All other brand or product names which may be mentioned in this manual are trademarks or registered trademarks of their respective companies or organizations. The information furnished in this manual is for informational use only and is subject to change without notice. Please check www.vari-lite.com for latest version. Philips Vari-Lite assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.
FOREWORD How To Obtain Warranty Service A copy of the Philips Vari-Lite Limited Warranty was included in the shipping package for this VARI❋LITE product. To obtain warranty service, please contact customer service at 1-877-VARI-LITE (1-877-827-4548), +1-214-647-7880, or entertainment.service@philips.com and request a Return Material Authorization (RMA) for warranty service.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Compliance Notice FCC This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment.
FOREWORD Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the products described herein. Heed all cautions and warnings during installation and use of this product. Safety symbols used throughout this manual are as follows: CAUTION advising of potential damage to product. WARNING advising of potential injury or death to persons.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE EXPOSURE TO UV RADIATION 1. Many VARI❋LITE luminaires use a lamp that produces UV radiation. DO NOT look directly at lamp. 2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired. For example, by cracks or deep scratches.
FOREWORD Sicherheitshinweise Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem Handbuch und dem beiliegenden Informationsmaterial zu lesen, bevor Sie die hierin beschriebenen Produkte installieren bzw. bedienen. Halten Sie bei der Installation und dem Einsatz dieses Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein. Folgende Sicherheitssymbole werden in diesem Handbuch verwendet: VORSICHT - weist auf möglichen Produktschaden hin.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL WARNUNG: HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG 1. Viele VARI❋LITE -Scheinwerfer verwenden die Lampentyp, der UV-Strahlen abgibt. SCHAUEN SIE NICHT direkt in die Lampe. 2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch sichtbare Beschädigung (z. B. Sprünge oder Schrammen) eingeschränkt ist.
FOREWORD Notes de sécurité Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en marche, il est extrêmement important de lire TOUS les renseignements et TOUTES les directives de sécurité contenues dans ce guide ainsi que toute documentation jointe. Tenir compte de tous les avertissements et suivre toutes les précautions pendant l’installation et l’utilisation de cet appareil.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL AVERTISSEMENT: DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE AUX RAYONS UV 1. Plusieurs luminaires VARI❋LITE utilisent une lampe qui produit des rayons UV. NE PAS fixer son regard sur la lampe. 2. L’utilisation des luminaires sans lentille ou blindage pose des risques.
FOREWORD Aviso sobre Seguridad Es muy importante leer TODA la información e instrucciones sobre seguridad que se indica en este manual así como en los documentos adjuntos antes de instalar y operar los productos descritos. Se debe prestar atención a todos los avisos y advertencias durante la instalación y uso de este producto. Los símbolos de seguridad usados en este manual son los siguientes: CUIDADO, indica posibles daños al producto. ADVERTENCIA, indica posibles lesiones o muerte a las personas.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL ADVERTENCIA: INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN EXCESIVA DE RADIACIÓN ULTRA VIOLETA 1. Muchas luminarias VARI❋LITE usan un tipo de lámpara que produce radiación UV. NO mire directamente a la lámpara. 2. Es peligroso operar luminarias sin lentes o protectores. Debe cambiar los protectores, lentes o pantallas ultravioletas si se aprecia que han sido dañadas, y que su efectividad pudiera estar deteriorada.
FOREWORD 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL xii 1 3 Dec emb er 2 012 02 .9 698.
TABLE OF CONTENTS Introduction About This Manual ...................................................................................................... Additional Documentation........................................................................................... Text Conventions ......................................................................................................... Customer Service........................................................................................................
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Gobo Wheels 1, 2, and 3 ..................................................................................... Index and Rotation .............................................................................................. VL3015LT Spot Luminaire Timing VL3015LT Spot Timing Channel Information .......................................................... Updating Software USB Download and Programming .............................................................
INTRODUCTION : ABOUT THIS MANUAL Introduction About This Manual This manual provides necessary information regarding safety, installation, operation and routine maintenance for Philips VARI❋LITE VL3015LT Spot Luminaires. Familiarizing yourself with this information will help you to get the most out of your luminaire. WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.
