belt from the next section along the upper track into the unload end. 4.
Section Assemby _________ Installation Instructions 13. RECHECK THE BELT TENSION IN 3 WEEKS AND ADJUST TO COMPENSATE FOR BELT STRETCH. 14. DO NOT OVERTIGHTEN THE BELT. 15. Locate the conveyor belt drive assembly located at the unload end of the dishwasher. 16. Refer to the photos on the right and note the arrangement of the drive clutch components. 18. Locate the clutch kit included in the hardware kit and install the components as shown. Tighten the clutch retaining nut. 19.
Section Assemby Installation Instructions_ _______ Section Assemby 21. The Installation Supervisor must inspect the position, level and proper connection of the piping connections. 22. Section joints must be capped by section u-clips and silicon must be trimmed around the hood joints. 23. Steam supply and condensate unions must be tight. 24. Drain piping must be checked. 25. Cross-flow hoses must be inspected and clamps tightened. 26. Flushing nozzle piping on the load end must be inspected. 20.
Section Assemby _________ Installation Instructions Section Assemby 27 Check and tighten the fill piping compression fittings. 28. Make sure solenoid coils are positioned correctly on the valve assemblies. 29. Vent stacks must be placed on the hood with vent handles facing the front of the dishwasher. 30. Panels must be rechecked for missing parts, and the location numbers checked with the numbers located on the dishwasher. 31.
Section Assemby Installation Instructions_ _______ Optional Blower Dryer Assemby Electric or Steam 1. The blower dryer comes in electric or steam. 2. It ships on a separate pallet. The vent cowl and mounting hardware are included in the accessories box and hardware kit. 3. Lift the blower dryer off the pallet with a forklift and place on the end of the unload section. If a forklift is not available, then four (4) men are needed to lift and install the unit manually. 36 4.
Section Assemby _________ Installation Instructions Section Assemby Connect the dishwasher internal electric wiring 1. Wires, flex-tite, and some components were disconnected and pulled back to each section, then junction boxes were closed. 2. Open all junction boxes, identify the flex-tite conduit connections, (A) roll-out wire bundles, (B), and match wire numbers attached on wires, (C). 3. Connect the flex-tite conduit to their associated junction boxes. 4.
Section Assemby Installation Instructions_ _______ Section Assemby Seal Section Joints 1. Section joints must be sealed with foodgrade silicon sealant. 2. Mask the joint edges with a quick-release masking tape. 3. Apply a 1/8" bead of Foodgrade silicon sealant. Apply moderate pressure on the gun to ensure the sealant fills the joint. 4. Wait 45-seconds for the sealant to firm slightly. Then wipe the joint with a damp cloth. Do not wait longer than 1 minute for the sealant to firm.
Section Assemby _________ Installation Instructions 8. Section Assemby Study the photos on the right. The top photo shows a correctly sealed joint. 9. The stainless steel must be wiped with Isopropyl alcohol to remove dust, oil film, and other contaminants. 10. Note that the joint is filled presenting an even transition between sections. 11. The sealant is applied past the top radius of the joint presenting a uniform fill. 12.. Study the lower sealed joint.
Supply Connections Installation Instructions_ _______ Supply Connections Main Incoming Power The Main incoming power to the dishwasher is made at the top of machine in the control cabinet. The electrician must connect the power supply in accordance with the data stamped on the Machine Electrical Connection Plate. MACHINE ELECTRICAL CONNECTION This data is the ultimate authority and is not superseded by any other data supplied in print, or conveyed verbally.
Supply Connections _________ Installation Instructions Supply Connections IMPORTANT Main utility supply connections must be performed by licenced tradesmen who abide by local building, health and sanitation codes or national codes in the absence of local codes.
Supply Connections Installation Instructions_ _______ Supply Connections Chemical Dispensers Chemical dispensing systems are supplied by others. A connection point for detergent, and rinse-aid signals is provided in the in the top-mounted control cabinet.
Supply Connections _________ Installation Instructions Initial Start-up Perform the following checks and adjustments before placing the machine into service. • Check the interior of the machine and remove any foreign material. • Check the exterior of the machine — make sure that the conveyor belt is free of tape and foreign material. Baffles – Tank baffles redirect the flow of water from the spray arm systems back into the tanks.
Initial Start-up Installation Instructions_ _______ Initial Start-up Check the direction of rotation of the conveyor belt by observing the direction arrow decal on the large conveyor drive sprocket. The sprocket is located on the side of the unload section. If rotation direction is incorrect, reverse wires L1 and L2 on the disconnect switch side of the main electrical connection terminal block located inside the control cabinet. Adjust the conveyor belt drive clutch.
Initial Start -up Check that the pumps and final rinse shut-off before the object reaches the conveyor shut-off shelf. Check that the conveyor belt stops when the object pushes the conveyor shut-off shelf. Move the shut-off shelf toward the tunnel of the machine. The conveyor belt will start moving again. Push the RED stop button. The conveyor belt will stop moving. Flip the power switch on the control cabinet to OFF. The red power light will go out.
Blank Page This Page Intentionally Left Blank 46
Service Replacement Parts Illustration Page Pump/Motor Assembly................................................................................................................................................................ 48 3HP, C3/C4 Pump Installation..................................................................................................................................................... 50 1HP, B-30 Prewash Right-Left Pump Installation........................................................
Pump/Motor Assembly 48
Pump/Motor Assembly 1 100735 HEX HEAD,1/4-20 X 5/8 SST 1 2 100736 HEX HEAD,1/4-20 X 3/4 SS T 10 3 100754 SCREW,FLAT HEAD,10-32 X 1/2 SST 3 4 102500 PLUG,1/4"NPT SQ.HEAD,BRASS 3 5 102504 PLUG,1/2"NPT SQ.HEAD,BRASS 1 6 106407 WASHER,LOCK,3/8 SPLIT,SST 4 7 106482 WASHER,LOCK,1/4 SPLIT,SST 11 8 107690 HEX PLAIN JAM NUT,3/8-16 SST 4 9 109654 SLINGER, JET PUMP 1 10 110247 HEX PLAIN JAM NUT,7/16-14 SST 1 11 110248 WASHER,FLAT,.440x.750x.
50 4 13 12 3 2 7 1 4 4 8 5 1 7 4 6 9 11 10 3 3HP, B4/C3/C4 Pump Installation
3HP, C3/C4 Pump Installation 1 100154 HEX PLAIN NUT,5/16-18 SST 10 2 100739 HEX HEAD,5/16-18 X 3/4 SST 2 3 100740 HEX HEAD,5/16-18 X 1 SS T 8 4 102376 WASHER,FLAT,5/16 x 3/4 x.
3 12 13 6 5 52 4 11 7 1 8 USED ON MACHINES WITH LOAD FLUSHING SYSTEM 10 9 7 4 1 5 4 3 1 7 4 15 4 3 14 16 1HP, B-30 Prewash Right-Left Pump Installation
1HP, B-30 Prewash Right-Left Pump Installation 1 100154 HEX PLAIN NUT,5/16-18 SST 12 2 100739 HEX HEAD,5/16-18 X 3/4 SST 4 3 100740 HEX HEAD,5/16-18 X 1 SST 8 4 102376 WASHER,FLAT,5/16x3/4x.06 SST 20 5 104203 CLAMP,HOSE,SST GEAR TYPE 2 6 104640 GASKET,PUMP SUCTION RACK/CC/UC 1 7 106013 WASHER,LOCK,5/16 SPLIT,SST 12 8 109926 FITTING,COMPRESSION,5/8OD X 1/2"MNPT,ELL,BRASS 1 9 110372 HOSE,PUMP SUCTION,UC 1 10 205192 TUBE,1/2"COPPER X 3.
54 3 16 14 4 2 15 4 7 USED ON MACHINES WITH LOAD FLUSHING SYSTEM 1 1 5 7 4 9 8 1 7 10 4 5 11 6 12 13 3 1HP, B-30 Prewash Left-Right Pump Installation
1HP, B-30 Prewash Left-Right Pump Installation 1 100154 HEX PLAIN NUT,5/16-18 SST 12 2 100739 HEX HEAD,5/16-18 X 3/4 SST 4 3 100740 HEX HEAD,5/16-18 X 1 SST 8 4 102376 WASHER,FLAT,5/16x3/4x.06 SST 20 5 104203 CLAMP,HOSE,M52,71/95,SST GEAR TYPE 2 6 104640 GASKET,PUMP SUCTION RACK/CC/UC 1 7 106013 WASHER,LOCK,5/16 SPLIT,SST 12 8 109926 FITTING,COMPRESSION,5/8OD X 1/2"MNPT,ELL,BRASS 1 9 110372 HOSE,PUMP SUCTION,UC 1 10 205192 TUBE,1/2"COPPER X 3.
