User's Manual

DIGITAL THERMO SENSOR (MODEL NO. W091) OWNER'S MANUAL

Thank you for purchasing the new generation electronic thermo sensor.

Designed and engineered with the state-of-art technology and components,

this instrument will provide accurate and reliable measurement of outdoor

temperature and humidity, and a 433MHz RF communication with your

weather station. Read this manual carefully to full explore the features and

functions of the new product.

Name and Functions of Switch and Buttons:

CH Select Channel 1,2,3

TX Force transmission of RF signal

C/F Select the reading between C and F

BATTERY INSTALLATION

Lift off the back cover by pulling the bottom slot, insert 2 pcs AAA batteries

according to the polarity indicated. Replace the cover after the batteries are

inserted.

SETTING UP THE WIRELESS THERMOMETER:

• For the first installation, always insert batteries to the home unit and then the

remote sensor.

• Set Channel 1 for the first remote sensor. Set channel 2 and channel 3 for

the additional 2nd and 3rd sensors.

• Press the Tx button on the back of remote sensor to verify the RF reception.

C/ F SELECTION

Press “C/F“ to select degree C/ degree F on the LCD display.

LOW BATTERY INDICATION

Low battery indication is available for the remote sensors. Replace the

batteries and follow the setup procedure as mentioned in this instruction

manual.

BATERY DISPOSAL

Replace only with the same or equivalent type recommended by the

manufacturer.

Please disposal of old, defective batteries in an environmentally friendly

manner in accordance with the relevant legislation.

FCC ID: RNEW091TX

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

SPECIFICATIONS

Range of temperature measurement:

Remote sensor : -20 C to +60 C (-4 F to +140 F)

PAGE 1
DIGITAL THERMO SENSOR (MODEL NO. W091) OWNER'S MANUAL Thank you for purchasing the new generation electronic thermo sensor. Designed and engineered with the state-of-art technology and components, this instrument will provide accurate and reliable measurement of outdoor temperature and humidity, and a 433MHz RF communication with your weather station. Read this manual carefully to full explore the features and functions of the new product.
PAGE 2
Channel : Transmission : Resolution : Batteries : 3 up to 30M (100 ft.) open area, RF434 MHz 0.1 degree for temperature, 1% for humidity AAA x 2 pcs Modifications not authorized by the manufacturer may void users authority to operate this device Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.