VARI❋LITE® - VL3015LT SPOT LUMINAIRE USER’S MANUAL Text Conventions The following styles and meanings are used throughout this manual: Style Meaning [Button] Front panel button. Example: Press [Menu]. [Up] / [Down] arrows Press either [Up] or [Down] arrow button at Menu Display. MENU LCD Menu Display read-out. Example: Press [Up] / [Down] arrows until LAMP appears. Customer Service Our Goal At Philips Vari-Lite, we are committed to providing you the highest quality in customer service.
CHAPTER 1. Description This chapter contains descriptions of luminaire features and components, along with a list of accessories which are available. • Features • Components 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Features VL3015LT Spot Standard Features The VL3015LT Spot Luminaire has the following standard features: • 10:1 zoom optics system with 6° to 60° range. • CMY color mixing system. • Two fixed color wheels with five interchangeable color filters each capable of continuous wheel rotation for additional effects. • Variable CTO color temperature correction wheel. • Mechanical iris provides continuous beam size control.
DESCRIPTION : COMPONENTS 1 Components Included Items The following illustration shows all items included with the luminaire: VL3015LT Spot Luminaire Documentation CD ROM Product Registration Product Support Sheet VL3015LT Spot Luminaire Unpack & Quick Start Guide Warranty Card 1500 Watt Short Arc Double-Ended Lamp* Neutrik PowerCon® AC Input Connector Note: *DO NOT handle arc lamp with bare hands. Wear cotton gloves. Keep lamp dirt and grease free. Mounting Brackets Figure 1-1: Included Items 02.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Replacement Items/Accessories The following optional and/or replacement items can be ordered directly from your Authorized Philips Vari-Lite Dealer. (Please order by Philips Vari-Lite part number.) Philips Vari-Lite Part Number Accessory Description 22.9620.0194 Safety Cable Assembly 22.9678.2254 VARI❋LITE Luminaire Cover 21.9698.9610 VL3015LT Spot Followspot Handle (1 each) 25.9661.0057 DMX Termination Connector Assembly 28.8500.
1 DESCRIPTION : COMPONENTS Luminaire Overview The following illustration shows the external luminaire components and controls. Mounting Brackets Note: Truss hooks, clamps, etc. are sold separately. Upper Enclosure Assembly Houses power supply, ballast, and display board. Input Panel Provides DMX In and Thru, and AC Power connections. (see detail below) Backcap Assembly Provides access to lamp for replacement and provides controls for beam adjustment. Yoke Assembly Houses Master Control Board (MCB).
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Notes 8 1 3 Dec emb er 2 012 02 .9 698.
CHAPTER 2. Installation This chapter contains instructions for installation of the luminaire. It includes connecting power and data, along with instructions for powering up the luminaire for the first time and addressing it within your system. • Special Warnings • Power and Data Cabling Requirements • Installation Procedures • Powering Up • Addressing 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Special Warnings Exceptional Safety Information for the VL3015LT Spot Luminaire The light intensity and power density of the VL3015LT Spot Luminaire exceeds that of other fixtures typically used in this application. The warnings and cautions that follow are critically important to the safe operation of this fixture. This product is for commercial use only by trained professionals only.
INSTALLATION : POWER AND DATA CABLING REQUIREMENTS 2 Power and Data Cabling Requirements Power The luminaire requires standard AC power distribution from 200-240 VAC, 50/60 Hz. Current required is up to 12 Amps depending on the AC supply voltage and product model. Note: The mating Neutrik PowerCon connector is supplied, however, you will need to purchase or construct a cable appropriate for your application.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL For single-phase power at 200-240 volts RMS: Connection Pin AC Neutral X AC Line Y Ground (Earth) G X G Y For three-phase power at 208 volts RMS: Connection Pin Phase 1 X Phase 2 Y Ground (Earth) G X G Y WARNING: It is not recommended to power any VARI❋LITE luminaire from a dimmer - even in 'NONDIM' mode. Dimmer and non-dim modules are not suitable sources of power because their output modifies the AC wave form.
