Specifications

SATV/CATV
Section 14
286
Order Online
www.mcminone.com
NET 30
Terms
14
Splitter/Combiner
The Channel Plus
bi–directional
splitter/combiners
provide a 1GHz
bandwidth and are ideal
for antenna and coaxial cable operations. It can be
used to split a signal from a source or combine
signals from multiple sources onto one coax run.
Insertion DC & IR
Order # Description Loss Passing (ea.)
2512 2–way 3.5 dB Yes $4.75
2514 4–way 8.0 dB Yes 7.00
2538 8-way 12.0 dB No 9.75
High Frequency RFI Splitters
DirecTV compatible high frequency performance to
3GHz. •Tin-plated zinc die-cast housing with soldered
back to achieve RFI -130dB •Waterproof and airtight
up to 30 P.S.I. with 4.55mm grounding hole and
stainless steel screws •Low thru loss and high
isolation with patent pending 360° insert pin.
Bandwidth: 5MHz~3000MHz.
Fig. Order # Description (ea.) (2-up)
A 33-10245 2-way $2.79 $2.29
B 33-10246 3-way 3.19 2.79
C 33-10247 4-way 3.79 3.19
AB
C
In-Line Splitters
The in-line port design of
these splitters helps to
keep cables organized
and makes them
perfect for installations
in crowded areas.
Nickel plated zinc
die cast
construction.
Bandwidth:
5~1000MHz.
Order # Description (1-9) (10-up)
33-4865 2-way $3.02 $2.59
33-4870 3-way 4.03 3.63
33-4875 4-way 5.04 4.67
Indoor Splitters
Performance to 1000MHz. 2, 3, 4 and 8 way
models. Die-cast housing. RF shielding. Mounting
tabs and grounding blocks.
Fig Order # Description (1-9) (10-up)
A 33-2900 2-way $0.89 $0.81
B 33-2905 3-way 1.99 1.84
C 33-2910 4-way 2.99 2.94
D 33-2915 8-way 5.99 5.86
A
B
C
D
RFI Splitters
•For use in applications where additional shielding
is needed •100dB case design exceeds FCC
requirements for RF shielding •25% more zinc
content tha n standard splitters •Case thickness
increased by 50% to obtain very good RFI
performance •Mounting tabs with screws
and grounding block •5MHz~1000MHz
frequency response
Fig. Order # Type (1-9) (10-up)
A 33-2130 2-way $2.11 $1.86
B 33-2135 3-way 2.92 2.48
C 33-2140 4-way 3.42 3.01
A
B
C
Digital Splitters
• Two–way and four–way
high performance splitters
•Gold–plated inputs/outputs
•Dual–grounded connections
•5MHz to 1GHz
•Precision cast body
Order # Description (ea.)
DT2SP Two–way $4.13
DT4SP Four–way 6.30
Directional Taps
Blonder Tongue offers a
complete line of professional
quality, economical indoor
directional couplers and
tapoffs with frequency
coverage to 900MHz. Several
models are available with four
way taps in varying attenuation values.
Order # Value (1-9) (10-up)
33-3000 8dB $6.25 $5.92
33-3010 16dB 6.25 5.92
U/V Directional Taps
•Provides high isolation from reflected signals
•Maintains constant 75ohm impedance on trunk
line •Tap at 12, 17 and 23dB
Order # Description (1-9) (10-49) (50-up)
A. One Output Zinc Die-Cast
33-1175 12dB $2.89 $2.61 $2.24
33-310 17dB 2.99 2.70 2.32
33-1180 23dB 3.09 2.74 2.35
B. Two Outputs
33-1185 12dB 4.29 3.83 3.54
33-320 17dB 4.19 3.80 3.51
33-1190 23dB 4.29 3.82 3.53
C. Four Outputs
33-1195 12dB 5.99 5.62 4.77
33-330 17dB 5.89 5.36 4.55
33-1200 23dB 6.09 5.70 4.84
A
B
C
Diplexer
Combines and separates your DBS
satellite and off–air signals. TERK
diplexers deliver sharper cut–off
frequencies, lower signal loss and
better impedance matching. Low quality diplexers
can cause signal loss and poor picture quality. High
quality die–cast aluminum housing. Specifications:
Frequency response: 54~2150MHz. Impedance:
75ohm. Insertion loss: Antenna, 1dB, Satellite, 2dB.
Return loss: 10dB. Isolation: Antenna, 40dB, Satellite,
40dB. Mfr. #BDS-21BP.
Order # (ea.)
33-7235 $9.95
Satellite Diplexer
•Zinc die-cast housing •RFI
shielding •Power passive
satellite port •Includes
grounding screw
•Bandwidth: 40~2150MHz
Order # (1-9) (10-up)
33-8620 $2.59 $2.07
Budget Diplexer
Zinc plated die cast diplexer
to combine off air television
signals with satellite for ease of
system installation. Power
passive one port. Bandwidth:
40~2150MHz.
Order # (1-9) (10-up)
33-4810 $2.99 $2.56
Diplexer
Combine off air television
signals with satellite for ease
of system installation. Power
passive one port. Bandwidth:
5~800MHz/950~2050MHz.
Order # Description (1-9) (10-up)
33-4805 Commercial Grade $10.09 $9.35
33-4800 High Performance 6.99 6.17
VHF/UHF/Satellite
Diplexer-Mixer
The TSDM-2150 is a compact
television antenna satellite
diplexer/combiner used in
applications that require
satellite I.F. distribution from 950~2150MHz. The
TSDM-2150 uses a rugged case that allows for
outdoor use. Specifications: •Frequency range:
Satellite: 950~2150MHz, television antenna:
40~860MHz •Connectors: “F” type •EMI
performance: >80dB
Order # (1-9) (10-49) (50-up)
33-2710 $4.99 $4.79 $4.49
Satellite Diplexers
The 4001IFD and 4002IFD
diplexers are used for
separating or combining
satellite signals at 950~2150MHz
with VHF/UHF signals at
54~806MHz. In addition, a DC
power pass is provided from the
satellite port to the common in order to pass satellite
receiver LNB voltage. Model 4022IFD contains two
4002IFD diplexers and a VHF/UHF signal splitter.
When used with a twin LNB, diplexed satellite and
VHF/UHF signals are provided to two locations within
a building. Model 4032IFD is identical except DC is
passed from one output to the VHF/UHF input for
preamplifier power.
Order # Mfr. # (ea.)
33-9415 4001IFD $9.00
33-9420 4002IFD 17.88
33-9430 4022IFD 25.61
33-9435 4032IFD 24.84
C51 pg 286 7/31/06 12:17 PM Page 286