User's Manual

4.1.1-System Settings ：Keypad Match-Match Mode
【 Why to Match】 Keypad match is to create communication between keypads and base station, and make sure your system is
isolated from other similar systems. Match mode is set by default from factory.
【 How to Match】 Please run SunVote ARS Tool Kit，go to Keypad Match and click “Start” after the base is connected.
Press 【.】and 【-】 at the
same time for 3 seconds
Keypad shows“-Channel-” and
“OK”, the buzzer beeps 3 times
shortly, to indicate successful
match
If failed, keypad will return to the
last matched channel.
For end-user, the keypads and
base station are matched before
delivery.
List the information of matched keypads