User Guide

UH F P er f o r ma n c e
antenna series


 Assemble mast bolts with hex ange nut loose enough
to allow movement in curved slot without damaging
the painted surface (on each side) . Once
proper alignment is determined, tighten ange nuts.
 With the provided lag bolts, secure the DBS mount
so that the antenna can be pointed towards the TV
transmitters with clearance from obstructions to allow
for adjusting. Secure at least 2 lag bolts into a stud.
 Mount the antenna per the 4220HD and 4221HD
instructions on .
 Tighten all loose hardware.
 Use proper hardware for brick or masonry
installations.
Use sealant for roof mounts to prevent leaks.
Roof Eave Wall
Hex Flange Nut
Hex Flange Nut
1/4 x 1/2
Carriage Bolts
(2) Nests
(4) Split
Lock Washers
(4) Hex Nuts
(2) U-Bolts
Fig A
Hex Flange Nut
Hex Flange Nut
1/4 x 1/2
carriage bolts