Installation Guide
HDTV SIGNAL AMPLIFIERS
34 series
4
Instructions
1. Install type F-male connectorized input coaxial cable
from the cable operator or from the antenna to the “RF
IN” port on the amplier.
2. Install type F-male connectorized RF coaxial cable from
the “RF OUT” port(s) to the television set, set top box, or
cable modem.
3. Verify AC voltage rating of power source conforms with
AC/DC adapter.
4. Connect F-male connectorized RF coaxial cable
between “PWR IN” port on the drop amplier and
power adapter F-type connection.
5. Connect the power adapter to AC voltage source.
Installation is complete.
From
Drop
To TV
AC
Fig 1