Operator`s manual

DR
Y
-
V
ACUUM OPERATION
7
RY VACU
RE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED ‘SAFETY
D UMING
WARNING: BE SU
INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE GASES, VAPORS,
OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS INCLUDE BUT ARE NOT
LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-BASE PAINTS, GASOLINE,
ALCOHOL OR AEROSOL SPRAYS. EXPLOSIVE DUSTS INCLUDE BUT ARE NOT LIMITED TO;
COAL, MAGNESIUM, GRAIN OR GUN POWDER. TO REDUCE THE RISK OF HEALTH HAZARDS
FROM VAPORS OR DUST, DO NOT VACUUM TOXIC MATERIALS.
CAUTION:
m drywall dust or fireplace soot or ash with standard Wet/Dry filter. This is a very fine dust
ARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET. MAKE SURE PLUG IS
• Do not vacuu
which will not be captured by the filter and may cause damage to motor. When vacuuming fine dust use a
fine dust filter (sold separately).
W
DISCONNECTED BEFORE CHANGING AND CLEANING FILTERS.
1. Verify that the power cord is disconnected from the outlet. (fig.1)
cartridge filter is securely mounted.
b, taking care not to damage
head back on the container, and secure it in place using the latches. (fig.5)
PERATING INSTRUCTIONS: DRY VACUUMING
port and screw in place. Push the required attachment
6.
‘I’ ON position. (fig.8)
osition and unplug the power cord
O NOT USE THE CARTRIDGE FILT
2. In order to prepare your vacuum for dry vacuuming, verify that the
With power head removed and in upside down position, make sure the filter is pushed in until it stops
against the power head and the retainer is installed. (fig.2 & 3) (Your Wet/Dry Vac comes with the
cartridge filter pre-installed, if not, see page 10 for installation instructions.)
3. Optional, for improved dust filtering, fit collection bag flange onto the inlet stu
the bag. (fig.4)
4. Place the power
O
. Insert the locking end of the hose into the vacuum5
onto the free end of the hose or extension. (fig.6)
Plug in the power cord into the outlet. (fig.7)
7. Turn the motor on by flipping the switch to the
8. Once you have completed vacuuming, flip the switch to the ‘O’ OFF p
from the outlet.
O = OFF I = ON
ER FOR LIQUID VACUUMING D
DO NOT USE COLLECTION BAG FOR LIQUID VACUUMING