Quick start manual

www.chamsys.co.uk MagicQ Software Quick Start
25 of 44
Adding in FX
To add a FX to some heads, select the heads then from the Group Window or the Prog Window press the ADD FX soft
button. Choose the Waveform FX to add.
MagicQ has two types of Waveform FX – those that are designed for specific attributes – for example circle is always
applied to pan and tilt, and Waveform FX that can be applied to any attribute – for example Ramp, Since, Cosine.
Waveform FX that can be applied to any attribute are shown with a *, and prompt the user to choose the attribute to
apply the FX to.
Once you have chosen a FX you are returned to the Prog Window. Use the encoders to modify the parameters of the
FX such as the speed, size and spread between heads.
You can add multiple FX to a head, provided that the FX uses different attributes - e.g. you can mix a Pan Sine with a
Tilt Sine.
If you wish to remove an FX, use the “Remove FX” softbutton.