2 INSTALLATION : POWER AND DATA CABLING REQUIREMENTS Data Cables The VL3015LT Spot Luminaire is equipped with two, 5-pin XLR connectors for DATA IN and DATA THRU (out) applications. DATA IN requires a 5-pin, female XLR connector and DATA THRU requires a 5-pin, male XLR connector. When purchasing or constructing data cables, it is important that not only the correct cable type be used, but also quality cable to ensure a reliable DMX512 system.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Recommended Cable Types/Manufacturers These are only a few of the suitable cable types. Any quality EIA485, twisted pair, 120 ohm, shielded cable will also work.
INSTALLATION : INSTALLATION PROCEDURES 2 Installation Procedures Hanging the Luminaire The VL3015LT Spot Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this moving luminaire. Two mounting bracket assemblies (provided) are used to attach truss hooks or other mounting hardware as required. Many compatible truss hooks are available from different manufacturers for your particular needs.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the luminaire. Truss Hook Bracket* Locking Mechanism Keyed Hole Press up when installing or releasing Raised Mounting Button *IMPORTANT! Face brackets in same direction for all configurations. Once fitted over buttons, slide forward to lock in place Locked Figure 2-4: Installing Brackets on Luminaire Enclosure 16 1 3 Dec emb er 2 012 02 .9 698.
INSTALLATION : INSTALLATION PROCEDURES 2 Installing in Truss: Step 1. Using two people, lift luminaire into mounting position. Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g. wing bolt) is properly tightened and that luminaire is fully supported. Step 3. Attach safety cable (as required) as follows: a. Connect one end of cable to luminaire handle. b. Loop at least once around truss/pipe and attach other end of cable to other handle. Step 4.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Floor Mounting the Luminaire The luminaire enclosure is sufficient to stabilize the luminaire in a floor installation, provided that the mounting surface is flat and sturdy. Luminaire Enclosure WARNING: Light Beam Projects Intense Heat. Do not illuminate objects within 4.0 m (13.2 feet) of the VL3015LT Spot Luminaire. Objects within this range can scorch, melt, or ignite from the heat projected by the light beam.
INSTALLATION : POWERING UP 2 Powering Up Power Up and Configuration Procedure Since Lamp On is the default state, the lamp will strike when the luminaire is powered up for the first time when AC input power cable is connected and power is applied, the luminaire will immediately begin a calibration sequence that steps it through pan and tilt movements. The internal color, gobo, and beam mechanisms will also move through a full range of motion.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Addressing Program Starting Address The address setting for DMX console controlled systems is entered using the Menu Display (refer to “Menu Operation” on page 46). The luminaire retains the DMX address even if power is removed. Note: Refer to your console operating instructions for specific information regarding its addressing requirements. Program a DMX starting address: Step 1. Press [Menu]. Step 2. Press [Up] / [Down] arrows until Address appears.
CHAPTER 3. Operation This chapter contains instructions for operating the luminaire using DMX control and for updating the internal software. • VL3015LT Spot DMX Channels • VL3015LT Spot DMX Mapping • VL3015LT Spot Luminaire Timing • Updating Software 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL VL3015LT Spot DMX Channels VL3015LT Spot Channel Mapping These tables assume a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence. Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters Range (DMX) Range (%) Default Value 1 Intensity 0 - 255 0 - 100% 0 0 - 65535 0 - 100% 32767 16 bit control of Pan 540°of movement.
OPERATION : VL3015LT SPOT DMX CHANNELS 3 Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters Range (DMX) Range (%) Default Value Description Controls Rotating Gobo Wheel 1 using the following DMX values. Half gobo positioning not possible.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 1: VL3015LT Spot DMX Channel Mapping DMX Channel Parameters Range (DMX) Range (%) Default Value 27 Prism 0 - 255 0 - 100% 0 28 Prism Rt - High 29 Prism Rt - Low 0 - 65535 0 - 100% 32767 Description Inserts Prism into beam for prism effects. Open (Out of Beam) DMX = 0 - 3 Prism Index DMX = 3 - 127 Prism Rotate DMX = 128 - 255 16 bit control of Prism Index and Rotation in either direction. Controls strobe operations as follows . . .
