Operator`s manual

leaning Foam Sleeve Filter

in the upside down position, carefully remove foam sleeve filter. (fig.4)

Symptom Possible Causes Corrective Action

1. With the removed power head

2. Use a mild soap and water solution to wash foam sleeve filter and rinse with clean water. (fig.5)

3. Allow filter to air dry before installing and using again.

TROUBLESHOOTING

WARNING! TO REDUCE THE RISK OF ELECTRIC SHOCK-UNPLUG BEFORE TROUBLESHOOTING

Vacuum will not operate – cord, 1) No power supply. 1) Check power supply

breakers, fuses.

2) Faulty power cord. eck the power

2) Unplug and ch

cord. If damaged, have it repaire

by a professional.

3) Container full. r. 3) Empty containe

Dust comes out from motor cover. lter or collection artridge filter 1) The cartridge fi

bag is missing or damaged.

1) Attach or replace c

or collection bag.

Reduced efficiency and nozzle hose and

motor/speed vibration.

1) There is a blockage in the

or hose, or the container inlet. Or

dust filter blocked by fine dust.

1) Check nozzle,

container inlets for blockage. Take

off the filter and clean it. Or install

new cartridge filter.