56 3 16 14 4 4 2 15 4 7 USED ON MACHINES WITH LOAD FLUSHING SYSTEM 1 5 1 7 4 9 8 1 7 10 4 5 11 6 12 13 3 3HP, B-30 Prewash Left-Right Pump Installation
3HP, B-30 Prewash Left-Right Pump Installation 1 100154 HEX PLAIN NUT,5/16-18 SST 12 2 100739 HEX HEAD,5/16-18 X 3/4 SST 4 3 100740 HEX HEAD,5/16-18 X 1 SST 8 4 102376 WASHER,FLAT,5/16x3/4x.06 SST 20 5 104203 CLAMP,HOSE,M52,71/95,SST GEAR TYPE 2 6 104640 GASKET,PUMP SUCTION RACK/CC/UC 1 7 106013 WASHER,LOCK,5/16 SPLIT,SST 12 8 109926 FITTING,COMPRESSION,5/8OD X 1/2"MNPT,ELL,BRASS 1 9 110372 HOSE,PUMP SUCTION,UC 1 10 205192 TUBE,1/2"COPPER X 3.
3 12 58 13 6 5 4 11 7 1 8 USED ON MACHINES WITH LOAD FLUSHING SYSTEM 10 7 4 9 5 1 4 3 1 7 4 15 4 3 14 16 3HP, B-30 Prewash Right-Left Pump Installation
3HP, B-30 Prewash Right-Left Pump Installation 1 100154 HEX PLAIN NUT,5/16-18 SST 12 2 100739 HEX HEAD,5/16-18 X 3/4 SST 4 3 100740 HEX HEAD,5/16-18 X 1 SST 8 4 102376 WASHER,FLAT,5/16x3/4x.06 SST 20 5 104203 CLAMP,HOSE,M52,71/95,SST GEAR TYPE 2 6 104640 GASKET,PUMP SUCTION RACK/CC/UC 1 7 106013 WASHER,LOCK,5/16 SPLIT,SST 12 8 109926 FITTING,COMPRESSION,5/8OD X 1/2"MNPT,ELL,BRASS 1 9 110372 HOSE,PUMP SUCTION,UC 1 10 205192 TUBE,1/2"COPPER X 3.
6 9 4 11 9 3 6 18 14 10 17 5 8 13 15 1 8 12 16 2 7 R-L SHOWN Auxiliary Rinse Right-Left Pump Installation 60
Auxiliary Rinse Right-Left Pump Installation 1 100023 STREET ELBOW,3/4"NPT X 90,SST 1 2 100051 NIPPLE,3/4"NPT X CLOSE,SST 1 3 100154 HEX PLAIN NUT,5/16-18 SST 4 4 100739 HEX HEAD,5/16-18 X 3/4 SST 4 5 100740 HEX HEAD,5/16-18 X 1 SST 4 6 102376 WASHER,FLAT,5/16x3/4x.
62 MANIFOLD TRACK SUPPORTS (WELDED IN HOOD) 25 15 27 13 8 26 9 10 27 SUPPORT ANGLES (WELDED IN HOOD) 14 12 1 5 14 21 23 16 2 FRONT LOWER CONVEYOR TRACK 19 6 12 22 4 24 18 20 5 5 1 6 7 17 3 3 11 11 C8 Wash/Rinse Wash System Installation
C8 Wash/Rinse Wash System Installation 1 100734 HEX HEAD,1/4-20 X 1/2 SST 14 2 100755 SCREW,FLAT HEAD,1/4-20 X 1/2 SST 4 3 104414 O-RING,1 X 1 1/4 X 1/8 9 4 106014 HEX ACORN PLAIN NUT,1/4-20 SST 4 5 106026 WASHER,FLAT,1/4x5/8x.
64 11 11 3 3 23 24 5 1 4 18 FRONT LOWER CONVEYOR TRACK 6 25 17 20 2 7 5 1 SUPPORT ANGLES (WELDED IN HOOD) 5 22 6 8 19 14 21 13 9 26 12 13 15 10 29 27 12 16 30 15 30 MANIFOLD TRACK SUPPORTS (WELDED IN HOOD) 1HP 30" Prewash Right-Left Wash System Installation
1HP 30" Prewash Right-Left Wash System Installation 1 100734 HEX HEAD,1/4-20 X 1/2 SST 14 2 100755 SCREW,FLAT HEAD,1/4-20 X 1/2 SST 4 3 104414 O-RING,1 X 1 1/4 X 1/8 5 4 106014 HEX ACORN PLAIN NUT,1/4-20 SST 5 106026 WASHER,FLAT,1/4x5/8x.
66 9 28 MANIFOLD TRACK SUPPORTS (WELDED IN HOOD) 30 16 30 9 SUPPORT ANGLES (WELDED IN HOOD) 29 12 14 8 10 15 5 27 1 12 13 6 26 18 22 13 2 20 FRONT LOWER CONVEYOR TRACK 15 17 4 21 1 6 5 7 24 19 25 5 3 11 23 3 11 1HP 30" Prewash Left-Right Wash System Installation
1HP 30" Prewash Left-Right Wash System Installation 1 100734 CAP SCREW,HEX HEAD,1/4-20 X 1/2 SST 14 2 100755 SCREW,FLAT HEAD,1/4-20 X 1/2 SST 4 3 104414 O-RING,1 X 1 1/4 X 1/8 5 4 106014 HEX ACORN PLAIN NUT,1/4-20 SST 4 5 106026 WASHER,FLAT,1/4x5/8x.
68 MANIFOLD TRACK SUPPORTS (WELDED IN HOOD) 9 16 27 28 29 9 29 10 8 SUPPORT ANGLES (WELDED IN HOOD) 15 1 5 15 12 6 14 19 21 23 12 2 17 26 24 22 25 1 5 5 6 FRONT LOWER CONVEYOR TRACK 4 20 13 7 18 3 3 11 11 C4 Single Tank Wash System Installation
C4 Single Tank Wash System Installation 1 100734 HEX HEAD,1/4-20 X 1/2 SST 14 2 100755 SCREW,FLAT HEAD,1/4-20 X 1/2 SST 3 104414 O-RING,1 X 1 1/4 X 1/8 4 106014 HEX ACORN PLAIN NUT,1/4-20 SST 5 106026 WASHER,FLAT,1/4x5/8x.
70 MANIFOLD TRACK SUPPORTS (WELDED IN HOOD) 27 16 29 14 8 28 10 9 29 SUPPORT ANGLES (WELDED IN HOOD) 15 12 5 1 15 22 20 6 12 24 17 18 2 13 23 26 21 5 FRONT LOWER CONVEYOR TRACK 4 25 5 1 6 7 19 3 3 11 11 C6 Wash/Rinse Wash System Installation
C6 Wash/Rinse Wash System Installation 1 100734 HEX HEAD,1/4-20 X 1/2 SST 14 2 100755 SCREW,FLAT HEAD,1/4-20 X 1/2 SST 4 3 104414 O-RING,1 X 1 1/4 X 1/8 9 4 106014 HEX ACORN PLAIN NUT,1/4-20 SST 4 5 106026 WASHER,FLAT,1/4 x 5/8 x .
C4 Wash without Scrap Basket Electric Tank Heat Installation 72
C4 Wash without Scrap Basket Electric Tank Heat Installation 1 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 2 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 3 100154 HEX PLAIN NUT,5/16-18 SST 12 4 100198 WELD-STUD,10-32 X 1/2 LG.SST 4 5 100547 LOCKNUT,1/2" NPT,SST 2 6 100740 CAP SCREW,HEX HEAD,5/16-18 X 1 SST 12 7 102376 WASHER,FLAT,5/16x3/4x.06 SST 24 8 106013 WASHER,LOCK,5/16 SPLIT,SST 12 9 106026 WASHER,FLAT,1/4x5/8x.
74 Control thermostat High limit thermostat C4 Rinse without Scrap Basket Electric Tank Heat Installation
C4 Rinse without Scrap Basket Electric Tank Heat Installation 1 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 2 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 3 100154 HEX PLAIN NUT,5/16-18 SST 8 4 100198 WELD-STUD,10-32 X 1/2 LG.SST 4 5 100547 LOCKNUT,1/2" NPT,SST 2 6 100740 HEX HEAD,5/16-18 X 1 SST 8 7 102376 WASHER,FLAT,5/16x3/4x.06 SST 16 8 106013 WASHER,LOCK,5/16 SPLIT,SST 8 9 106026 WASHER,FLAT,1/4x5/8x.