OPERATION : VL3015LT SPOT DMX CHANNELS 3 change as a snap. A zero value will give the fastest move but without any smoothing, this can look steppy in console-timed moves. • To use a timing channel instead of console timing it is necessary to set the timing channel to the desired value and set cue and/or parameter time to zero. A combination of time controls can produce unexpected results. Refer to “VL3015LT Spot Timing Channel Information” on page 34 for more information.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL VL3015LT Spot Control Channel Functions Control channel functions allow special actions such as reset, lamp on/off and partial recalibration. These must be executed with zero time transition or with timing disabled. Discrete values must be used; not manual controls such as faders or encoders (see chart below for values). Reset - resets all luminaire mechanisms. Lamp On or Lamp Off - switches lamp on or off.
OPERATION : VL3015LT SPOT DMX MAPPING 3 VL3015LT Spot DMX Mapping VL3015LT Spot Color Control The luminaire’s color system is composed of a CMY color mixing mechanism and two fixed color wheels. The follow sections describe these components. Color Mixing The color mixing mechanism is made up of four graduated color disks: cyan, magenta, yellow and CTO (color temperature orange). These disks provide full-spectrum color crossfades from pastel to saturated color.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 3-3: VL3015LT Spot Fixed Color Wheel 1 Standard Configuration Chart Position Color Filter Part Number 1 Red 41.9686.0490 2 Yellow 41.9686.0491 3 Magenta 41.9686.0492 4 Kelly Green 41.9686.0493 5 Congo Blue 41.9686.0494 Fixed Color Wheel 2 Fixed color wheel 2, like fixed color wheel 1, offers timed changes, half and full frame positions, and various spin rates in either direction. The wheel contains six positions, one being open.
OPERATION : VL3015LT SPOT DMX MAPPING 3 Fixed Color Wheels DMX Map Table 3-5: VL3015LT Spot DMX Map for Fixed Color Wheels 1 and 2 DMX Channel Parameters Range (DMX) Range (%) Default Value Description Controls Fixed color wheel 1. Linear control from 0 to 216. From 217 to 255 will give different speeds of wheel spin. Center color DMX values are denoted by (bold) type face.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Range The Range channel is used to fine tune the focus range of the fixture. If the image can not be made sharp after adjusting the edge and zoom, adjust the range channel to gain sharpness of the image. Table 3-7: VL3015 Spot DMX Map for Strobe DMX Channel 31 Parameters Range Range (DMX) 0 - 255 Range (%) Default Value* 0 - 100% 0 Description Applies different tables to optics mechanism, depending on throw distances.
OPERATION : VL3015LT SPOT DMX MAPPING 3 Table 3-8: VL3015LT Spot Gobo Wheel 1 Standard Configuration Chart Position Gobo Style Part Number 1 Open No Gobo (N/A) 2 Alpha Rays 41.6098.7029 3 Night Sky 41.6098.5011 4 Ray 41.6098.4003 5 Block Break-Up 41.6098.7015 Note: Raw artwork shown for gobos and gags is for reference only.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 3-10: VL3015LT Spot Gobo Wheel 3 Standard Configuration Chart Position Gobo Style Part Number 1 Open No Gobo (N/A) 2 Circle of Ovals 41.6098.6011 3 Multi-Color Circles 41.6098.8801 4 Pebbles 41.6098.7002 5 Uneven Bars 41.6098.4211 Note: Raw artwork shown for gobos and gags is for reference only.
OPERATION : VL3015LT SPOT DMX MAPPING 3 Table 3-11: VL3015LT Spot DMX Map for Gobo Wheel 1, 2 and 3 Controls Rotating Gobo Wheel 2 using the following DMX values. Half gobo positioning not possible.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL VL3015LT Spot Luminaire Timing VL3015LT Spot Timing Channel Information Timing channel control improves the timed moves of certain groups of parameters. We provide up to four timing channels - Focus (pan and tilt), Color Time (color parameters), Beam Time (beam parameters), and Gobo Time (gobo wheel operation).
