User's Manual

 Base Station-EA1000-Fast User Manual


www.sunvote.com.cn+86‐731‐851239991/2
BaseStation‐EA1000‐FastUserManual


INDICATELED
(1)Connectionstatuslightflashesslowly:connectbasestationtocomputer
successfully.
(2)Connectionstatuslightflashesfast:connectbasestationandapplicationsoftware
successfully.
(3)Workingstatuslightflashes: basestationhasreceivedkeypaddatasuccessfully(The
lightflashesquicklyinnon‐responsestate,representinganotherbasestationisusing
thesamechanneliden
tity).
BASESTATION
CONNECTION

· ConnectthebasestationwithPCUSBport,theStatusLEDwillflasheveryhalf
secondifconnectionissuccessful.
· TheStatusLEDwillflashquicklyafterthesoftwareandbasestationcommunicate
normally.
· Initialinstallation,PCwillautomaticallyremindthathavefoundnewdeviceand
installthedriveautomatically.

RADIO
CHANNELSET

· Afterlogginginapplicationsoftware,choosethenewchannelinthe“channel” of
“base station set”, then click “set”.
· Whenusingthemultiplebasestationsolution,thefrequencychannelofeachbase
stationshouldbedifferent,andit’s better not to set the neighboring channel
· Onlywhenfrequencychannelisinterferedorcommunicationisnotgood,thenyou
needtoconsiderchangingandresettingthechannel,otherwiseyoudonotneedtochange
it.

BASE STATION
TEST

After connetion is ok, then start keypads testing.