LCD COLOR TELEVISION W270F8E W320F8E W370F8E OPERATION MANUAL Please read this manual carefully before operation.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................................................................ 1 USING THE REMOTE CONTROL ..................................................................................... 3 BATTERIES FOR REMOTE CONTROL ............................................................................ 3 PACKING LIST .............................................................................................................................. 4 GENERAL INFORMATION............
All the features and specifications are subject to change without notice for improvement. W320F8E/W370F8E JUJ6.491.
Important Safety Instructions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger. 13.
Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 23.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
If the remote control is not used for an extended period of time, remove the batteries from the remote control. PACKING LIST LCD TV 1 Operation Manual 1 Infrared Remote Control 1 AC Power Cable 1 AAA Batteries 2 Warranty Card 1 1 Audio Convert Cable Note: Please keep the wrapping box and the padding well for future convenient use when you convey them.
Full-light display Picture amending display function Fleshtone enhancement and improvement Super definition display panel 3:2, 2:2 Pull Down TV program scan function Timer function Automatically on/off in certain preset time Blue background with noise reduction In TV,AV, AV1,AV2 and YPbPr modes, screen displays soft blue background if there is no signal input Auto Off if no signal input In TV mode, the LCD TV will automatically power off within 15 minutes and en
BRIEF INTRODUCTION Front Panel W320F8E Infrared Receiver Indicator Light AC Power Switch W370F8E Infrared Receiver Indicator Light AC Power Switch Panel Buttons W320F8E W370F8E PAGE 6
Button Description To switch between TV,AV, AV1, AV2, YPbPr, PC, and DVI modes The same function to【AV】on remote control To enter or exit the OSD (On-Screen Display) menu To browse the OSD menu To decrease the sound volume To adjust functions in menu operation To increase the sound volume To adjust functions in menu operation 【TV/AV】 【MENU】 【VOL-】 【VOL+】 【CH-】 1. In TV mode, decrease channel number 2. To select functions in menu operation 【CH+】 1. In TV mode, increase channel number 2.
Enlarged View of Signal Input/Output Terminals 1: Enlarged View of Signal Input/Output Terminals 2: Enlarged View of Signal Input/Output Terminals 3: Items Description AV IN Video or Y/C input. When they are input respectively, sign of AV(Video) or AV (Y/C) appears on the screen accordingly HEADPHONE OUTPUT AV(1) Headphone audio signal output Video or RGB signal input TV-Video signal output AV(2) Video or Y/C signal input.
REMOTE CONTROL Overview of the Remote Control Picture Size Mode Selection Power On/Off Recall Digit Number Signal Source Selection Invalid Button Sound Mode Selection Picture Mode Selection Invalid Button On-screen Menu Channel Up Enter Volume Down Volume Up Channel Down Color Status Display Sleep Timer Picture still Sound Mute Subcode East/West Index/Nicam Cancel Text Size Reveal/Conceal Hold PIP Location PIP Source Selection PIP Channel Up PIP Swap PIP Still PIP Size PIP On/Off PIP C
TV Functions Except Teletext Functions 1 . RECALL : Return to last viewed program 2 . ZOOM : Adjust displayable aspect ratio 3 . POWER ON/OFF : Switch on or off TV set 4 . 0-9 Number Keys : Key in the alphanumeric digits to switch to the designated channel directly 5 . AV : Toggle between different signal sources available 6 . MENU : To go to the On Screen Display(OSD) menus 7 . P. MODE : Select different mode of picture setting 8 . S. MODE : Select different mode of sound setting 9 .
23 . PIP SWAP : Interchange main picture displayed with Sub-Picture source 24 . PIP STILL : Freeze or activate sub-picture 25 . PIP SIZE : Adjust size or Mode of Sub-Picture 26 . PIP CHANNEL DOWN : Switch to the previous channel of Sub-Picture 27 . PIP ON/OFF : Turn on or off Sub-Picture function Teletext Functions 1. 0-9 Channel Keys : Key in the alphanumeric digits to go to the designated page directly 2. P+ Keys : Press【P+】to scroll to the next page 3.
INSTALLATION 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV input terminal. 3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV with AV connecter. Ensure that every AV signal cable is connected correctly to the corresponding port. 4.
MENU OPERATION 1. Use the On Screen Display MENU to regulate the picture’s quality. 2. Different operating languages are available. 3. The display time for the menu ranges from 3~60 seconds. This can be adjusted in the General Setting menu. 4. Use the Panel buttons or the Remote Control to operate the OSD MENU. FUNCTION INTRODUCTION Using the Channel Setting Menu (For TV Use Only) 1) Press【MENU】and then use【V+】/【V-】 to select the Channel Setting menu in TV mode. 2) Use 【P+】/【P-】to select the desired field.
Manual Search In TV mode, select Manual Search option and press 【OK】/【V+】to enter into Manual Search . Use 【V+】/【V-】to search programs within high or low frequency. After searching, the TV will automatically store receivable channels and return to the menu. Fine When the picture and sound of a channel are not satisfactory after Auto Search or Manual Search, Fine function can be used to adjust the pictures and sound. 1.In TV mode, select Fine and press【OK】/【V+】 to enter the Fine tuning mode. 2.
