User`s manual

2
2. Quick Start
2.1 Standard Shipment Package
The standard shipment package is provided with the
following items.
- 2D Imager Scanner (IG-300 or IG-300BT)
- Cradle or Charger (optional for IG-300BT)
- Power Adaptor (if applied)
- Communication Cable
- Skip resistant pad
- Iron panel of cradle and screw
Visually inspect the device and accessories for any
evidence of physical damage. If anything is missing
or appears to be damaged, immediately contact your
dealer.
2.2 Start Up
A. IG-300 Series
The interface setting of the device has been set by
the manufacturer, your device can plug and play
without any setting.
Connect the communication cable on the RJ45
connector inlet of the scanner and your POS or Host
system. Power-on the device with the provided
power supply if applicable. Press the trigger button
and aim the barcode which covered by the LED red
light zone. You will hear a beep sound and the
green LED indicator will light on after scan
successfully.
In case you will use the IG-300 with USB Virtual
COM port emulation, please contact with your dealer
and download the correct USB driver for Virtual COM
port.
B. IG-300BT Series
Connect the communication cable provided to your
POS or Host system and cradle. Power on the
cradle with the provided power supply and scan the