Quick start manual

www.chamsys.co.uk MagicQ Software Quick Start
42 of 44
• The top 48 faders allow you to control the individual channels of the light. Hold the SHIFT key if you wish to
have higher accuracy on the faders. The Output values are shown in the Outputs section. Press CLEAR to clear
the changes you have made with these faders.
• If you have a ChamSys MagicDMX interface you can connect this to a USB port and control the fixture directly.
• If you have a 3rd party DMX interface then you will need to change into the Normal mode by pressing the Norm
button on the top right. Then go to Setup, View DMX I/O and set up Universe 1 to the type of your DMX interface
and enable Universe 1.