LCD COLOR TELEVISION W260F8U W320F8U W370F8U OPERATION MANUAL Please read this manual carefully before operation.
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................................................................ 1 USING THE REMOTE CONTROL ..................................................................................... 3 BATTERIES FOR REMOTE CONTROL ............................................................................ 3 PACKING LIST .............................................................................................................................. 4 GENERAL INFORMATION............
All the features and specifications are subject to change without notice for improvement. W260F8U/W320F8U/W370F8U JUJ6.491.
W260F8U/W320F8U/W370F8U Important Safety Instructions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
W260F8U/W320F8U/W370F8U f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in the product indicates that the product needs servicing. 12. Replacement parts---In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as the original parts.
W260F8U/W320F8U/W370F8U Therefore, it can break when the product is dropped or impacted upon by other objects. Be careful not to be injured by broken glass pieces in case the LCD panel breaks. 23.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.
W260F8U/W320F8U/W370F8U If the remote control is not used for an extended period of time, remove the batteries from the remote control. PACKING LIST LCD TV 1 Operation Manual 1 Infrared Remote Control 1 AC Power Cable 1 AAA Batteries 2 Note: Please keep the wrapping box and the padding well for future convenient use when you convey them.
W260F8U/W320F8U/W370F8U Trusurround sound technology Full-light display Picture amending display function Fleshtone enhancement and improvement Super definition display panel 3:2, 2:2 Pull Down TV program scan function Timer function Automatically off at certain preset time, and enters into the standby mode Blue background with noise reduction In TV, AV1,AV2 and YPbPr modes, screen displays soft blue background if there is no signal input Auto Off if no signal input I
W260F8U/W320F8U/W370F8U W260F8U/W320F8U Infrared Receiver Indicator Light W370F8U Infrared Receiver Indicator Light Panel Buttons W260F8U/W320F8U W370F8U Button 【TV/AV】 【MENU】 Description To switch among TV, AV1, AV2, YPbPr, PC, and DVI modes. The same function to【AV】 on remote control. To enter or exit from the OSD (On-Screen Display) menu.
W260F8U/W320F8U/W370F8U 【VOL-】 To decrease the sound volume. Adjust functions in menu operation. 【VOL+】 To increase the sound volume. Adjust functions in menu operation. 【CH-】 1.To decrease channel number in TV mode 2. to select functions in menu operation. 1.To increase channel number in TV mode 2.to select functions in menu operation. To turn the LCD TV on or enter into STANDBY. 【CH+】 【 】 The same function to【 】on remote control. Note: In this operation manual, 【】symbol means Button.
W260F8U/W320F8U/W370F8U Enlarged View of Signal Input/Output Terminals 2: Enlarged View of Signal Input/Output Terminals 3: Items AV IN (1) HEADPHONE OUT Description One-way AV input port; one-way S-Video input terminal; S-Video 1 is the first if VIDEO, S-Video 1 connect at one time, and the screen displays AV1 (Y/C) Headphone audio signal output DVI IN One-way AV input port; one-way S-Video input terminal; S-Video 2 is the first if VIDEO, S-Video 2 connect at one time, and the screen displays AV2 (Y/
W260F8U/W320F8U/W370F8U REMOTE CONTROL Screen Size Mode Selection Power On/Off Recall Channel Number Signal Source Selection Invalid Button Picture Mode Selection Sound Mode Selection On-screen Display Menu Invalid Button Channel Up Enter Volume Up Volume Down Channel Down Invalid Buttons Display Sleep Timer Picture Still Sound Mute Scan MTS Invalid Button Favorite Invalid Buttons PIP Channel Up Location PIP Swap PIP Source Selection PIP Still PIP On/Off PIP Size PIP Channel Down
W260F8U/W320F8U/W370F8U TV Functions Except Teletext Functions 1 . RECALL : Return to last viewed program 2 . ZOOM : Adjust displayable aspect ratio 3 . POWER ON/OFF : Switch on or off TV set 4 . 0-9 Number Keys : Key in the alphanumeric digits to switch to the designated channel directly 5 . AV : Toggle between different signal sources available 6 . MENU : To go to the On Screen Display(OSD) menus 7 . P MODE : Select different mode of picture setting 8 . S MODE : Select different mode of sound setting 9 .
W260F8U/W320F8U/W370F8U INSTALLATION 1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location. 2. Connect the output terminal of RF cable to the corresponding TV input terminal. 3. Connect AV signal output (DVD or other equipments) to AV input terminal of the LCD TV with AV connecter. Ensure that every AV signal cable is connected correctly to the corresponding port. 4.
W260F8U/W320F8U/W370F8U MENU OPERATION 1. Use the On Screen Display MENU to adjust the picture’s quality. 2. multiple operating languages are available. 3. The display time for the menu ranges from 3~60 seconds. This can be adjusted in the General Setting menu. 4. Use the Panel buttons or the Remote Control to operate the MENU. FUNCTION INTRODUCTION Using the Channel Setting Menu (For TV use Only) 1) Press【MENU】and then use【V+】/【V-】 to select the Channel Setting menu in TV mode.