76 21 11 19 22 4 11 High limit thermostat 3 Control thermostat 8 12 6 9 10 13 6 5 21 15 7 2 9 17 20 18 14 1 16 C4 Wash with Scrap Basket Electric Tank Heat Installation
C4 Wash with Scrap Basket Electric Tank Heat Installation 1 100097 SCREW,TRUSS HEAD,10-32 x 1/2 SS T 2 2 100100 SCREW,ROUND HEAD,8-32 x 1/4 SS T 2 3 100154 HEX PLAIN NUT,5/16-18 SST 12 4 100547 LOCKNUT,1/2" NPT,SST 2 5 100740 HEX HEAD,5/16-18 X 1 SST 12 6 102376 WASHER,FLAT,5/16x3/4x.06 SST 24 7 104985 HEX PLAIN NUT,10-32 SST 4 8 106013 WASHER,LOCK,5/16 SPLI T,SST 12 9 107033 WASHER,FLAT,.208X.438X.
C4 Rinse with Scrap Basket Electric Tank Heat Installation 78
C4 Rinse with Scrap Basket Electric Tank Heat Installation 1 100097 SCREW,TRUSS HEAD,10-32 x 1/2 SST 2 2 100100 SCREW,ROUND HEAD,8-32 x 1/4 SST 2 3 100154 HEX PLAIN NUT,5/16-18 SST 8 4 100547 LOCKNUT,1/2" NPT,SST 2 5 100740 HEX HEAD,5/16-18 X 1 SST 8 6 102376 WASHER,FLAT,5/16x3/4x.06 SST 16 7 104985 HEX PLAIN NUT,10-32 SST 4 8 105695 WELD-STUD,10-32 X 3/8 LG.
Auxiliary Rinse Electric Tank Heat Installation 80
Auxiliary Rinse Electric Tank Heat Installation 1 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 2 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 3 100154 HEX PLAIN NUT,5/16-18 SST 4 4 100198 WELD-STUD,10-32 X 1/2 LG.SST 4 5 100547 LOCKNUT,1/2" NPT,SST 2 6 100740 HEX HEAD,5/16-18 X 1 SST 4 7 102376 WASHER,FLAT,5/16x3/4x.06 SST 8 8 106013 WASHER,LOCK,5/16 SPLIT,SST 4 9 106026 WASHER,FLAT,1/4x5/8x.06 SST 2 10 106486 WASHER,LOCK,#10 SPLIT,SST 4 11 107033 WASHER,FLAT,.208X.438X.
Electric Booster Element Configuration NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO. 3 3 3 EUCCW-6 / EUCC-6 EUCCW-4 / EUCC-4 40°F / 22° Rise 3 BOOSTER ASSY,ELEC,R-L,15kW@208V 100003 HEX PLAIN NUT, 1/4-20 SST 9 106482 WASHER, LOCK, 1/4 SPLIT SST 9 111235 HEATER 5KW_6.
Electric Booster Element Configuration NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO.
Electric Booster Element Configuration NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO. 3 & 4 3 4 EUCCW-6 / EUCC-6 EUCCW-4 / EUCC-4 70°F / 39° Rise 3 BOOSTER ASSY,ELEC,R-L,25kW@208V 100003 HEX PLAIN NUT, 1/4-20 SST 9 106482 WASHER, LOCK, 1/4 SPLIT SST 9 111232 HEATER 10KW 208V,3PH BOOSTER 2 111235 HEATER 5KW_6.
Electric Booster Element Configuration NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO.
Electric Booster Element Configuration 3 NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO. 3 & 4 EUCC-4 / EUCC-3 40°F / 22° Rise 4 BOOSTER ASSY,ELEC,R-L,16kW@208V 3 100003 HEX PLAIN NUT, 1/4-20 SST 9 106482 WASHER, LOCK, 1/4 SPLIT SST 9 107909 HEATER 6KW/8KW, 208/240V,3PH BOOSTER 1 111235 HEATER 5KW/6.
Electric Booster Element Configuration NOTE: The location of a booster heater element is critical for the proper repair of the booster. VERIFY THE LOCATION OF ITEM NO.
88 20 24 18 27 21 19 17 2 1 23 3 8 31 10 11 7 4 16 28 5 29 25 9 6 14 22 15 26 30 12 13 Left-Right Electric Booster Installation
Left-Right Electric Booster Installation 1 100003 HEX PLAIN NUT,1/4-20 SST 11 2 100097 SCREW,TRUSS HEAD,10-32 x 1/2 SST 2 3 100100 SCREW,ROUND HEAD,8-32 x 1/4 SST 2 4 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 5 100113 CAP,3/4" NPT SST 1 6 100154 HEX PLAIN NUT,5/16-18 SST 6 7 100734 HEX HEAD,1/4-20 X 1/2 SST 2 8 100736 HEX HEAD,1/4-20 X 3/4 SST 2 9 100739 HEX HEAD,5/16-18 X 3/4 SST 2 10 100740 HEX HEAD,5/16-18 X 1 SST 4 11 102376 WASHER,FLAT,5/16x3/4x.
Right-Left Electric Booster Installation 1 100003 HEX PLAIN NU T,1/4-20 SST 11 2 100097 SCREW ,TRUSS HEAD,10-32 x 1/2 SST 2 3 100100 SCREW ,ROUND HEAD,8-32 x 1/4 SST 2 4 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 5 100 113 CA P,3/4" NPT SS T 1 6 100154 HEX PLAIN NU T ,5/16-18 SS T 6 7 100734 HEX HEAD,1/4-20 X 1/2 SST 2 8 100736 HEX HEAD,1/4-20 X 3/4 SST 2 9 100739 HEX HEAD,5/16-18 X 3/4 SST 2 10 100740 HEX HEAD,5/16-18 X 1 SST 4 11 102376 WASHER,FLAT ,5/16x3/4x.
Right-Left Electric Booster Installation 13 102438 ELBOW ,STREE T,1/2"NP T X 90, BRASS 1 14 102505 PLUG,3/4"NPT SQ.HEAD,BRASS 1 15 106013 WASHER,LOCK,5/16 SPLIT,SST 6 16 106026 WASHER,FLAT,1/4x5/8x.
92 9 15 11 R-L SHOWN L-R USES OPPOSITE HAND OF THIS BRACKET 11 9 8 7 1 8 5 13 16 13 1 8 3 7 14 10 4 6 17 FINAL RINSE THERMOMETER LOCATION R-L SHOWN, FOR L-R ROTATE STREET ELBOW 180° Final Rinse Installation EUCC8 / EUCCW8
Final Rinse Installation EUCC8 / EUCCW8 * ------- 101529* 114717* (Before 11/18/09) PLUG 1/8" BRASS SQUARE HD. (Beginning 11/18/09) BUSHING, RED.
94 16 12 11 8 7 1 8 5 R-L SHOWN L-R USES OPPOSITE HAND OF THIS BRACKET 9 9 14 14 17 1 8 7 3 15 10 4 6 18 FINAL RINSE THERMOMETER LOCATION R-L SHOWN, FOR L-R ROTATE STREET ELBOW 180° Final Rinse Installation C4 / C6 EUCC / EUCCW
Final Rinse Installation C4 / C6 EUCC / EUCCW 1 2 3 4 5 6 7 8 9 10 11 --12 --13 14 --15 16 17 18 ---- 100003 100109 100156 100516 100734 102461 106026 106482 106734 109924 111203 111203 114181 114181 114183 206580 206580 329800 330551-2 330553 601822 100209 HEX PLAIN NUT,1/4-20 SST WELD-STUD,1/4-20 X 1/2 LG.SST LOCKNUT,3/4" NPT,BRASS STREET ELBOW,1/2"NPT X 90,SST HEX HEAD,1/4-20 X 1/2 SST NIPPLE,1/2"NPT X 2"LG.,SST WASHER,FLAT,1/4 x 5/8 x .
9 96 9 8 7 8 13 14 14 6 5 4 1 15 7 1 11 10 6 11 5 3 12 R-L SHOWN, FOR L-R USE OPPOSITE HAND BRACKET 6 10 Auxiliary Rinse Installation EUCC/EUCCW
Auxiliary Rinse Installation EUCC/EUCCW 1 100003 HEX PLAIN NUT,1/4-20 SST 3 2 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 3 3 100585 LOCKNUT,1" NPT,BRASS 1 4 100734 HEX HEAD,1/4-20 X 1/2 SST 2 5 106026 WASHER,FLAT,1/4x5/8x.
