User's Manual

Adjustment of Throttle Stick (Ratchet System)

You can choose either airplane ratchet system or helicopter-touch.

Before Use

Open the dust protection cap on the back of

the transmitter that is covering the hole for

throttle stick adjustment.

Use the attached 1.5mm hexagonal wrench

(inside stylus) to turn the adjustment screw and

set it as you prefer. Turning the screw

clockwise increases the tension.

For airplanes: Adjust the screw on the left.

For helicopters: Adjust the screw on the right.

In changing the setting from airplane to helicopter (or

heli to airplane);

1. Turn the screw counter-clockwise until the

throttle stick moves freely, and turn the screw

clockwise to adjust it to the tension you prefer.