W260F8U/W320F8U/W370F8U Fine (This option would be in gray ,which means invalid to operate in the current mode) When the picture and sound of a channel are not satisfactory after Auto Search or Manual Search, please use the Fine function. Note: During auto search, manual search, and fine tune operation, you will be asked to enter the password if any program is locked. Channel Table Two kinds of program list, Air & Cable for you to choose, 2~69 for Air list, and 1~125 for Cable list. (for U.S.
W260F8U/W320F8U/W370F8U Color Temp Four modes can be chosen: Warm, Normal, Cool, and User. (User mode is valid for PC & DVI only) Fleshtone To adjust the human skin tones Using the Audio Setting Menu 1) Press【MENU】and then use【V+】/【V-】to select the Audio Setting menu. 2) Press【P+】/【P-】to make the desired adjustment.
W260F8U/W320F8U/W370F8U Language To select the different languages displayed OSD H Position To adjust the OSD position horizontally OSD V Position To adjust the OSD position vertically OSD Timeout To adjust the length of time the OSD to be displayed on the screen without any commands Blue Screen To set the Blue Screen on/off when there is no signal input in TV, AV, AV1, AV2, YPbPr modes Close Caption Only valid for U.S.
W260F8U/W320F8U/W370F8U Off Time Press【V+】/【V-】to set the Minute/Hour and press【P+】/【P-】to adjust the time value. Timer Mode Set the clock time mode. Using the Vchip Setting 1) Press 【MENU】and then use 【V+】/【V-】to select the Vchip Setting menu. 2) Press【P+】/【P-】to make the desired adjustment. When Enter VChip Menu, Input Correct Password. The initial password is “1601”,you can set or change your password by “Change Password” Item, but the password “1601” is always valid.
W260F8U/W320F8U/W370F8U TV Rating Block programs by their rating, content or both. 1)Press【P+】/【P-】to select these options. 2)Press【OK】to block or unblock. Using the PC Setting menu (for PC mode only) 1) Press【MENU】and then use【V+】/【V-】 to select the PC Setting menu. 2) Press【P+】/【P-】to make the desired adjustment. Five modes for you to choose: Auto Tracking, Clock, Phase, H position, V position.
W260F8U/W320F8U/W370F8U Note: The biggest number you can input is 125 or 69 and use number buttons to input your desired channel number. During this input operation you can change to the corresponding channel directly with pressing 【OK】, and press【MENU】to cancel. Volume Control Press 【V+】/【V-】 to increase or decrease the volume continuously when the main menu is not displayed on the screen. The range is 0-100. The Volume menu will automatically be off if there is no operation about 4 seconds.
W260F8U/W320F8U/W370F8U Scaler Mode Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes. STILL Press【STILL】to freeze or unfreeze the current image. Program Scan Press 【SCAN】to browse TV programs, this function is the same as “Auto scan” in Channel Setting Menu Favorite channel Press 【FAVOR】to select or set your favorite channels as show in the right picture You can press【P+】 【P-】 / to select the desired Item. Mode To select Mode Item, press 【V+】/【V-】 to select Auto or Manual Mode.
W260F8U/W320F8U/W370F8U Switches of the sub-picture’s channel can be realized by pressing 【CH+】/【CH-】in TV mode. The sub-picture can enter into TV mode directly by pressing【CH+】/【CH-】in other modes.
W260F8U/W320F8U/W370F8U TROUBLESHOOTING Before calling a technician, please check the following table to see if the below mentioned symptoms can be diagnosed and fixed. Symptoms No picture, no sound, and no indicator light on No picture, no sound, but the green light indicator Possible Reasons 1.The power cord is not plugged in 2.The power is off 1.Contrast, sharpness, color and volume are all in the minimum value or TV is in mute mode 2.PC has no signal in PC mode 3.
W260F8U/W320F8U/W370F8U SPECIFICATIONS Model: W260F8U Items LCD panel items Specifications Size (diagonal) 26 inch Recommended Resolution 1280X768 Dot Pitch 0.4425mm(H) X0.1475mm (V) Number of Dots 1280XRGBX768 Viewable Area 566.4mm(H) x339.84mm (V) Color Display 16.
W260F8U/W320F8U/W370F8U SPECIFICATIONS Model: W320F8U Items LCD panel items Specifications Size (diagonal) 31.56 inch Resolution 1366X768 Dot Pitch 0.1703mm(H) X0.5108mm (V) Number of Dots 1366XRGBX768 Viewable Area 697.685mm(H) x392.256mm (V) Color Display 16.
W260F8U/W320F8U/W370F8U SPECIFICATIONS Model: W370F8U Items LCD panel items Specifications Size (diagonal) 37.02 inch Resolution 1366X768 Dot Pitch 0.200mm(H) X0.600mm (V) Number of Dots 1366XRGBX768 Viewable Area 819.6mm(H) x460.8mm (V) Color Display 16.