Blank Page This Page Intentionally Left Blank 98
Blank Page This Page Intentionally Left Blank 99
Cold Water Fill Piping Sub-assembly 2 8 11 7 9 1 10 5 4 6 3 100
Cold Water Fill Piping Sub-assembly 1 100209 NIPPLE,1/2"NPT X CLOSE,BRASS 1 2 100500 108349 VACUUM BREAKER,1/2" NPT BRONZE REPAIR KIT 1 3 100704 NIPPLE,RTOE,1/2"NPT X 1 3/4"LG.,SST 1 4 100709 LOCKNUT,1/2" NPT,BRASS 1 5 102435 ELBOW, 1/2"NPT x 90 DEG,BRASS 1 6 102436 ELBOW,1/2"NPT X 90, SST 1 7 102438 ELBOW,STREET,1/2"NPT X 90, BRASS 3 8 102485 NIPPLE,1/2"NPT X 1 1/2"LG.,BRASS 1 9 102582 NIPPLE,1/2"NPT X 7 1/2"LG.
Electric Booster Fill Piping (Prior to S/N J09062644) 4 8 6 1 7 1 1 1 1 1 10 2 9 5 R-L Direction Shown 3 L-R Direction Shown 102
Electric Booster Fill Piping (Prior to S/N J09062644) Item No. Part No. Description Qty. 1 100184 NIPPLE,3/4"NPT X CLOSE,BRASS 6 2 3 4 5 6 7 100571 102444 102504* 102521 102525 107550 UNION,3/4"NPT,BRASS ELBOW,STREET,3/4"NPT X 90, BRASS PLUG,1/2"NPT SQ.
Electric Booster Fill Piping (Beginning with S/N J09062644 and above) 10 7 5 1 11 1 2 2 3 12 2 6 9 R-L Direction Shown 2 8 4 L-R Direction Shown 104
Electric Booster Fill Piping (Beginning with S/N J09062644 and above) 1 2 3 4 5 6 7 8 9 10 11 12 ----- 100184 100209 102392 102438 102504 102525 102526 102549 108265 109879 110768 113352 113392 113357 NIPPLE, 3/4" NPT X CLOSE BRASS NIPPLE, 1/2" NPT X CLOSE BRASS BUSHING, REDUCING, 3/4" NPT X 1/2" NPT BRASS ELBOW, STREET 1/2" X 90° BRASS PLUG, 1/2" NPT SQ.
Fill Piping - No Booster (Prior to S/N J09062644) 8 3 5 10 4 1 7 1 9 6 11 7 2 106 12 12 1
Fill Piping - No Booster (Prior to S/N J09062644) 1 2 3 4 5 6 7 8 9 10 11 ----12 100184 102392 102504 102521 102526 107550 107967 109926 109879 110768 111437 114839 111472 A511-8 NIPPLE, 3/4" NPT X CLOSE BRASS BUSHING, REDUCING, 3/4" NPT X 1/2" NPT BRASS PLUG, 1/2" NPT SQ. HEAD BRASS TEE, 3/4" NPT BRASS TEE, RED, 3/4" X 3/4" X 1/2" NPT BRASS VALVE, PRESSURE REGULATING, 3/4" NPT BRONZE HEX GRIP NUT, 1/4-20 SST W/NYLON FITTING, COMP. 5/8" OD X 1/2" MNPT, ELL BRASS FITTING, COMP.
Fill Piping - No Booster (Beginning with S/N J09062644 and above) 9 3 5 1 7 11 6 4 8 10 108 12 2 2 13 2 13 7 1
Fill Piping - No Booster (Beginning with S/N J09062644 and above) 1 2 3 4 5 6 7 8 9 10 11 12 ----13 100184 100209 102504 102525 102526 102549 107967 108265 109879 109926 110768 113352 113392 113357 332454 NIPPLE, 3/4" NPT X CLOSE BRASS NIPPLE, 1/2" NPT X CLOSE BRASS PLUG, 1/2" NPT SQ. HEAD, BRASS TEE, RED. 3/4" X 1/2" X 3/4" NPT BRASS TEE, RED. 3/4" X 3/4" X 1/2" NPT BRASS UNION, 1/2" NPT BRASS HEX GRIP NUT, 1/4-20 SST W/NYLON VALVE, PRESSURE REGULATING, 1/2" NPT BRONZE FITTING, COMP.
#120-1 Steam Booster Installation RL 9 12 4 5 2 11 2 6 8 8 1 1 5 10 6 7 8 3 110 1
#120-1 Steam Booster Installation RL 1 100140 HEX PLAIN NUT,3/8-16 SST 6 2 100153 HEX HEAD,3/8-16 X 1 SST 4 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100739 HEX HEAD,5/16-18 X 3/4 SST 2 5 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 6 104618 WASHER,FLAT,3/8x7/8x.
#120-1 Steam Booster Assembly RL 40-70°F 112
#120-1 Steam Booster Assembly RL 40-70°F 1 100123 PETCOCK,1/4"NPT FEMALE,BRASS 1 2 100134 ELBOW,STREET,1NPT X 90,MI 2 3 100184 NIPPLE,3/4"NPT X CLOSE,BRASS 6 4 100209 NIPPLE,1/2"NPT X CLOSE,BRASS 2 5 100571 UNION,3/4"NPT,BRASS 1 6 100979 BUSHING,REDUCING,1 1/2"NPTx1"NPT,BI 2 7 102288 ELBOW,1/2"NPT X 90 DEG,M.I.
#120-1 Steam Booster Assembly RL 40-70°F Item No. Part No. Description Qty. 25 105780 UNION,1"NPT, MALLEABLE IRON 2 26 105782 NIPPLE,1/2"NPT X CLOSE.,B.I. 2 27 105786 NIPPLE,1/2"NPT X 3" LG.,B.I. 1 28 105847 NIPPLE,1"NPT X CLOSE,B.I. 1 29 105850 NIPPLE,1"NPT X 2" LG.,B.I. 3 30 105881 NIPPLE,1 1/2"NPT X CLOSE,B.I. 1 31 106051 STRAINER,LINE,2"NPT B.I. 1 32 106428 NIPPLE,1 1/2"NPT X 2" LG.,B.I. 1 33 106607 NIPPLE,2"NPT X CLOSE,B.I.
Blank Page This Page Intentionally Left Blank 115
#120-1 Steam Booster Installation LR 116
#120-1 Steam Booster Installation LR 1 100140 HEX PLAIN NUT,3/8-16 SST 6 2 100153 HEX HEAD,3/8-16 X 1 SST 4 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100739 HEX HEAD,5/16-18 X 3/4 SST 2 5 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 6 104618 WASHER,FLAT,3/8x7/8x.
#120-1 Steam Booster Assembly LR 40-70°F 118
#120-1 Steam Booster Assembly LR 40-70°F 1 100123 PETCOCK,1/4"NPT FEMALE,BRASS 1 2 100134 ELBOW,STREET,1NPT X 90,MI 2 3 100184 NIPPLE,3/4"NPT X CLOSE,BRASS 6 4 100209 NIPPLE,1/2"NPT X CLOSE,BRASS 2 5 100571 UNION,3/4"NPT,BRASS 1 6 100979 BUSHING,REDUCING,1 1/2"NPTx1"NPT,BI 2 7 102288 ELBOW,1/2"NPT X 90 DEG,M.I.
#120-1 Steam Booster Assembly LR 40-70°F Item No. Part No. Description Qty. 25 105780 UNION,1"NPT, MALLEABLE IRON 2 26 105782 NIPPLE,1/2"NPT X CLOSE.,B.I. 2 27 105786 NIPPLE,1/2"NPT X 3" LG.,B.I. 1 28 105847 NIPPLE,1"NPT X CLOSE,B.I. 1 29 105850 NIPPLE,1"NPT X 2" LG.,B.I. 3 30 105881 NIPPLE,1 1/2"NPT X CLOSE,B.I. 1 31 106051 STRAINER,LINE,2"NPT B.I. 1 32 106428 NIPPLE,1 1/2"NPT X 2" LG.,B.I. 1 33 106607 NIPPLE,2"NPT X CLOSE,B.I.
