R Integrated Home Networks 8050 Series Telephone/Data Hubs Instruction Manual & Structured Wiring Guide Model 8053 Model 8051 Model 8052 Model 8052 multiplex R technology, inc. 3001 Enterprise Street, Brea, CA 92821-6213, U.S.A. 714-996-4100 * 800-999-5225 * FAX_714-996-4900 www.channelplus.
Data/Telephone Hub applications POTS (Plain Old Telephone Service) Model 8053 Use a model 8053 to distribute telephone service. A single model 8053 can handle up to 9 telephones. For more phones, add one 8053 for every 8 telephones. All connectors are bridged (wired in parallel.) To distribute POTS, use either an 8051 or an 8053. All connectors are bridged (wired in parallel).
Telephone Termination Wire Color Codes Solid Color Twisted-Pair Wire Band -Stripe Twisted-Pair Wire blue/white pair 1 Option 1 - old style Dual Jack Telephone Wallplate TIP blue orange/white pair 2 Black Blue Red black TIP n /Brow TIP n blue green RING Black Gr een brown/white pair 4 Brow White white green/white Green e RING pair 3 Yellow lu White/B yellow orange Pairs 1 & 2 e ng ra /O ite h W red RING Cat5 4 pair UTP ge an Or green TIP W Green hit e/G brow
How to wire a new house The Internet, multiple phone lines, cable television, satellite systems, and high speed data links are bringing more and more information to your home. The communication wiring in most houses is overwhelmed by these requirements. It doesn’t have to be that way. During construction, providing modern cabling is surprisingly inexpensive. Run all wires to a network enclosure. In a typical house, an in-wall cabinet located at the media center will be a good choice.
Wiring the 8051 and 8400 Structured wiring basics: Phones today, data or KSU tomorrow The DoorTel system allows you to answer your front door from any telephone in the house. When the doorbell rings, pick up the nearest extension and press ‘#’. Now you may have a two-way conversation with the person ringing the bell.
Structured wiring basics: Structured wiring basics: Changing some jacks to data distribution From Telco CO1 - CO4 Connecting to a KSU From Telco CO-1 CO3 Model 8051 RJ-14 Typical wallplate Jack 1 ... Jack 2 ... Jack 3 ... Jack 4 ...
Structured wiring basics: Structured wiring basics: CAT 5 wiring techniques Alternative Ways to Mount the 8050 series hubs. 1 Wiring a Cat-5 jack Keep sheath close to jack. 2 110 punchdown tool Follow color code for T568A jacks. Position first pair to channel closest to end of jack. (Do not untwist conductor pairs more than 0.5" from the termination point.) To protect the wiring, the 8050 series hubs should be in a network enclosure.
Structured wiring basics: Specifications: dimensions W x H x D: 8051 CAT 5 Do's and Don'ts 8052/8053 Do not allow cable to kink or knot. Also, do not pull the cable with excessive force. shipping weight: 6.75" x 1.2" x 1.7" (17.1 cm x 3.1 cm x 4.3 cm) 6.75" x 1.2" x 2.2" (17.1 cm x 3.1 cm x 5.5 cm) 1 lb (0.45 kg) Warranty Bundle the cables loosely. When using tie-wraps to secure cable, do not cinch cables to where crush-stress is visible. Do not allow cables to form right angles or sharp bends.
multiplex R technology, inc. 3001 Enterprise Street, Brea, CA 92821-6213, U.S.A. 714-996-4100 * 800-999-5225 * FAX_714-996-4900 www.channelplus.
