Specifications

ManualsBrandsCHANG YOW ManualsElectronicsBluetooth module

Table Of Contents

说明书

1、Specification：

-1. Bluetooth module：BLE006

1-2. Bluetooth specification：Bluetooth 5.1､Class2

1-3. MCU: FREQCHIP FR8018HA SoC solution

1-3. Operation voltage：DC1.8~3.3V

1-4. Modulation：GFSK

1-5. Operation frequency：2402MHz~2480MHz

1-6. Channel number：40

1-7. Channel separation：2MHz

1-8. Antenna type：PCB Antenna

1-9. Antenna Gain：0 dBi

1-4. Communication type：GPIO,UART, SPI, I2C, PWM, ADC

The module complies with FCC Part 15C requirements.

2､ Circuit Description：

BLE006 is a Bluetooth 5.1 module based on FREQCHIP FR8018HA SoC, the main function is linking

other Bluetooth device via GATT profile or customize protocol to exchange data or control electronic device.

3、Block Diagram：

Model BLE006 Buletooth module

Date July 13, 2021

Specification

Summary of content (8 pages)

PAGE 1
Specification Model BLE006 Buletooth module Date July 13, 2021 1、Specification： 1-1. Bluetooth module：BLE006 1-2. Bluetooth specification：Bluetooth 5.1､Class2 1-3. MCU: FREQCHIP FR8018HA SoC solution 1-3. Operation voltage：DC1.8~3.3V 1-4. Modulation：GFSK 1-5. Operation frequency：2402MHz~2480MHz 1-6. Channel number：40 1-7. Channel separation：2MHz 1-8. Antenna type：PCB Antenna 1-9. Antenna Gain：0 dBi 1-4. Communication type ：GPIO,UART, SPI, I2C, PWM, ADC The module complies with FCC Part 15C requirements.
PAGE 2
4、Schematic： 5、BLE006 Module photo：
PAGE 3
6. Module Dimension (L)16mm / (W)10mm / (H)2.
PAGE 4
7. PCB Layout TOP Layout 8.
PAGE 5
9.
PAGE 6
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 7
IC Statement -English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device. This device complies with exemption from the current assessment limits in section 2.
PAGE 8
L'exploitation est soumise aux deux conditions suivantes: (1) Ce dispositif ne peut causer d'interférences; et (2) Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product.