User Manual

12
Cleaning, De-liming and Maintenance
Cleaning
1. Remove any wares remaining in the sink.
2. Push the OFF push button to stop the pumps and heater.
3. Turn the drain handles to the 3 o'clock position to fully open the drains.
4. Remove the scrapper baskets, pump suction strainer and scrap screen.
Thoroughly flush both sides of the screen to clean.
5. Flush the interior of the sink compartments.
6. Wipe the sink interiors with a soft cloth and mild detergent. Flush clean.
7. Check the water level sensor making sure it is clean and free of debris.
8. Reassemble the sink.
Remove the screens, pump suction strainer and scrap screen.
OPEN
CLOSED
DRAIN
Pump Suction
Strainer
Scrap
Screen
Utensil Basket
(if equipped)
Water
Level
Sensor
Scrapper
Baskets
Perform the steps below after each shift at the end of the day.
Clean the water level sensor.
De-liming
Contact your chemical supplier for de-liming chemicals and the proper procedures for de-liming
the sink in the event that de-liming is required.
Maintenance
There are no lubrication points for this machine.
Contact your authorized Champion service agent for a yearly service check if desired.