OPERATION : VL3015LT SPOT LUMINAIRE TIMING 3 A timing value of zero is full speed. A time value of 100% (or DMX 255) enables the associated parameter(s) to follow cue fade time (console time) rather than the timing channel. Note: The particular storing syntax for your console, as well as instructions on how to write part cues, can be found in the operation manual for that console. To use these channels, you must: Step 1. Create the cue, including color, gobo, edge and frost as required. Step 2.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 3-13: Timing Channels Map (Continued) % Value DMX 8 20 4 21 4.2 22 4.4 23 4.6 24 4.8 25 5 26 5.2 27 5.4 28 5.6 29 5.8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 36 = Seconds 30 6 31 6.2 32 6.4 33 6.6 34 6.8 35 7.0 36 7.2 37 7.4 38 7.6 39 7.8 40 8 41 8.2 42 8.4 43 8.6 44 8.8 45 9 46 9.2 47 9.4 48 9.6 49 9.8 50 10 51 10.2 52 10.4 53 10.
OPERATION : VL3015LT SPOT LUMINAIRE TIMING 3 Table 3-13: Timing Channels Map (Continued) % Value DMX = Seconds 62 14 63 15 25 64 15 65 16 26 66 16 67 16 27 28 29 30 17 17 70 18 71 18 72 18 73 19 74 19 75 20 76 20 77 20 78 21 79 21 80 21 81 22 32 82 22 83 23 33 84 23 85 23 31 34 35 36 37 86 24 87 24 88 25 89 25 90 25 91 26 92 26 93 27 94 27 95 27 96 28 38 97 28 98 29 39 99 29 100 29 40 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 3-13: Timing Channels Map (Continued) % Value DMX 104 31 41 105 31 106 32 107 32 108 32 109 33 110 33 111 34 112 34 113 34 42 43 44 114 35 45 115 35 116 36 46 117 36 118 36 47 48 49 50 51 119 37 120 37 121 38 122 38 123 38 124 39 125 39 126 39 127 40 128 40 129 41 130 41 131 41 132 42 52 133 42 134 43 53 135 43 136 43 54 55 56 57 38 = Seconds 137 44 138 44 139 45 140
OPERATION : VL3015LT SPOT LUMINAIRE TIMING 3 Table 3-13: Timing Channels Map (Continued) % Value DMX = Seconds 146 47 147 48 58 148 48 149 49 59 150 49 151 49 60 61 62 63 50 50 154 50 155 51 156 51 157 52 158 52 159 52 160 53 161 53 162 54 163 54 164 54 165 55 65 166 55 167 56 66 168 56 169 56 64 67 68 69 70 170 57 171 57 172 58 173 58 174 58 175 59 176 59 177 59 178 60 179 60 180 65 181 65 182 65 183 70 72 184 70 18
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 3-13: Timing Channels Map (Continued) % Value DMX 188 80 74 189 80 190 85 191 85 192 85 193 90 194 90 195 95 196 95 75 76 77 197 95 198 100 78 199 100 200 110 79 201 110 202 110 80 81 82 83 84 203 120 204 120 205 120 206 130 207 130 208 140 209 140 210 140 211 150 212 150 213 160 214 160 215 160 216 170 85 217 170 218 180 86 219 180 220 180 87 88 89 40 = Seconds 221 190 2
OPERATION : VL3015LT SPOT LUMINAIRE TIMING 3 Table 3-13: Timing Channels Map (Continued) % Value DMX = Seconds 90 230 220 231 230 232 230 233 230 91 234 240 92 235 240 236 250 93 237 250 238 250 94 95 96 260 260 241 270 242 270 243 270 244 280 245 280 246 290 247 290 248 290 249 300 98 250 300 251 310 99 252 310 253 310 97 100 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Updating Software USB Download and Programming To download files with a PC equipped with a Universal Serial Bus (USB) port, you need the VARI❋LITE USB Luminaire Programming Kit (28.8500.0054). The USB Luminaire Programming Kit can be ordered directly from your Authorized VARI❋LITE Dealer. The VARI❋LITE USB Luminaire Programming Kit (28.8500.0054) includes: • VARI❋LITE USB Upload Cable (25.9600.0001) • USB Luminaire Programming Kit CD (87.8500.
