LCD COLOR TELEVISION TM150F7U TM201F7U OPERATION MANUAL Please read this manual carefully before operation.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......................................................................... 1 USING THE REMOTE CONTROL ...................................................................................3 BATTERIES FOR REMOTE CONTROL ..........................................................................3 PACKING LIST ............................................................................................................................4 GENERAL INFORMATION.......................
Important Safety Instructions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13.
Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 23.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
● Different types of batteries have different characteristics. Do not mix batteries of different types. ● Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old batteries to leak chemicals. ● Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. ● The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
Blue background with noise reduction: In TV/AV S-VIDEO and YPbPr modes, screen displays soft blue background if there is no signal input Multi Language On-Screen Display menu: Text and graphical user interface makes menu operation user-friendly Power Energy Saving Mode (Power management mode): When used as PC display terminal without PC signal output, the LCD TV will automatically power off within 30 seconds and enter into the Power Energy Saving Mode.
BRIEF INTRODUCTION Front Panel The button names and functions are as follows: Panel buttons Button 【SOURCE】 【MENU】 【VOL-】 【VOL+】 【CH-】 【CH+】 【 】 Description To switch between TV, AV, S-Video,YPbPr, and PC signal sources. The same function to【SOURCE】on R/C in menu operation. To enter or quit from the OSD (On-Screen Display) menu. The same function to【MENU】on R/C To decrease the sound volume. Adjust functions in menu operation. The same function to【Vol-】on R/C To increase the sound volume.
Rear Panel AC IN(only for W170F7U/TM201F7U) HEADPHONE OUTPUT Amplificatory Illustration of Signal Input Ports TM150F7U W170F7U,TM201F7U PAGE 7
REMOTE CONTROL Screen Size Mode Selection Power On/Off Recall Channel Number Signal Source Selection Invalid Button Picture Mode Selection Sound Mode Selection Invalid Button On-screen Menu Channel Up Enter Volume Up Volume Down Channel Down Name the programs in Menu mode Display Sleep Timer Picture Still Sound Mute Scan MTS CCD Favorite Invalid Buttons PIP Channel Up Location PIP Swap PIP Source Selection PIP Still PIP On/Off PIP Size PIP Channel Down PAGE 8
INSTALLATION 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal. The LCD TV is a high-tech digital product, Do use quality RF cable to obtain optimal results. 3. Connect the output terminal of the AV devices such as YPbPr, DVD to the corresponding terminal of your LCD TV. 4.
FUNCTION INTRODUCTION MENU OPERATION 1. Use the On Screen Display menu to set and adjust functions 2. Use 【CH+】/【CH-】 to select the desired menu after pressing 【MENU】, then press 【Vol+】【 / OK】to enter the next submenu; Use 【Vol +】【 / Vol -】to select the menu options and return to the precious menu by pressing 【MENU】again. The menu will auto disappear without any operation within 10 seconds.
signal as well as in other signal sources ⅢSetup ● Language To select the different language displayed ● Parent In the submenu of Parent, firstly the Access Code menu appears, you will see this menu when you switch to a channel after it was locked once : When Enter the Parent menu only two options of TV Rating and MPAA Rating appear on display, see it below.
●Program Lock Input the default password of 1235,the submenu of Parent will be on display if the password is correct. (a) When changing the password, the changed password will be updated after four digits are input. The word“ok” will appear after you make sure inputting the same number for twice, otherwise , the word “Failed” will appear if two passwords are different. （b）Unlock all the locked programs when Clear All is operated.
● Antenna .To display the RF antenna mode, when this mode is Air, Auto Search begins searching from channel 2 to channel 69; When this mode is Cable, Auto Search begins from channel 1 to channel 125. Then what have searched before would be stored in the corresponding EEPROM, meanwhile, the channels which have not been searched will be set to Erase mode automatically. ● Auto search Three situations for Auto Search to stop: 1. The TV does auto search and stores programs . 2.
1～12（PM）.When“Hour”turns to “--” “Minute”also turns to “--” accordingly, the function of Clock stops. ● Channel Select the Channel in Air from 2 to 69 or Cable from 1 to 125 by pressing 【Vol+】 【Vol-】 / circularly or numeric buttons directly; Select the items circularly by pressing 【CH+】【 / CH-】. 1.When TV is on, it turns directly to the preset channel if the preset Time is on; When TV is in standby mode, it firstly turns on and then goes to the preset channel If the preset Time is on. 2.
when the menu operation is exited. When there is no valid signal input, the TV will be mute (but no mute sign) 3. MTS ① Capable of identifying MTS automatically with the control status: the TV would memorize SAP after it is auto identified: the TV would memorize Stereo after it is auto identified; ② There is an OSD hint to show the changes in broadcasting signals: ③ Press 【MTS】to switch between Stereo /SAP Mono SAP Stereo 4.
● CCD Press 【CC】to see this menu, you can select the desired option among CC1~CC4、T1~T4 and OFF with 【CH+】/【CH-】, and confirm that by pressing【OK】 .● Favorites Press 【FAVOR】to see this menu on the right, these are the details: 1. Mode：including Auto and Manual. They are respectively stored in Air or Cable way； 2.
Note: This function is only available in TV mode ● Sleep Function Press【SLEEP】on the remote control once to activate the function and subsequent keying in to select the sleep time of 0, 15, 30, 45, 60,90, 120, 150,180, 240 and 0 minutes. This will be reflected in the top right corner of the screen. After this step is done, press 【SLEEP】 to view the set sleep. See the illustration in the right.
TROUBLESHOOTING Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms Possible Reasons No picture, no sound, and no indicator light on 1.The power adapter is not plugged in 2.The power is off 1.Plug the power adapter in 2.Turn the power on No picture, no sound, but the yellow light indicator Functions of On Time have been set Press【 Picture and sound with abnormity 1.
SPECIFICATIONS TM150F7U Items Specifications Size (diagonal) Brightness:250cd/m 15.0 inch 2 Contrast:400:1 Angle of View:1200(H)/1000(V) Speed Response:16ms LCD panel items Lamp Life:50,000 Hours Recommended Resolution 1024X768 Pixel Pitch 0.297mm(H) X0.297mm (V) Number of Dots 1024XRGBX768 Viewable Area 304.1mm(H) x228.1mm (V) Color Display 16.
SPECIFICATIONS W170F7U Items Specifications Size (diagonal) 17.1 inch High Brightness High Contrast Wide Angle of View High Speed Response LCD Panel Long Lamp Life Recommended Resolution 1280X768 Pixel Pitch 0.291mm(H) X0.291mm (V) Number of Dots 1280XRGBX768 Viewable Area 372.48mm(H) x223.488mm (V) Colour Display 16.
SPECIFICATIONS TM201F7U Items Specifications Size (diagonal) 20.1 inch High Brightness High Contrast Wide Angle of View High Speed Response LCD Panel Long Lamp Life Recommended Resolution 640X480 Pixel Pitch 0.6375mm(H) X0.6375mm (V) Number of Dots 640XRGBX480 Viewable Area 408mm(H) x306mm (V) Colour Display 16.7million Colour System NTSC Sound System M PC Qualified Input Format Audio Output Consumption VGA/SVGA 480i, 480P, 576i, 576P, 720P, 1080i, 1080P(50Hz、 60Hz) 2x2.
All the features and specifications are subject to change without notice for improvement. TM150F7U /TM201F7U JUJ6.491.
