Specifications

Detail

5 Errors and warnings

Errors and warnings are shown in the display accompanied by the sounds shown in the

figure below:

1 sec.

8 sec.

WARNING

& INFO

TONE SIGNAL

ERRORS

39718

In case of an error or warning message it is always possible to mute the alarm sound.

Press in order to finish the current radiotelephony call. This procedure will not affect

the actual read-out and accept procedure for errors and warnings.

Error and warning messages are shown in the information display. Examples of a warning

can be a reminder to enter position manually each 4 hours, or that the GPS signal suddenly

is missing.

5.1 System event logging

Errors received as pop-up and information windows shall be logged in the event logging

system for later read out. The error logs are accessed from menu (4.6.3.1).

From menu 4.6.3.2 at least the following statistics are available:

• On time (<xxxx>d <yy>h <zz>m)

• Number of power failures

• Number of missing GPS situations

• Number of Tx activations

• Number of transmitted DSC calls

The information is read only on the front panel. Counters can be reset only from the service

interface

5.2 Troubleshooting

If you doubt that your VHF system works properly, it is of great importance that you find the

reason and assure that the equipment is properly serviced if any of the devices are failing.

You should contact your authorized dealer for tecnical support of your equipment. But, before

you do that you can go through a list of actions to fix the problem by yourself and save time.

0605