OPERATION : UPDATING SOFTWARE Lists specific versions of downloaded software (on PC) Click to download specific software version to connected luminaire(s) 3 Device Connection Status and USB Downloader Controls Click logo to go to Vari-Lite web site (internet connection required) Download History Will show current progress of download Figure 3-4: VL Download Program Window Transferring Software From Luminaire to Luminaire It is possible to transfer specific software versions between luminaires.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL A DMX termination connector is used in this process. Refer to page 14 for more information regarding the construction of this connector. Master luminaire containing software version to download Luminaire 1 requiring update Luminaire 2 requiring update AC In AC In AC In Data Thru Data Thru Data In DMX Termination Figure 3-5: Software Transfer Setup Transfer Procedure This procedure is used to transfer software versions between luminaires.
CHAPTER 4. Menu System This chapter contains instructions for operating the luminaire using the Menu Display feature. • Menu Operation • Menu Functions • Self-Tests 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Menu Operation What Is the Menu System? The menu system is a programmable set of commands used to configure, address, operate, and test the luminaire. The menu system is controlled at the Menu Display available at the enclosure input panel. Menu Display Figure 4-1: Menu Display Location Controls Operation The menu system is controlled by four buttons. These buttons function as follows: [Menu] button.
MENU SYSTEM : MENU OPERATION 4 To enter the menu system, first press [Menu]. The functions displayed will be 1st level functions. Scroll through the 1st level functions by pressing [Up] / [Down] arrows. Once the desired function appears in the display, press [Enter]. You are now at the 2nd level. Once again, press the [Up] / [Down] arrows to scroll through 2nd level functions. Press [Enter] to access 3rd level functions and so forth.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Menu Functions VL3015LT Spot Menu System Overview The following is a graphic representation of the entire menu system.
MENU SYSTEM : MENU FUNCTIONS 4 VL3015LT Spot Menu System Function Chart The following is a detailed look at the internal menu system.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Table 4-1: VL3015LT Spot Menu System Chart 1st Level DMX DMX Data 2nd Level 3rd Level 4th Level 5thLevel DATA Channel XXX DMX Channel (1 through 36) XXXX Current DMX Value for selected channel Pan/Tilt Pan and Tilt Options Swap Swap Pan & Tilt ON Inv Pan Invert Pan ON OFF OFF Inv Tilt Invert Tilt ON OFF Fixture Manual* Manual Commands 50 Status Status/Error Display Scrolls error messages or displays OK Re-Cal Recalibrate OK? Recalibrate t
MENU SYSTEM : MENU FUNCTIONS 4 Table 4-1: VL3015LT Spot Menu System Chart 1st Level Test 2nd Level 3rd Level All Seq Test All mechanisms - sequence through each mechanism RUN TEST Run-Test in Progress Pan/Tilt RUN TEST Run-Test in Progress Pan RUN TEST Run-Test in Progress Tilt RUN TEST Run-Test in Progress Dimmer RUN TEST Run-Test in Progress Strobe RUN TEST Run-Test in Progress Cyan RUN TEST Run-Test in Progress Yellow RUN TEST Run-Test in Progress Magenta RUN TEST Run-Test in Progre
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Menu Function Definitions For easy reference, each possible menu item is listed alphabetically in the first column by its display abbreviation. The second column follows with a definition of the abbreviation and then a third column provides an explanation of its purpose and function. Table 4-2: Menu Function Definitions 52 Display Definition Purpose 10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
MENU SYSTEM : MENU FUNCTIONS 4 Table 4-2: Menu Function Definitions (Continued) Display Definition Lamp Lamp Purpose Accesses lamp power-up options, reset and information (Config) or presets the Zoom and Edge to a specific setting for Lamp adjustment (Test). Lamp OFF Lamp is Off Lamp ON Lamp is On Configures arc luminaire so that lamp will strike upon power up. LampHour Lamp Hours Displays total number of lamp operating hours. Displays unique luminaire ID number.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Self-Tests Running Parameter Tests The luminaire is capable of running self-tests by using the Test menu functions. When running tests on multiple luminaires, a DMX termination connector is required at the last luminaire in the link. Refer to “Connecting Data and Power” on page 18 for more information regarding the construction of this connector. Note: After 10 seconds of inactivity, the menu display will change to the default state showing the address.