Full Light Watch The TV adjusts the brightness of the LCD TV according to the environment. Picture Mode Four modes to be selected: Standard, Mild, Bright, User. Brightness To adjust the picture’s brightness. Contrast To adjust the picture’s contrast. Saturation To adjust the picture’s saturation. Sharpness To adjust the picture’s definition. Hue To adjust the picture’s tint. (For NTSC signal only) Color Temp Four modes can be chosen: Warm, Normal, Cool, and User.
MTS To select the desired mode of MTS (for U.S.A Users only) BBE To turn BBE On or Off TruSurround To turn TruSurround On or Off Volume To increase or decrease the volume Using the General Setting Menu 1) Press【MENU】and then use【V+】/【V-】to select the General Setting menu. 2) Press【P+】/【P-】to select the desired field.
Sleep Time To set the sleep time of the TV. This can be set with the remote control 【SLEEP】button. Current Time Press【OK】/【V+】to enter the mode. Press【V+】/【V-】to set the Minute/Hour and press 【P+】/【P-】to adjust the time value. On Time Press【V+】/【V-】to set the Minute/Hour and press 【P+】/【P-】to adjust the time value. On Channel To set the default channel when turning on the TV. Press【V+】/【V-】to change the channel number. Off Time Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value.
to select the channel and press【V+】/【V-】to set lock/unlock. A prompt appears when a locked channel is switched. The password needs to be entered to watch the program. In Lock All mode, press【OK】/【V+】to lock all of the programs. In Clear All mode, press【OK】/【V+】to unlock all of the programs. Note: In child lock menu operation, each function cannot be activated until the correct password is entered. If the password is forgotten, the default password of “1601” is still valid.
Channel Selection Press 【CH+】 / 【CH-】 on the panel or 【P+】 /【P-】on the remote control to change the channels. If a channel number is in SKIP ON mode, the next channel will be displayed. A maximum of three channel numbers can be input at one time on the remote control. Volume Control Press 【V+】/【V-】 to increase or decrease the volume. The range is 0-100. The Volume menu will be automatically off if there is no operation in 4 seconds. Mute Press the【MUTE】on the remote control to turn On/Off the MUTE mode.
Recall In TV mode, press【RECALL】to return the previous channel or the previous signal source. Zoom Mode Switch between Fill screen, 4:3, Wide, Cinema and Subtitle. Still Press【STILL】to freeze or activate the current image. PIP/POP/PBP Function to enter into or exit from the sub-picture mode. Press 1. Press to choose sub-picture signal source of TV, AV, AV1, AV2, YPbPr, PC and DVI. 2. Press to choose the sub-picture mode of PIP, PBP and POP.
TROUBLESHOOTING Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms Possible Reasons No picture, no sound, and no indicator light on 1.The power cord is not plugged in 2.The power is off No picture, no sound, but the green light indicator 1.Contrast, sharpness, color and volume are all in the minimum value or TV is in mute mode 2.PC has no signal in PC mode 3.The signal cord is not correctly connected Correction 1.
SPECIFICATIONS Model: W260F8E Items Specifications Color System PAL, SECAM Sound System D/K, I, B/G, L PC, DVI Qualified Input Format VGA/SVGA/XGA/WXGA 60Hz YPbPr Input Format 480i, 480P, 576i, 576P, 720P, 1080i, 1080P Audio Output Consumption 2x5W AV (Video,Y/C) Input One Way AV1 (TV-Video)Output One Way Headphone Output One Way AV1 (Video, RGB) Input One Way AV2(Video, Y/C) Input One Way AV2(TV-Video,) Output One Way YPbPr Input One Way PC Input One Way DVI Input One Way Volt
SPECIFICATIONS Model: W320F8E Items Specifications Color System PAL, SECAM Sound System D/K, I, B/G, L PC, DVI Qualified Input Format VGA/SVGA/XGA/WXGA 60Hz YPbPr Input Format 480i, 480P, 576i, 576P, 720P, 1080i, 1080P Audio Output Consumption 2x5W AV (Video,Y/C) Input One Way AV1 (TV-Video)Output One Way Headphone Output One Way AV1 (Video, RGB) Input One Way AV2(Video, Y/C) Input One Way AV2(TV-Video,) Output One Way YPbPr Input One Way PC Input One Way DVI Input One Way Volt
SPECIFICATIONS Model: W370F8E Items Color System Specifications PAL, SECAM Sound System D/K, I, B/G, L PC, DVI Qualified Input Format VGA/SVGA/XGA/WXGA 60Hz YPbPr Input Format 480i, 480P, 576i, 576P, 720P, 1080i, 1080P Audio Output Consumption 2x5W AV (Video,Y/C) Input One Way AV1 (TV-Video)Output One Way Headphone Output One Way AV1 (Video, RGB) Input One Way AV2(Video, Y/C) Input One Way AV2(TV-Video,) Output One Way YPbPr Input One Way PC Input One Way DVI Input One Way Voltag
