Instruction Manual Manuel D'Utilisation MODEL: 102714-A
English IMPORTANT SAFEGUARDS PLEASE READ ALL INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Do not touch hot surfaces. Use handles or knobs. To protect against electrical shock, do not immerse the cord, plugs, or the unit in water or other liquid. Close supervision is necessary when any appliance is used by or near children. Unplug from outlet when not in use and before cleaning.
15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. least as great as the electrical rating of the appliance. b) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. A short power-supply cord (or detached power supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
SPECIFICATION: Item number: 102714-A Power Rate: 1800W Voltage:120V~60Hz Temperature: 150°F – 450°F (65 °C – 232 °C) HOW TO USE: 1. Before turning on the power, make sure the cookware is on the ceramic plate with ingredients inside. 2. After plugging the plug into the socket, the LED indicator will display the letter “L”, meaning that the temperature of the ceramic glass plate is lower than 150 °F (65 °C).
7. After cooking is completed, press the ON/OFF button again to turn off the unit. 8. After the cooking time reaches 150 minutes, the LED indicator will display the letter “EE”, emit a sound, then the unit will enter the standby mode. Press the ON/OFF button to restart the unit. NOTICE If using the TEMP or HEAT function when the unit is used for 150 minutes without setting the TIMER function, the LED indicator will display the letter “EE” and emit a sound. The unit will stop automatically.
If the pots/pans are used without being cleaned, as this may result in discoloration or stains. Do not use benzene, thinner, scrubbing brush or polishing powder to clean the induction cooker. Wipe down the unit using a dish washing agent and a damp cloth Use vacuum cleaner to suck up dirt from the air intake and exhaust vent. Never run water over the unit (If water gets inside it may cause malfunction). WARNING Any other servicing should be performed by an authorized service representative.
Error Code E2 Cause and Solution Voltage over 145 V. E3 The accessory and spare parts are damaged. Please contact the nearest authorized service facility for troubleshooting, repair, or adjustment. The accessory and spare parts are damaged. Please contact the nearest authorized service facility for troubleshooting, repair, or adjustment. The appliance is too hot. The cooking temperature is over 450 °F (232 °C). After the unit has been cooled down, the unit will automatically switch to standby mode.
Français GARANTIES IMPORTANTES Lisez toutes les instructions Lorsque vous utilisez des appareils électriques, utilisez les précautions de sécurité de base ainsi que les suivantes: 1. Ne touchez pas les surfaces chaudes. Utilisez des poignées ou des boutons 2. Pour vous protéger contre les chocs électriques, ne plongez pas l'appareil, le cordon ou les prises dans l'eau ou tout autre liquide 3. Une surveillance étroite est nécessaire lorsque tout appareil est utilisé par ou près des enfants 4.
élevée que la puissance nominale de l'appareil * Le cordon doit être disposé de façon à ce qu'il ne puisse pas se déposer sur le comptoir ou sur le dessus de la table, où il pourrait être tiré par des enfants ou trébucher involontairement 15. Utiliser un cordon d'alimentation court (ou détachable) pour réduire le risque d'emmêlement ou de trébucgenebt avec un cordon plus long. 16.
Si la fiche ne rentre pas complètement dans la prise, inversez la prise. Si cela ne vous convient toujours pas, contactez un électricien qualifié. N'essayez pas de modifier la fiche de quelque façon que ce soit. 27. Ne pas préchauffer avant utilization. 28. Conserver les instructions. SPÉCIFICATION: Numéro d'article: 102714-A Taux de puissance: 1800W Tension: 120V ~ 60Hz Température :150°F – 450°F (65 °C – 232 °C) MODE D’EMPLOI 1.
appuyer sur le bouton REDUCE (réduire) ou INCREASE (augmenter) jusqu’à l’atteinte de la température appropriée (échelons de température : 120 °F (49 °C) , 150 °F (65 °C) , 180 °F (82 °C) , 210 °F (99 °C),240 °F (115 °C),270 °F (132 °C),300 °F (149 °C), 330 °F (165 °C),360 °F (182 °C),390 °F (199 °C),420 °F (215 °C) et 450 °F (232 °C)). 6. Pour sélectionner le minuteur automatique, appuyer sur le bouton TIMER (minuteur) (par défaut = 0 min). Le voyant du minuteur passera au rouge.
REMARQUE L’appareil s’éteindra complètement après 9 secondes (a) si la mauvaise batterie de cuisine est utilisée ou (b) s’il n’y a aucune batterie de cuisine sur l’appareil. USTENSILES UTILISABLES ET NON UTILISABLES: Casseroles compatibles: (Batterie de cuisine à induction uniquement ‐ utiliser une bandelette d'analyse magnétique) Acier ou fonte, fer émaillé, acier inoxydable, cuve à fond plat / pots de 4.75 "à 10.
LISTE DES CODES D'ERREUR: Si l'affichage LED indique le code d'erreur, référez-vous à la solution comme suit. Code d’erreur Affichage de « --- » et émission sonore Cause et solution Casserole inappropriée ou aucune casserole sur le cuiseur à induction. E1 Tension inférieure à 75 V. E2 Tension inférieure à 145 V. E3 Les accessoires et les pièces de rechange sont endommagés. Prière de contacter le centre de service autorisé le plus près pour dépannage, réparation ou réglage.
Code d’erreur E9 EE Cause et solution Ceci peut être occasionné par un chaudron concave. Changer de chaudron et redémarrer le cuiseur à induction. Si le code d’erreur apparaît toujours, prière de contacter le centre de service autorisé le plus près pour dépannage, réparation ou réglage. Le temps de cuisson maximal s’est écoulé. Appuyer sur le bouton ON (marche) pour redémarrer l’appareil au besoin.
It’s our great honor that you purchase ChangBERT products. If you need any help, please feel free to contact our customer service representative via email: contact@changberthome.