MENU SYSTEM : SELF-TESTS 4 Movement Disable The Movement option allows pan and tilt to be disabled so that the luminaire can be placed in any position for testing without movement occurring. In order to regain full control of the luminaire, Movement will need to be enabled after testing. Note: When using the Movement option, pan and tilt will be disabled for all the luminaires that are linked.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Notes 56 1 3 Dec emb er 2 012 02 .9 698.
APPENDIX A. Luminaire Care and Routine Maintenance This appendix provides instructions for troubleshooting and routine maintenance which may be necessary during the life of the luminaire. • Equipment Handling • Troubleshooting • Routine Maintenance WARNING: All maintenance procedures are to be performed with power removed from the luminaire. Never remove covers or backcap while lamp is in operation. 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Equipment Handling Below are some basic tips and information on handling luminaires and their associated components. Locations/Use VARI❋LITE luminaires are designed for dry locations only. Exposure to rain or moisture (including, but not limited to, fog machines, misters, etc.,) may damage luminaire. Lamps Servicing • When handling a lamp, hold it by the ceramic base while wearing cotton gloves or finger cots. Do not touch the glass envelope (bulb).
TROUBLESHOOTING AND MAINTENANCE A compounds is greater around the top electrode than the bottom electrode. In addition, the fill components that are difficult to vaporize congeal around the bottom electrode, thereby reducing lamp life. Solid State Electronics Electrostatic Discharge (ESD) Electrostatic discharge (ESD) presents a significant danger to solid state electronic components (semiconductor devices and PC board assemblies).
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Troubleshooting Error Messages If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu Display will cycle through any applicable error message(s) until the end of the list is reached. To review the error messages again, it will be necessary to access them using the Status function. To access error messages: Step 1. Press [Menu]. Step 2. Press [Up] / [Down] arrows until Fixture appears. Press [Enter]. Step 3.
TROUBLESHOOTING AND MAINTENANCE A Troubleshooting Guide If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart below provides possible causes and remedies for various error messages and/or symptoms. Table A-2: Troubleshooting Chart Message Symptom Description Lamp Power Douse Lamp does not strike upon start-up Lamp Off option is configured n/a Lamp douses frequently Lamp Douse Fan failure... - check fans for proper connection and operation.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Routine Maintenance Lamp Replacement WARNING: Ensure that power is removed from luminaire when installing lamp. CAUTION: Wear cotton gloves or other covering while installing lamp. Touching lamp glass with bare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If touched, use alcohol and cotton cloth to thoroughly clean glass portion of lamp. To replace lamp: Step 1. Ensure power is removed from luminaire. Step 2.
TROUBLESHOOTING AND MAINTENANCE A Align Lamp The design of the VL3015LT Spot Luminaire optical system allows for a flat or peaked field. A flat field is one where there is no detectable hot spot and a peaked field is one where the intensity of the beam is greater at the center of the beam than at the perimeter. After a new lamp is installed, it will be necessary to align the lamp to optimize the beam. Knobs located at the luminaire’s backcap will allow adjustment.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Gobo Replacement - Gobo Wheels Tools: #2 Phillips screwdriver WARNING: Remove power from luminaire before performing maintenance. Gobos may be HOT after operation. Allow to cool before replacing. To replace a rotating gobo: Step 1. Remove power from luminaire. Step 2. Remove top and/or bottom head cover by loosening four 1/4-turn screws to access the three gobos wheels. Step 3.