Blank Page This Page Intentionally Left Blank 121
Steam Coil Heat Installation C4 Wash, Rinse,15-30 PSI 122
Steam Coil Heat Installation C4 Wash, Rinse, 15-30 PSI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 100002 100007 100023 100109 100134 100147 100154 100198 100547 100740 102376 102554 105738 105739 105778 105780 105782 105783 105847 106013 106026 106486 107033 107136 107488 107966 107967 108345 109069 109580 109969 BOLT, HEX HD. 1/4-20 X 1-3/8" SST SCREW, TRUSS HEAD, 10-32 X 3/8" SST STREET, ELBOW 3/4" NPT X 90° SST WELD STUD, 1/4-20 X 1/2" LG.
Steam Coil Heat Installation C3 Wash, Rinse,15-30 PSI 124
Steam Coil Heat Installation C3 Wash, Rinse,15-30 PSI 1 100002 HEX HEAD,1/4-20 X 1 3/8 SST 4 2 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 3 100023 STREET ELBOW,3/4"NPT X 90,SST 1 4 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 5 100134 ELBOW,STREET,1NPT X 90,MI 1 6 100147 ELBOW,STREET,1/2NPT X 90,MI 1 7 100154 HEX PLAIN NUT,5/16-18 SST 8 8 100198 WELD-STUD,10-32 X 1/2 LG.
Steam Coil Heat Installation C3 Wash, Rinse,15-30 PSI 23 107033 WASHER,FLAT,.208X.438X.047 SST 4 24 107136 SCREW,HEX HEAD,10-32 x 3/8 SST 2 25 107488 NIPPLE,1/2"NPT X 3 1/2" LG.,B.I. 1 26 107966 HEX GRIP NUT,10-32 SST W/NYLON 4 27 107967 HEX GRIP NUT,1/4-20 SST W/NYLON 2 28 108345 GASKET,HEATER/STANDPIPE 2 29 109069 THERMOSTAT,CONTROL,WITH CAPILLARY 1 30 109580 NIPPLE,1/2"NPT X 11" LG.,B.I. EUCCW 1 --- 105796 NIPPLE,1/2"NPT X 7" LG.,B.I .
Blank Page This Page Intentionally Left Blank 127
Steam Coil Heat Installation Auxiliary,15-30 PSI 39 43 44 31 42 11 33 28 25 41 8 30 24 27 29 37 2 12 1 40 46 19 15 13 5 18 32 5A EUCC ONLY 20 5B EUCC ONLY 26 35 9 17 10 38 45 14 36 16 4 21 34 22 10 23 128 6
Steam Coil Heat Installation Auxiliary,15-30 PSI 1 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 2 100051 NIPPLE,3/4"NPT X CLOSE,SST 2 3 100109 WELD-STUD,1/4-20 X 1/2 LG.SST 2 4 100134 ELBOW,STREET,1NPT X 90,MI 2 5 100147 ELBOW,STREET,1/2NPT X 90,MI 3 5A 102288 ELBOW,1/2NPT X 90,MI EUCC 3 5B 107488 NIPPLE,1/2NPT X 3-1/2" LG. B.I. EUCC 3 6 100154 HEX PLAIN NUT,5/16-18 SST 8 7 100198 WELD-STUD,10-32 X 1/2 LG.
Steam Coil Heat Installation Auxiliary,15-30 PSI 24 106026 WASHER,FLAT,1/4x5/8x.06 SST 2 25 106486 WASHER,LOCK,#10 SPLIT,SST 2 26 106789 NIPPLE,1"NPT X 3 1/2" LG.,B.I. EUCCW 1 --- 105847 NIPPLE,1"NPT X CLOSE, B.I. EUCC 1 27 107033 WASHER,FLAT,.208X.438X.
Blank Page This Page Intentionally Left Blank 131
Steam Injector Heat Installation C4/C8,15-30 PSI 132
Steam Injector Heat Installation C4/C8,15-30 PSI 1 100003 HEX PLAIN NUT,1/4-20 SST 4 2 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 3 100134 ELBOW,STREET,1NPT X 90,MI 2 4 100154 HEX PLAIN NUT,5/16-18 SST 8 5 100547 LOCKNUT,1/2" NPT,SST 1 6 100734 HEX HEAD,1/4-20 X 1/2 SST 2 7 100740 HEX HEAD,5/16-18 X 1 SST 8 8 100854 CHECK VALVE,1" NPT BRONZE 1 9 102376 WASHER,FLAT,5/16x3/4x.06 SST 16 10 102554 UNION,3/4"NPT, SST 1 11 105739 ELBOW,REDUCING,1"NPT X 3/4"NPT X 90,M.I.
Steam Injector Heat Installation C4/C8,15-30 PSI 21 107136 SCREW,HEX HEAD,10-32 x 3/8 SST 2 22 107966 HEX GRIP NUT,10-32 SST W/NYLON 4 23 107967 HEX GRIP NUT,1/4-20 SST W/NYLON 2 24 108345 GASKET,HEATER/STANDPIPE 1 25 109069 THERMOSTAT,CONTROL,WITH CAPILLARY 1 26 109683 FLANGE,BLOCKOFF,HEATER/CROSSFLOW 1 27 110005 110007 VALVE, 1" ASCO (NO LONGER AVAILABLE) REPAIR KIT, 1" ASCO VALVE # L8220G007 ONLY 1 A/R --- 114800 114830 VALVE, 1" ASCO STEAM ASCO # L8220G410 REPAIR KIT, 1" A
Blank Page This Page Intentionally Left Blank 135
Steam Injector Heat Installation Auxiliary Rinse RL 26 19 25 8 13 3 15 14 4 16 1 7 17 11 9 10 31 12 28 30 5 36 35 23 27 34 6 24 18 21 22 29 22 33 2 136 20 32
Steam Injector Heat Installation Auxiliary Rinse RL 1 100003 HEX PLAIN NUT,1/4-20 SST 1 2 100007 SCREW,TRUSS HEAD,10-32 x 3/8 SST 3 3 100134 ELBOW,STREET,1NPT X 90,MI 2 4 100154 HEX PLAIN NUT,5/16-18 SST 4 5 100516 STREET ELBOW,1/2"NPT X 90,SST 1 6 100547 LOCKNUT,1/2" NPT,SST 1 7 100740 HEX HEAD,5/16-18 X 1 SST 4 8 100854 CHECK VALVE,1" NPT BRONZE 1 9 102376 WASHER,FLAT,5/16x3/4x.
8 15 18 138 5 14 10 1 16 13 19 12 12 2 20 6 14 17 7 3 12 11 9 18 6 4 Drain Installation B-30 Prewash RL
Drain Installation B-30 Prewash RL 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100161 ELBOW,2"NPT X 90,GALVANIZED 1 5 100735 HEX HEAD,1/4-20 X 5/8 SST 1 6 100739 HEX HEAD,5/16-18 X 3/4 SST 6 7 100740 HEX HEAD,5/16-18 X 1 SST 4 8 101939 NIPPLE,TOE,2"NPT X 11" LG.,GALV 1 9 101944 NIPPLE,2"NPT X 12 1/2" LG.,GALV 1 10 102376 WASHER,FLAT,5/16x3/4x.
140 4 8 18 6 13 3 17 11 7 10 20 7 13 12 6 14 11 1 6 16 9 19 2 11 5 18 15 Drain Installation B-30 Prewash LR
Drain Installation B-30 Prewash LR 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100161 ELBOW,2"NPT X 90,GALVANIZED 1 5 100735 HEX HEAD,1/4-20 X 5/8 SST 1 6 100739 HEX HEAD,5/16-18 X 3/4 SST 6 7 100740 HEX HEAD,5/16-18 X 1 SST 4 8 101954 NIPPLE,2"NPT X 21 1/2" LG.,GALV 1 9 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 10 106013 WASHER,LOCK,5/16 SPLIT,SST 2 11 106026 WASHER,FLAT,1/4x5/8x.
142 15 8 3 FRONT BASE ANGLE 13 17 5 20 12 6 5 1 3 9 14 17 19 2 DRAIN GUARD NOT USED ON SECTIONS WITH SCRAP BUCKET 8 5 16 11 3 18 8 4 15 10 5 Drain Installation C4 Wash, Rinse
Drain Installation C4 Wash, Rinse 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 4 4 100735 HEX HEAD,1/4-20 X 5/8 SST 1 5 100739 HEX HEAD,5/16-18 X 3/4 SST 8 6 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 7 104165 CLAMP,HOSE,M40,52/76,SST GEAR TYPE 4 8 106013 WASHER,LOCK,5/16 SPLIT,SST 4 9 106026 WASHER,FLAT,1/4x5/8x.06 SST 2 10 106631 NIPPLE,TOE,2"NPT X 12 3/4" LG.
