User's Manual

1.1 Safety & Caution
Please read the following safety statements carefully.
1. Please preserve this user’s manual for reference.
2. Before cleaning the equipment, the power must be cut off. Do not use
liquid or spray type of detersive to clean the equipment. Please use
dampish cotton cloth to clean the equipment.
3. Keep the equipment dry to avoid short circuit.
4. During installation the equipment must be fixed at solid table to avoid
damage caused by falling.
5. Before inserting power please ensure the voltage is healthy to the
equipment.
6. For safety please tie wire well and don’t put anything on the wire.
7. If equipment is not been used for long time, please cut off the power to
avoid damage from surge power.
8. Don’t spray any liquid on this scanner as it may cause fire or short circuit.
9. Please do not open the equipment. For safety only qualified serviceman
can open the equipment.
10. If there are the following situations please contact the qualified
serviceman to check this equipment.
(a) The damage of wire.
(b) Liquid infiltrates into the equipment.
(c) The equipment has been exposed to wet environment.
(d) The equipment can’t work well.
(e) The equipment has any obvious damage that makes it working
abnormally.
11. Do not store the equipment at the temperature lower than -20°C (-4°F) or
higher than +70°C (158°F) to avoid any damage.