TROUBLESHOOTING AND MAINTENANCE A Top Head Cover * 1/4-Turn Screw (4 per head cover) Gobo Wheel (see detail) Bottom Head Cover * * Head covers are attached by tethers. CAUTION: Do not touch glass with bare fingers. Press on gobo carrier only. ROTATING GOBO WHEELS Rotating Gobo Wheel Front of luminaire Gobo Assembly Carrier Press from this side Figure A-3: Replacing Gobos 02.96 98.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Fixed Color Filter Replacement Tools: #2 Phillips screwdriver WARNING: Remove power from luminaire before performing maintenance. Filters may be HOT after operation. Allow to cool before replacing. To replace a fixed color filter on Color Wheel 1 (closest to the lamp): Step 1. Remove power from luminaire. Step 2. Remove bottom (relative to backcap label) head cover by loosening the four 1/4-turn screws. Step 3.
TROUBLESHOOTING AND MAINTENANCE A Fixed Color Filter Replacement (continued) Step 6. Orienting coated side of filter towards lamp, slide new filter under the spring clip until it is securely retained by the lock pins. Step 7. Replace the head cover. Top Head Cover * 1/4-Turn Screw Color Wheel (see detail) Bottom Head Cover * * Head covers are attached by tethers. FIXED COLOR WHEELS Color Filter Color Filter Fixed Color Wheel Assembly With Color Wheels (Note, shown removed for clarity only.
VARI❋LITE VL3015LT SPOT LUMINAIRE USER’S MANUAL Cleaning Optics, Filters and Gobos WARNING: Remove power from luminaire before performing maintenance. WARNING: Acetone is a harsh cleaning agent and solvent. Acetone is very flammable. Please handle acetone according to manufacturer’s safety instructions and precautions. The front lens, optics/color filters, and reflector may require cleaning after extended use. • FRONT LENS: Use a isopropyl alcohol with a soft, lint-free cloth to clean the front lens.
APPENDIX B. Technical Specifications VL3015LT Spot Luminaire PROGRAMMABLE FUNCTIONS Color System Six color control wheels total. A three filter CMY cross fading system, two fixed color wheels with five interchangeable color filters each capable of continuous wheel rotation for additional effects, and a variable CTO color temperature correction wheel. Zoom Optics A 13-element 10:1 zoom optics system, covering a range from 6° to 60°.
VARI❋LITE - VL3015LT SPOT LUMINAIRE USER’S MANUAL OPTICAL Source Triple wattage, double-ended lamp. The lamp is capable of operation at 900W, 1200W or 1650W mode selectable from fixture or console. Color Temperature 6000K at 1650W and 6300K at 900W and 1200W Output 42,487 lumens Reflector Precision glass reflector with dichroic cold mirror coating. Color Filter Fixed wheel color filters: .044" thick, 2.039" diameter. Gobo Gobos are E size. Metal gobos are not acceptable.
B TECHNICAL SPECIFICATIONS Dimensions Hangs on 31.0 inch (79 cm) centers. Luminaire can be mounted and operated in any orientation. 21.7 in / 551.2 mm 16.7 in / 424.2 mm 150.3o 150.3o 40.7 in / 1033.8 mm 6.1 in / 155.0 mm 19.2 in / 487.7 mm 18.0 in / 457.2 mm 270o 270o 30.5 in / 774.7 mm 14.1 in / 16.4 in / 358.1 mm 416.6 mm 33.5 in / 850.9 mm 33.5 in / 850.9 mm 32.7 in / 830.6 mm 24.3 in / 617.2 mm 02.96 98.
VARI❋LITE - VL3015LT SPOT LUMINAIRE USER’S MANUAL PHOTOMETRIC 1500W Short Arc Lamp Zoom Lens Position CENTER BEAM CANDELA CENTER BEAM FOOT-CANDLE TOTAL LUMENS FIELD ANGLE (degrees) FIELD DIAMETER TN* NFOV 1,619,083 5,168 24,097 6.3 0.1107 MFOV 555,807 11,343 38,251 25.7 0.4545 WFOV 109,368 13,950 42,487 40.3 0.7215 NOTES: A. All data taken with a seasoned light source at 20 hours of life. B. * Multiply throw distance by Tn to determine coverage. C.
Philips Vari-Lite 10911 Petal Street Dallas, Texas 75238 USA 1-877-VARI-LITE . 1-214-647-7880 www.vari-lite.com. ©2012 Philips Vari-Lite, a Philips group company. All Rights Reserved.
