User's Guide
Table Of Contents
- 1. Introduction
- 2. Getting Started
- 3. Operational Examples
- 3.1 System Setup Examples
- 3.2 Cable Replacement Examples with CYSPP
- 3.3 Remote Control Examples with CYCommand
- 3.4 GAP Peripheral Examples
- 3.5 GAP Central Examples
- 3.6 GATT Server Examples
- 3.7 GATT Client Examples
- 3.8 Security and Encryption Examples
- 3.9 Beacon Examples
- 3.10 Performance Testing Examples
- 3.11 Device Firmware Update Examples
- 4. Application Design Examples
- 5. Host API Library
- 6. Troubleshooting
- 7. API Protocol Reference
- 8. GPIO Reference
- 9. Cypress GATT Profile Reference
- 10. Configuration Example Reference
- Revision History
Configuration Example Reference
EZ-Serial BLE Firmware Platform User Guide, Doc. No. 002-11259 Rev. *E 228
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=142A
/CAC,T=0000,R=01,W=00,C=02,L=0004,D=
10.2.7 Reference Time Update Service (0x1806)
Official documentation for this service can be found on the Bluetooth SIG Developer website.
/CAC,T=2800,R=01,W=00,C=00,L=0000,D=0618
/CAC,T=2803,R=01,W=00,C=04,L=0000,D=162A
/CAC,T=0000,R=02,W=02,C=04,L=0001,D=
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=172A
/CAC,T=0000,R=01,W=00,C=02,L=0002,D=
10.2.8 Next DST Change Service (0x1807)
Official documentation for this service can be found on the Bluetooth SIG Developer website.
/CAC,T=2800,R=01,W=00,C=00,L=0000,D=0718
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=112A
/CAC,T=0000,R=01,W=00,C=02,L=0008,D=
10.2.9 Glucose Service (0x1808)
Official documentation for this service can be found on the Bluetooth SIG Developer website.
/CAC,T=2800,R=01,W=00,C=00,L=0000,D=0818
/CAC,T=2803,R=01,W=00,C=10,L=0000,D=182A
/CAC,T=0000,R=00,W=00,C=10,L=000A,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
/CAC,T=2803,R=01,W=00,C=10,L=0000,D=342A
/CAC,T=0000,R=00,W=00,C=10,L=0003,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=512A
/CAC,T=0000,R=01,W=00,C=02,L=0002,D=
/CAC,T=2803,R=01,W=00,C=28,L=0000,D=522A
/CAC,T=0000,R=02,W=02,C=28,L=0003,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
10.2.10 Health Thermometer Service (0x1809)
Official documentation for this service can be found on the Bluetooth SIG Developer website.
/CAC,T=2800,R=01,W=00,C=00,L=0000,D=0918
/CAC,T=2803,R=01,W=00,C=20,L=0000,D=1C2A
/CAC,T=0000,R=00,W=00,C=20,L=0005,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=1D2A
/CAC,T=0000,R=01,W=00,C=02,L=0001,D=
/CAC,T=2803,R=01,W=00,C=10,L=0000,D=1E2A
/CAC,T=0000,R=00,W=00,C=10,L=0005,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=212A
/CAC,T=0000,R=01,W=00,C=02,L=0002,D=
/CAC,T=2902,R=01,W=01,C=0A,L=0002,D=
/CAC,T=2906,R=01,W=00,C=02,L=0004,D=
10.2.11 Device Information Service (0x180A)
In the commands below, most identification data attributes are given 16-byte lengths (L=0010). You will most likely need
to modify these lengths according to the data you intend to write into the characteristics.
Official documentation for this service can be found on the Bluetooth SIG Developer website.
/CAC,T=2800,R=01,W=00,C=00,L=0000,D=0A18
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=292A
/CAC,T=0000,R=01,W=00,C=02,L=0010,D=
/CAC,T=2803,R=01,W=00,C=02,L=0000,D=242A
/CAC,T=0000,R=01,W=00,C=02,L=0010,D=