User's Manual

6
For more information, visit www.chandlerlimited.com. © 2020 Chandler Limited, Inc. All Rights Reserved. REDD-MIC_UM_010820
Abbey Road Studios, EMI, REDD and their associated logos are trademarks of EMI (IP) Limited.
PAD
Facility to decrease sensitivity of the
microphone by -10db exists, and is made
available from the microphone body via
toggle of the PAD switch to the downward
position, using the supplied pattern select
screwdriver.
TIP- Use the PAD feature in scenarios where
the sound incidence is overloading the
capsule.
POWER SUPPLY & AUXILIARY
CONTROLS
The power supply (PSU,) supplied with the
REDD Microphone kit is wired localized for
regional AC, either 110V or 220V (115/230V,
depending upon country of purchase. A
REDD Microphone kit purchased in a region
where AC is 110V (115V) standard cannot be
used in 220V (230V,) unless it is modified
for the correct operating voltage or an
external power converter is used. NOTE:
Some external power converters.
PSU REAR PANEL
AC POWER
At the rear panel of the PSU, exists a
standard male IEC connector for connection
to AC power, using the supplied IEC cable.
Also at the rear PSU panel is bayonet style
fuse compartment. For fuse replacement
procedure and value, please reference the
maintenance section of the manual.
POWER SWITCH
The master power switch is located at
the bottom left of the PSU rear panel and
labeled ON/OFF. Once all connections, to
and from the microphone to the PSU have
been made, flip the power switch to supply
mains power to the microphone. NOTE: The
microphone head basket will illuminate,
signifying power is on.
FUSE
000001
Chandler Limited
REDD MICROPHONE
CAUTION AVIS
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR FACEPLATE)
DO NOT EXPOSE TO RAIN OR MOISTURE
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR