User's Manual

ManualsBrandsChangzhou Kaidi Electrical ManualsElectronicsHandset

1/5

UserManual

一、Systemconnectiondiagram

二、ProductList

Name(Code) model Quantity Remarks

controlbox

KDDY036

Switchingpowersupply KDDY01B 1 Optional

Putter2 KDYJT014‐025 1

Putter1 KDYJT014‐026 1

Massagemotor KDZYD028 1

Wirelesshandcontroller KDH143(433M) 1

Lightstrip DY056 1

三、Performanceparameter

1. Performanceparametersofswitchingpowersupply:

Inputvoltage

AC100～240V50/60Hz

Ratedoutput

29VDC/ 2A

Maximumoutput

29VDC/4A（Press10%workingsystem,upto2

minutesofcontinuousoperation,stopfor18

minutes）

2. Controlboxperformanceparameters

Inputvoltage 29VDC

Faderchanneloutput

29VDC/4A（Press10%workingsystem,upto2

minutesofcontinuousoperation,stopfor18

minutes）

Massagemotorchanneloutput 29VDC/1A

Lampwithchanneloutput 12VDC/1A

FCC ID: 2AOTUKDH143

FCC ID: 2AOTUKDDY036

Summary of content (4 pages)

PAGE 1
User Manual 一、System connection diagram FCC ID: 2AOTUKDDY036 FCC ID: 2AOTUKDH143 二、Product List Name (Code) model Quantity control box KDDY036 1 Switching power supply KDDY01B 1 Putter 2 KDYJT014‐025 1 Putter 1 KDYJT014‐026 1 Massage motor KDZYD028 1 Wireless hand controller KDH143(433M) 1 Light strip DY056 1 Remarks Optional 三、Performance parameter 1.
PAGE 2
3. Wireless remote controller performance parameters Operating Voltage 4.5V Power supply 3 AAA batteries (KDH143) stand‐by current <10uA 4. Pusher performance parameters: parameter name Putter 1 Putter 2 Voltage and current 29VDC/ 4A （According to the 10% working system, the maximum continuous work for 2 minutes and 18 minutes stop） No‐load speed 4‐6mm 4‐6mm Installation dimensions 300mm 330 mm stroke 60 mm 100 mm Maximum thrust 6000N 6000N 5.
PAGE 3
五、Key function description 1、Wireless hand control panel diagram 2、Key function table of hand controller (KDH143): Key symbol Key Function Press and hold the push rod 2 extended, stop when released Press and hold the push rod 2 to retract, release to stop Press and hold the push rod 1 extended, stop when released Press and hold the push rod 1 retracted, stop when released Press and release, push rod 1 and push rod 2 are fully retracted to stop, press any key to stop during operation Press and release, pus
PAGE 4
Press the SET button, the backlight of the related buttons in the fader control area turns from off to steady on, you can press the memory position button 1 or 2, the memory button will memorize the current position of the fader 1 and the fader 2 Becomes steady light.