User's Manual

User Manual
2 Administrators card registration
2. 1 Administrators card registration
-Administrator card is used when a user registered in the SG-2000 series.
- Registration procedure [Table 2]
순 번 설 명
1
Check. After the terminal installed the green LED emits light when the user
information is not present.
2 If this check, the tagging device in the RFID card is included in the set.
3 If the blue LED flashes a success.
[Table 2] Administrators card registration procedure
- The administrator card is used for the purpose of registration.
- Administrator card can apply for only one card when the stand alone.
- When the network mode, look at the S/W manual.