User`s manual

TROUBLESHOOTING AND MAINTENANCE
A
02.9698.0002 0 13 December 2012 67
Fixed Color Filter Replacement (continued)
Step 6. Orienting coated side of filter towards lamp, slide new filter under the spring clip until it is
securely retained by the lock pins.
Step 7. Replace the head cover.
Figure A-4: Replacing a Color Filter
Top Head Cover *
1/4-Turn Screw
Color Wheel
(see detail)
CAUTION:
Do not touch filter with bare fingers.
Wear cotton gloves.
Color Filter
* Head covers are attached by tethers.
Bottom Head Cover *
Assembly With Color Wheels
(Note, shown removed for clarity only.
Do not remove assembly)
Fixed Color Wheel
Color Filter
F IXED C OLOR W HEELS