144 19 3 4 15 DRAIN GUARD NOT USED ON SECTIONS WITH SCRAP BUCKET 6 9 14 21 1 17 7 5 10 11 2 3 FRONT BASE ANGLE 20 6 9 3 10 18 12 9 6 16 18 13 Drain Installation Auxiliary LR
Drain Installation Auxiliary LR 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 4 4 100735 HEX HEAD,1/4-20 X 5/8 SST 1 5 100736 HEX HEAD,1/4-20 X 3/4 SST 4 6 100739 HEX HEAD,5/16-18 X 3/4 SST 4 7 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 8 104165 CLAMP,HOSE,M40,52/76,SST GEAR TYPE 2 9 106013 WASHER,LOCK,5/16 SPLIT,SST 4 10 106026 WASHER,FLAT,1/4x5/8x.
9 3 4 1 15 12 10 1 4 15 3 6 11 13 7 8 2 14 Drain Installation D5 Unload 146
Drain Installation D5 Unload 1 100154 HEX PLAIN NUT,5/16-18 SST 2 2 100587 PLUG,1 1/2"NPT SQ.HEAD,B.I. 1 3 100739 CAP SCREW,HEX HEAD,5/16-18 X 3/4 SST 2 4 106013 WASHER,LOCK,5/16 SPLIT,SST 2 5 107340 CLAMP,HOSE,M28,33/57,SST GEAR TYPE 2 6 107342 DRAIN BASKET ASSY,DUO B02-050 1 7 107473 DRAIN TAILPIECE RINSE 1 8 109184 NIPPLE,TOE,1 1/4"NPT X 4" LG.,GALV 1 9 109189 NIPPLE,TOE,1 1/2"NPT X 36" LG.
148 8 6 10 13 11 7 17 3 20 10 1 3 6 14 12 11 13 9 6 16 19 11 2 5 15 4 Drain Installation B4 Prewash RL
Drain Installation B4 Prewash RL 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100161 ELBOW,2"NPT X 90,GALVANIZED 1 5 100735 HEX HEAD,1/4-20 X 5/8 SST 1 6 100739 HEX HEAD,5/16-18 X 3/4 SST 6 7 100740 HEX HEAD,5/16-18 X 1 SST 4 8 101956 NIPPLE,TOE,2"NPT X 21 3/4" LG.,GALV 1 9 102376 WASHER,FLAT,5/16 x 3/4 x .06 SST 4 10 106013 WASHER,LOCK,5/16 SPLIT,SST 2 11 106026 WASHER,FLAT,1/4x5/8x.
150 4 15 6 9 13 3 10 7 17 20 9 3 1 6 14 8 6 13 10 12 16 10 18 19 2 5 11 Drain Installation B4 Prewash LR
Drain Installation B4 Prewash RL 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 2 4 100161 ELBOW,2"NPT X 90,GALVANIZED 1 5 100735 HEX HEAD,1/4-20 X 5/8 SST 1 6 100739 HEX HEAD,5/16-18 X 3/4 SST 6 7 100740 HEX HEAD,5/16-18 X 1 SST 4 8 102376 WASHER,FLAT,5/16x3/4x.06 SST 4 9 106013 WASHER,LOCK,5/16 SPLIT,SST 2 10 106026 WASHER,FLAT,1/4x5/8x.06 SST 6 11 106631 NIPPLE,TOE,2"NPT X 12 3/4" LG.
152 15 13 17 5 20 3 9 3 14 5 16 10 17 19 2 10 DRAIN GUARD NOT USED ON SECTIONS WITH SCRAP BUCKET FRONT BASE ANGLE 9 12 7 5 1 11 3 9 6 18 15 4 5 Drain Installation C3 Wash,Rinse
Drain Installation C3 Wash,Rinse 1 100110 WELD-STUD,1/4-20 X 3/4 LG.SST 1 2 100141 HEX GRIP NUT,1/4-20 SST,CTR LOCK 1 3 100154 HEX PLAIN NUT,5/16-18 SST 4 4 100735 HEX HEAD,1/4-20 X 5/8 SST 1 5 100739 HEX HEAD,5/16-18 X 3/4 SST 8 6 101920 NIPPLE,TOE,2"NPT X 5 3/4" LG.,GALV 1 7 102376 WASHER,FLAT,5/16 x 3/4 x .06 SST 4 8 104165 CLAMP,HOSE,M40,52/76,SST GEAR TYPE 4 9 106013 WASHER,LOCK,5/16 SPLIT,SST 4 10 106026 WASHER,FLAT,1/4 x 5/8 x .
Electric Eyes, Start-Stop Station, Flushing Nozzles 900725� KIT, GREEN START SWITCH Items - 8, 11,18 900726� KIT, RED START SWITCH Items - 9,10,18 154
Electric Eyes, Start-Stop Station, Flushing Nozzles 1 105994 CLAMP,HOSE,M10,14/27,SST GEAR TYPE 2 2 107003 LOAD PLACARD ELEC EYE 2 3 107033 WASHER,FLAT,.208X.438X.
Idle Shaft Assembly A 104271 BUSHING, #350A TORQUE 1 B 102315 FRICTION DISC, #350A CLUTCH 2 C 108095 SPRING WASHER, #350A TORQUE LIMITER 2 D 107700 LOCKWASHER, #350A TORQUE LIMITER 1 --- 100485 COMPLETE CLUTCH ASSEMBLY 1 B A 156 C C D
Idle Shaft Assembly 1 100153 HEX HEAD,3/8-16 X 1 SST 4 2 100154 HEX PLAIN NUT,5/16-18 SST 4 3 100485 TORQUE LIMITER ASSY,#350 A-2 1 4 100740 HEX HEAD,5/16-18 X 1 SST 4 5 100746 HEX HEAD,3/8-16 X 1 1/4 SST 8 6 100794 V-BELT,4L-310 1 7 101156 CHAIN LINK,#50,INNER 36 8 102376 WASHER,FLAT,5/16x3/4x.06 SST 8 9 103163 SHEAVE,AK27,5/8 BORE 1 10 104265 BUSHING,3/8x5/8x3/4 LG.BRONZE 1 11 104271 BUSHING,TORQUE LIMITER,.54LG. #350TL 1 12 104618 WASHER,FLAT,3/8x7/8x.
Drive Assembly 13 8 7 3 2 1 9 4 12 5 Th set-up shown is for 2.2 pitch. For 2.7 pitch use P/N 108434.
Drive Assembly 1 104618 WASHER,FLAT,3/8x7/8x.
EUCCW Peg and Peg w/Upper Rod Conveyor Belts 160
EUCCW Peg and Peg w/Upper Rod Conveyor Belts 161
EUCCW Flat and Insulated Conveyor Belts 162
EUCCW Flat and Insulated Conveyor Belts 163
EUCCW Stainless Steel Conveyor Belt 164
EUCCW Stainless Steel Conveyor Belt EUCCW Stainless Steel Peg Belt with Upper Rod contains Items 2-8 and the Parts Listed Below 165
EUCC Peg and Peg w/Upper Rod Conveyor Belts 2 3 4 7 5 8 6 11 2 10 3 4 9 8 5 6 166 7
EUCC Peg and Peg w/Upper Rod Conveyor Belts 1 2 3 4 5 6 7 8 404105 110092 108378 108377 108435 114536 108875 108380 Rod Section, Peg Belt Link, Upright Spacer, 11/32" x 5/16" Spacer, 11/32" x 1-3/32" Link, Straight End, SST Roller, Plastic Pin, Cotter Rod, Drilled SST 5/16" x 24" A/R 9 1 8 4 2 2 1 1 2 3 4 5 6 7 8 9 10 11 404114 110092 108378 108377 100141 108435 114536 108875 108380 108376 108379 Rod Section, Peg Belt with Upper Rods Link, Upright Spacer, 11/32" x 5/16" Spacer, 11/32" x 1-3/32
EUCC Flat and Insulated Conveyor Belts 2 3 7 6 5 4 11 10 2 3 4 9 8 5 6 168 7
EUCC Flat and Insulated Conveyor Belts 1 2 3 4 5 6 7 402294 110094 108377 108435 114536 108875 108380 Two Rod Section, Flat Belt Link, Flat Spacer, 11/32" x 1-3/32" Link, Straight End, SST Roller, Plastic Pin, Cotter Rod, Drilled SST 5/16" x 24" A/R 18 16 8 2 2 1 1 2 3 4 5 6 7 8 9 10 11 402295 110094 109030 109282 100141 108435 114536 108875 108380 109225 109187 Two Rod Sections, Insulated Tray Belt Link, Flat Link, Upright, Poly Spacer, 11/32" x 1-1/32" Grip Nut, 1/4-20 SST Link, Straight End, SST R
EUCC Stainless Steel Conveyor Belt 2 4 3 8 5 170 6 7
EUCC Stainless Steel Conveyor Belt 1 2 3 4 5 6 7 8 --------111421 109282 108377 108435 108375 108380 108875 Rod Section, SST Peg Belt EUCC Link, Upright SST Spacer, 11/32" x 1-1/32" Spacer, 11/32" x 1-3/32" Link, Straight End, SST Roller, SST Rod, Drilled SST 5/16" x 24" Pin, Cotter (Not Shown) A/R 8 7 2 4 2 1 2 EUCC Stainless Steel Peg Belt with Upper Rod contains Items 2-8 and the Parts Listed Below ------- 100141 205067 105197 Grip Nut, 1/4-20 SST (Not Shown) Rod, Threaded, 1/4" x 18-3/8" (Not Sho
Vent Cowl Installation 172
Vent Cowl Installation 1 329806 VENT COWL WELDMENT, UCW-04 1 2 401486 VENT STACK 4 x 24 1 173
Curtain Installation B30/C8/ RL/LR 8 12 9 7 6 7 4 5 10 11 10 8 8 4 8 4 4 9 8 7 4 5 R-L 10 8 5 12 11 8 7 4 4 8 8 4 4 L-R 174 12 13 7 6 8 5
Curtain Installation B30/C8/ RL/LR R-L 1 100734 HEX HEAD,1/4-20 X 1/2 SST 12 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 12 3 106482 WASHER,LOCK,1/4 SPLIT,SST 12 4 112445 CURTAIN,SHORT,14 X 32,NUCCW 5 5 114111 CURTAIN,LONG,19 X 34 1/4,EUCCW 2 6 204949 CURTAIN,SHORT,10 X 32,NUCCW AUX-RINSE. 1 7 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 3 8 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 5 9 329719-2 BAFFLE, CURTAIN HANGER.
