User`s manual

3. Program Sequence

You can setup your device by scanning all necessary

programming codes for parameters that meet

applications. After these scan(s), the device is

automatically configured.

The Chapter 4 to 9 provides you with the

programming codes necessary for a basic setup. For

more advanced setup options, please see the User’s

Manual

3.1 Factory Default Settings

The default RS232 settings are 57600 baud, 8 data

bits, and no parity.

The factory default settings are shown with bold

< > in the following pages.

By Scanning “Set factory default” code, the setting

will go back to the factory default setting. If you are

using a USB interface, your device will be lost USB

interface settings, please re-configure USB

parameter

Set factory default