User's Manual
5
Important Placement Guidelines
Repeater is water-resistant and is designed for general outdoor use, however,
to extend its life place the repeater in an area protected from direct weather
elements.
Hang the repeater using the integrated hang hole or hanger, or by using string
(not included) to hang it from a suitable location.
• Repeater must be within 330 ft (100 m) of companion units (sold seperately).
• To maximize wireless range, place repeater away from large metallic
items, thick walls, metal surfaces, or other objects that may limit wireless
communication.
• To prevent wireless interference, place repeater at least 3 ft (0.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.).
Problem Possible Solution
Companion product (i.e.
Display) showing poor
sensor reception
If the companion product's wireless signal indicator
shows poor reception, it may be an indication that it
is still connecting directly to the sensor, instead of the
repeater.
1. Power down the companion product (unplug power
adapter, remove batteries).
2.Conrmthatthesensorisconnectedtotherepeater.
Therepeater'sactivechannelIDwillash,indicating
that the sensor's data is being transmitted.
3. Relocate the sensor to its original location.
4. Place the repeater according to suggested
placement (see page 4).
5. Power on the companion product.
Available sensor not
connecting to repeater
IftheLEDindicatordoesnotash:
• Relocate the repeater and/or Monitor/Sensor. The
products must be within 330 ft (100 m) of each other.
• Make sure products (Repeater, display, Monitors,
Sensors) are placed at least 3 feet (.9 m) away
from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium
batteries in Repeater, Monitors and Sensors when
temperature is below -4ºF/-20ºC). Do not use
heavy duty or rechargeable batteries.
NOTE: It may take a few minutes for repeater and
sensors to synchronize after batteries are replaced.