Curtain Installation B30/C4 RL/LR 9 6 11 13 9 10 9 8 7 12 10 9 8 4 11 4 6 8 5 4 R-L 9 8 5 7 4 4 8 8 10 11 7 9 4 L-R 176 10 12 4 7 6 8 5
Curtain Installation B30/C4 RL/LR R-L 1 100734 HEX HEAD,1/4-20 X 1/2 SST 10 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 10 3 106482 WASHER,LOCK,1/4 SPLIT,SST 10 4 112445 CURTAIN, DISHWASHER,UC MACHINE 3 5 114110 CURTAIN, DISHWASHER,UC MACHINE 1 6 114111 CURTAIN, DISHWASHER,UC MACHINE 2 7 204949 CURTAIN, DISHWASHER,UC MACHINE 1 8 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 3 9 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 4 10 329719-2 BAFFLE, CURTAIN HANGER.
Curtain Installation B4/C8 RL/LR 8 5 12 10 9 7 6 7 4 11 8 10 8 4 4 8 11 8 8 4 4 5 R-L 10 8 5 7 4 11 11 12 8 4 8 4 8 4 L-R 178 12 13 8 4 7 6 8 5
Curtain Installation B4/C8 RL/LR R-L 1 100734 HEX HEAD, 1/4-20 X 1/2 SST 12 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 12 3 106482 WASHER,LOCK,1/4 SPLIT,SST 12 4 112445 CURTAIN,SHORT,14 X 32,NUCCW 5 5 114111 CURTAIN,LONG,19 X 34 1/4,EUCCW 2 6 204949 CURTAIN,SHORT,10 X 32,NUCCW AUX. RINSE 1 7 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 2 8 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 6 9 329719-2 BAFFLE, CURTAIN HANGER.
Curtain Installation B4/C4 RL/LR 8 12 9 10 7 6 5 11 8 4 10 8 8 7 4 4 5 R-L 9 8 10 8 7 4 4 9 11 7 4 5 L-R 180 8 4 10 12 7 8 6 5
Curtain Installation B4/C4 RL/LR R-L 1 100734 HEX HEAD, 1/4-20 X 1/2 SST 8 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 8 3 106482 WASHER,LOCK,1/4 SPLIT,SST 8 4 112445 CURTAIN,SHORT,14 X 32,NUCCW 3 5 114111 CURTAIN,LONG,19 X 34 1/4,EUCCW 2 6 204949 CURTAIN,SHORT,10 X 32,NUCCW AUX. RINSE 1 7 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 2 8 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 4 9 329719-2 BAFFLE, CURTAIN HANGER.
Curtain Installation B4/C6 RL/LR 8 12 7 6 5 11 10 11 8 10 8 11 8 4 9 4 8 7 4 8 8 4 4 4 5 R-L 9 8 5 7 4 10 9 11 10 10 8 8 8 4 7 8 4 4 4 4 L-R 182 11 13 8 7 4 6 8 5
Curtain Installation B4/C6 RL/LR R-L 1 100734 HEX HEAD, 1/4-20 X 1/2 SST 14 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 14 3 106482 WASHER,LOCK,1/4 SPLIT,SST 14 4 112445 CURTAIN,SHORT,14 X 32,NUCCW 6 5 114111 CURTAIN,LONG,19 X 34 1/4,EUCCW 2 6 204949 CURTAIN,SHORT,10 X 32,NUCCW E2 1 7 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 2 8 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 7 9 329719-2 BAFFLE, CURTAIN HANGER.
Curtain Installation B30/C6 RL/LR 9 13 11 12 8 7 6 9 12 9 9 4 11 10 8 4 4 4 12 9 5 9 4 10 9 8 4 6 R-L 9 8 5 7 4 4 10 9 11 8 8 4 8 11 8 7 4 4 L-R 184 10 4 8 4 10 12 7 6 8 5
Curtain Installation B30/C6 RL/LR R-L 1 100734 CAP SCREW,HEX HEAD,1/4-20 X 1/2 SST 16 2 106026 WASHER,FLAT,1/4x5/8x.06 SST 16 3 106482 WASHER,LOCK,1/4 SPLIT,SST 16 4 112445 CURTAIN,SHORT,14 X 32,NUCCW 6 5 114110 CURTAIN,SHORT,14 X 34 1/4,EUCCW 1 6 114111 CURTAIN,LONG,19 X 34 1/4,EUCCW 2 7 204949 CURTAIN,SHORT,10 X 32,NUCCW E2 1 8 205432 ROD,CURTAIN,5/16 X 32"LG.SST,UCCW 3 9 206581 ROD,CURTAIN,5/16 X 34 1/4"LG.SST,UCCW 7 10 329719-2 BAFFLE, CURTAIN HANGER.
Tank Baffles EUCC/EUCCW R-L Direction Quad Rinse Power Rinse Wash Prewash 1/2 HP E2 PW/W/R 1 1 2 4 3 2 3 5 7 8 6 5 6 E2 EUCCW EUCCW PW/W/R EUCC 26-1/4" 26-1/4" EUCC 21" 21" 186
Tank Baffles EUCC/EUCCW Item No. Part No. Description Qty. 1 100734 BOLT, HEX HD.
188 21 20 43 42 36 37 38 42 43 43 30 42 35 44 23 29 27 38 39 40 26 25 22 28 23 24 33 32 31 Gauge PN 114183 Overlay PN 112094 41 19 Gauge PN 114183 Overlay PN 114273 19 13 7 8 9 10 11 12 14 15 16 Fuse 19 Gauge PN 114183 Overlay PN 112088 Final Auxiliary Power Rinse Rinse Rinse Gauge PN 109499 Overlay 112086 Power Prewash Wash Temperature Gauges (Right to Left Shown) 34 34 34 19 Gauge PN 109499 Overlay NONE 1 2 3 4 5 6 18 17 Control Cabinet (From S/N J
Control Cabinet (From S/N J2098 up to J08102541) Item No. 1 2 3 4 5 6 7 ------8 ----------------------9 ------10 ------11 ------12 ------13 14 15 16 17 --- Part No.
Control Cabinet (From S/N J2098 up to J08102541) Item No. Part No.
Blank Page This Page Intentionally Left Blank 191
Control Cabinet (S/N J08102541 up to J10012728) 19 19 20 19 19 19 17 16 44 18 1 30 24 25 8 34 2 24 25 9 3 24 25 21 22 24 25 34 31 33 5 11 6 24 25 24 25 4 10 32 24 25 43 26 27 28 29 13 7 24 23 42 15 14 12 34 46 24 23 45 40 41 DETERGENT 120V RINSE AID 120V COMMON COMMON VENT FAN 120V SIGNAL ONLY 39 40 41 40 41 36 35 37 37 38 D B C A Thermistor Installation 192
Control Cabinet (S/N J08102541 up to J10012728) Item No. 1 2 3 4 5 6 7 ------8 ----------------------9 ------10 ------11 ------12 ------13 14 15 16 17 --- Part No.
