LCD COLOR TELEVISION LT1512E LT1712E LT2012E LT2612E LT3212E INSTRUCTION MANUAL Please read this manual carefully before operation.
CONTENTS Important Safety Instructions .......................................................................................... 3 Using the Remote Control................................................................................................ 5 Batteries for Remote Control ........................................................................................... 5 Packing List.......................................................................................................................
Important Safety Instructions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13.
Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 23.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
and/or cause old batteries to leak chemicals. ● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. ● The batteries supplied with the product may have a shorter life expectancy due to storage conditions. If the remote control is not used for an extended period of time, remove the batteries from the remote control.
In TV, AV, RGB and YPbPr modes, screen displays soft blue background if there is no signal input Multi Language On-Screen Display menu Ordinary and graphical user interface makes the menu operation user-friendly Power Energy Saving Mode (Power management mode) When used as PC display terminal without PC signal output, the LCD TV will automatically power off within 30 seconds and enter into the Power Energy Saving Mode. It will power up again when it receives a signal from PC.
Brief Introduction Front Panel LOCAL KEYS R/C RECEIVER INDICATOR POWER ON/OFF (except LT1512E) The button names and functions are as follows: Panel buttons Button 【TV/AV】 【MENU】 【VOL-】 【VOL+】 【CH-】 【CH+】 【 Description Switch between TV, AV, RGB, YPbPr, and PC signal sources The same function to【AV】on the remote control Enter or exit the OSD (On-Screen Display) menu The same function to【MENU】on the remote control Decrease the sound volume. Adjust functions in menu operation.
Rear Panel AC INPUT(except LT1512E) HEADPHONE OUTPUT Illustration of Signal Input Ports DC IN Note: The port of DC IN is only for LT1512E.
Remote Control Overview of the Remote Control Ajust displayable aspect ratio Power On/Off Reture to last viewed program Channel Number Signal Source Selection Picture Mode Selection Invalid Button On-screen Menu Invalid Button Sound Mode Selection Channel Up Enter Volume Down Volume Up Channel Down Name the programs in Menu mode Status Display Sleep Timer Invalid Button East/West Sound Mute Subcode Text Index Size Cancel Hold Reveal/Conceal Invalid Buttons PAGE 10
TV Functions Except Teletext Function 1 . RECALL : Return to last viewed program 2 . ZOOM : Adjust displayable aspect ratio 3 . POWER ON/OFF : Switch on or off TV set 4 . 0-9 Channel Keys : Key in the alphanumeric digits to switch to the designated channel directly 5 . TV/AV : Toggle between different signal sources available 6 . MENU : To go to the On Screen Display(OSD) menus 7 . P MODE : Select different modes of picture settings 8 . S MODE : Select different modes of sound settings 9 .
Teletext Function 1. 0-9 Channel Keys : Key in the alphanumeric digits to go to the designated page directly 2. P+ Keys : Press【P+】to scroll to the next page 3. P- Keys : Press【P-】to the previous page 4. L.ROTA Key : RED Teletext Button 5. PRE Key : GREEN Teletext Button 6. NEXT Key : YELLOW Teletext Button 7. R.ROTA Key : CYAN Teletext Button 8. TEXT Key : Switch between teletext on, mix and teletext off. 9. EAST/WEST Key 10.
Installation 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. The LCD TV is a high-tech digital product. Do use quality RF cable to obtain optimal results. 3. Connect the output terminal of the AV devices such as YPbPr, DVD to the corresponding terminal of the LCD TV. 4.
Menu Operation 1. Use the On Screen Display menu to set and adjust functions 2. Use 【P+】/【P-】 to select the desired menu after pressing【MENU】, then press 【V+】 /【OK】to enter the corresponding menu option and use 【P+】/【P-】to choose from the options; Use 【V+】/【V-】to adjust the options value and return to the previous menu by pressing 【MENU】again. The menu will disappear without any operation within 10 seconds.
Ⅲ Setup ● Language To select the different language displayed. ● Blue Back In this mode, a blue background will appear when there is no signal input. ● Program Lock In the submenu of Program Lock, the Enter Password menu appears (this menu will appear when you switch to a channel after it was locked once);. Input the default password of 1235, the submenu of Program Lock will be displayed if the password is correct.
Swap between two programs and their channels. This can be done by pressing Switch button after two different channels are selected.
● Color System To set the color system of the current program and use 【V+】/【V-】 to switch between PAL, NTSC,N4.43, SECAM and AUTO systems. ● Sound System To switch between D/K,L, B/G and I sound systems. ● Skip Skipping the unwanted program can dramatically quicken program selection. 1. Turn Skip on, pressing【P+】/【P-】can not select this program. 2. Input the program number directly to locate the program. Note: There is only Color System for the Tune Menu in AV, RGB and signal sources.
To automatically adjust the picture position, clock, phase and color temperature to a preset optimum value. This mode is invalid in DOS mode. Note: The PC Setup menu is only available in the PC signal source. Other Functions . ● Volume Control 1. Press【V+】to increase or【V-】to decrease the volume when there is no menu on the screen. The Volume bar will disappear if there left idle for more than 6 seconds. 2. Press the【MUTE】button on the remote control to turn On/Off the MUTE mode.
● Channel Switch Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】 on the panel or【P+】/【P-】on the remote control to select the channel number. If a channel number is in SKIP ON mode, the next channel will be displayed. A maximum of 2 digits can be keyed in at one time, the number button on the remote control is used. The symbol of “- -” on the upper-right corner represent tens and one respectively. The range is 0～99.
●TROUBLESHOOTING Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms Possible Causes No picture, no sound, and no indicator light on 1.The power cord is not plugged in 2.The power is off No picture, no sound, Functions of ON/OFF but the green light TIME and SLEEP have indicator been set No picture, no sound, but the yellow light indicator 1.PC is in VGA Mode without any PC signal input 2.
● SPECIFICATIONS LT1512E Items Specifications Size (diagonal) 15.0 inch Color System PAL, SECAM, NTSC Sound System D/K, I, B/G, L/L’ PC Displayable Input Format VGA / SVGA /XGA YPbPr Input Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p(50Hz, 60Hz) Audio Power Output 2 x 2.
LT1712E Items Specifications Size (diagonal) 17 inch Color System PAL, SECAM, NTSC Sound System D/K, I, B/G, L PC Displayable Input Format VGA / SVGA /XGA YPbPr Input Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p(50Hz, 60Hz) Audio Power Output 2 x 2.
LT2012E Items Specifications Size (diagonal) 20 inch Color System PAL, SECAM, NTSC Sound System D/K, I, B/G, L PC Displayable Input Format VGA / SVGA YPbPr Input Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p(50Hz, 60Hz) Audio Power Output 2 x 2.
LT2612E Items Specifications Size (diagonal) 26 inch Color System PAL, SECAM, NTSC Sound System D/K, I, B/G, L PC Displayable Input Format VGA / SVGA /XGA / WXGA 60HZ YPbPr Input Format 480i, 480p, 576i, 576p, 720p, 1080i, 1080p(50Hz, 60Hz) Audio Power Output 2x5W AV(S-Video)Input 2 (audio is using in communtiy) YPbPr Input 1 PC Input 1 AC Voltage Input Rated Power Consumption Please refer to the back label Standby Power Consumption ≤2W Unit Dimension 804mm(W)×510mm(H)×294mm(D) （in
LT3212E Items Specifications Size (diagonal) 31.
All the features and specifications are subject to change without notice.