Control Cabinet (S/N J08102541 up to J10012728) Item No. 18 --19 20 --21 22 23 24 25 26 27 28 29 30 31 32 33 34 ------------------35 36 37 38 39 40 41 42 43 44 45 46 Part No. 111833 109014 111827 180081 112792 112351 112352 111068 111036 111067 304326 107198 108370 104858 111277 180171 111135 108424 111683 180172 180173 180174 180175 180176 180060 180059 180448 180042 111980 702804 0512213 114439.
Blank Page This Page Intentionally Left Blank 195
Control Cabinet (S/N J10012728 and above) 19 19 20 19 19 19 17 16 15 14 13 18 7 44 1 31 32 33 30 8 2 9 26 27 28 29 3 4 10 34 34 34 5 11 22 39 21 43 42 6 25 12 24 46 SIGNAL ONLY VENT FAN 120V COMMON RINSE AID 120V COMMON DETERGENT 120V 23 40 41 24 23 24 45 40 41 40 41 36 35 37 37 38 D B C A Thermistor Installation 196
Control Cabinet (S/N J08102541 and above) Item No. 1 2 3 4 5 6 7 ------8 ----------------------9 ------10 ------11 ------12 ------13 14 15 16 17 --- Part No.
Control Cabinet (S/N J08102541 and above) Item No. 18 --19 20 --21 22 23 24 25 26 27 28 29 30 31 32 33 34 ------------------35 36 37 38 39 40 41 42 43 44 45 46 Part No. 111833 109014 111827 180081 112792 112351 112352 111068 111036 111067 304326 107198 108370 104858 111277 180171 111135 108424 111683 180172 180173 180174 180175 180176 180060 180059 180448 180042 111980 702804 0512213 114439.
Blank Page This Page Intentionally Left Blank 199
Standard 30" Door Assembly 200
Standard 30" Door Assembly• 1 100734 HEX HEAD, 1/4-20 X 1/2 SST 3 2 100735 HEX HEAD, 1/4-20 X 5/8 SST 2 3 100750 SCREW, FLAT, 6-32 X 3/8 SST 2 4 104971 HEX GRIP NUT, 6-32 SST 2 5 106482 WASHER, LOCK, 1/4-20 SPLIT 5 6 107033 WASHER, FLAT SST 2 7 108954 HEX GRIP NUT, 6-32 SST W/NYLON 2 8 108966 HANDLE, DOOR 1 9 ---------- STUD, NOT A REPLACEMENT PART -- 10 ---------- RIVNUT, NOT A REPLACEMENT PART -- 11 113719 REED SWITCH 1 12 113937 MAGNET, REED SWITCH 1 13 1
Split Door Assembly 202
Split Door Assembly 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 ----25 25 25 26 ----27 ----28 --29 --30 --31 --32 33 34 100003 100141 100142 104971 100734 100736 104584 104624 104882 ---------106026 106347 106482 106486 107589 108954 ---------------113719 113937 113979 114004 114100 329968 329969 330433 330453 330454 330455 330480 330481 330482 330498 330499 330500 330525 330550 330526 330548 330527 330540 330528 330546 330537 330539 330552 HEX PLAIN NUT 1/4-20 SST HEX GRIP NUT 1/4-20
Swing-Out Door Assembly B30 R-L/ E2 L-R 19 To Open 4 8 20 5 4 8 15 13 10 2 9 12 10 9 14 11 1 23 5 18 22 13 17 6 204 15 7 8 21 16 Right to Left Shown 4 3
Swing-out Door Assembly B30 R-L/ E2 L-R 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 100141 100142 100734 100735 100771 104925 106026 106482 107033 108954 113719 113937 114705 114706 114826 114827 207003 207004 333324 333325 333327 333537 Hex Grip Nut, 1/4-20 SST Ctr. Lock Hex Grip Nut, 5/16-18 SST Ctr. Lock Bolt, Hex Hd., 1/4-20 x 1/2" SST Bolt, Hex Hd., 1/4-20 x 5/8" SST Set Screw, 1/4-20 x 1/4" Lg. Cup Point SST Washer, Flat 1/4" x 1" x .06" SST Washer, Flat 1/4" x 5/8" x .
Swing-Out Door Assembly E2 R-L /B30 L-R 8 5 4 23 8 7 4 19 To Open 20 13 15 19 14 2 3 18 16 1 15 22 5 10 13 6 17 9 8 4 206 21 12 10 9 11 Right to Left Shown
Swing-out Door Assembly E2 R-L /B30 L-R 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 100141 100142 100734 100735 100771 104925 106026 106482 107033 108954 113719 113937 114705 114706 114826 114827 207003 207004 333324 333326 333327 333537 Hex Grip Nut, 1/4-20 SST Ctr. Lock Hex Grip Nut, 5/16-18 SST Ctr. Lock Bolt, Hex Hd., 1/4-20 x 1/2" SST Bolt, Hex Hd., 1/4-20 x 5/8" SST Set Screw, 1/4-20 x 1/4" Lg. Cup Point SST Washer, Flat 1/4" x 1" x .06" SST Washer, Flat 1/4" x 5/8" x .
Swing-Out Door Assembly C4 10 19 9 12 4 8 21 4 5 To Open 8 19 19 7 13 3 2 To Open 14 22 15 16 1 20 11 18 12 15 13 17 6 8 4 10 5 23 15 25 18 24 15 23 13 17 6 8 4 208 5 11 9 19
Swing-out Door Assembly C4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 100141 100142 100734 100735 100771 104925 106026 106482 107033 108954 113719 113937 114705 114706 114826 114827 207003 207004 333324 333225 333326 333327 333537 Hex Grip Nut, 1/4-20 SST Ctr. Lock Hex Grip Nut, 5/16-18 SST Ctr. Lock Bolt, Hex Hd., 1/4-20 x 1/2" SST Bolt, Hex Hd., 1/4-20 x 5/8" SST Set Screw, 1/4-20 x 1/4" Lg. Cup Point SST Washer, Flat 1/4" x 1" x .06" SST Washer, Flat 1/4" x 5/8" x .
Scrap Screens EUCCW #330907 EUCCW Scrap Screen without Bucket C3 and B-30 P/N 330213 Handle P/N 108966 Screws (2) P/N 100073 EUC Refuse Bucket Cover C4 P/N 329109 EUCCW Screen Suppport with Bucket EUC Refuse Bucket C3 and B30 P/N 330188 B4/C4 #329109 C3/B-30 #330188 B-30/C3 #330187 B4/C4 #329643 P/N 329113 P/N 329115 EUCC #330739 EUCC #330741 EUCCW Scrap Screen without Bucket C4 and B4 #329683 EUCCW Scrap Screen with Bucket C4 and B4 #329688 EUCCW Scrap Screen without Bucket Aux.
25KW WASH HEAT 30KW WASH HEAT VOLTAGE 208-220V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 230-240V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 380V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 415V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 480V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 575V TOTAL KW KW/CO
25KW WASH HEAT 20KW RINSE HEAT VOLTAGE 208-220V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 230-240V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 380V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 415V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 480V TOTAL KW KW/CONTACTOR CONTACTOR # CONTACTOR RATING FUSE BLOCK # FUSE RATING VOLTAGE 575V TOTAL KW KW/C
1 L1 L2 L3 120V CONTROLS 1A GND P1 FU T1 LINE V P2 LINE 1 6 120V LOAD 1A FU 1 1 5M 1A 77 CAP 79 2 2MOL 10 1CR BRN SP 3 ST 4 ECONO RINSE MOTOR BLK WHT 3MOL 3M 71 72 73 4MOL 7MOL 10 7 DRIVE MOTOR AUTO 6 EER 12 PREWASH MOTOR 13 7 15 6 15 PT MANUAL 6 2 1 CLUTCH 4 7 M 2 6 8 5 15 7 OFF DELAY 3 WASH MOTOR 9 OFF ON 1 CLUTCH 4 7 M 2 6 8 5 9 15 15 15 15 15 RINSE MOTOR 5M 16 DIGITAL DISPLAY RINSE SIGNAL 1M 9 16 7M 80 19 10 16 TS 20 ELECTRIC HEAT
